| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211011073934.34340-7-krzysztof.kozlowski@canonical.com>
Date: Mon, 11 Oct 2021 09:39:32 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Charles Gorand <charles.gorand@...innov.com>,
Mark Greer <mgreer@...malcreek.com>, linux-nfc@...ts.01.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-wireless@...r.kernel.org
Subject: [PATCH v2 6/8] dt-bindings: nfc: st,nci: convert to dtschema
Convert the ST NCI (ST21NFCB) NFC controller to DT schema format.
Changes during bindings conversion:
1. Add a new required "reg" property for SPI binding, because SPI child
devices use it as chip-select.
2. Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also
never used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
---
.../bindings/net/nfc/st,st-nci.yaml | 106 ++++++++++++++++++
.../bindings/net/nfc/st-nci-i2c.txt | 38 -------
.../bindings/net/nfc/st-nci-spi.txt | 36 ------
3 files changed, 106 insertions(+), 74 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
delete mode 100644 Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
delete mode 100644 Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
new file mode 100644
index 000000000000..a6a1bc788d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST NCI NFC controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
+
+properties:
+ compatible:
+ enum:
+ - st,st21nfcb-i2c
+ - st,st21nfcb-spi
+ - st,st21nfcc-i2c
+
+ reset-gpios:
+ description: Output GPIO pin used for resetting the controller
+
+ ese-present:
+ type: boolean
+ description: |
+ Specifies that an ese is physically connected to the controller
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency: true
+
+ uicc-present:
+ type: boolean
+ description: |
+ Specifies that the uicc swp signal can be physically connected to the
+ controller
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - reset-gpios
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,st21nfcb-i2c
+ - st,st21nfcc-i2c
+then:
+ properties:
+ spi-max-frequency: false
+else:
+ required:
+ - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@8 {
+ compatible = "st,st21nfcb-i2c";
+ reg = <0x08>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+ ese-present;
+ uicc-present;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@0 {
+ compatible = "st,st21nfcb-spi";
+ reg = <0>;
+
+ spi-max-frequency = <4000000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+ ese-present;
+ uicc-present;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
deleted file mode 100644
index baa8f8133d19..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* STMicroelectronics SAS. ST NCI NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- reset-gpios: Output GPIO pin used to reset the ST21NFCB
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
-
-&i2c2 {
-
-
- st21nfcb: st21nfcb@8 {
-
- compatible = "st,st21nfcb-i2c";
-
- reg = <0x08>;
- clock-frequency = <400000>;
-
- interrupt-parent = <&gpio5>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
- reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
- ese-present;
- uicc-present;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
deleted file mode 100644
index d33343330b94..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* STMicroelectronics SAS. ST NCI NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfcb-spi"
-- spi-max-frequency: Maximum SPI frequency (<= 4000000).
-- interrupts: GPIO interrupt to which the chip is connected
-- reset-gpios: Output GPIO pin used to reset the ST21NFCB
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
-
-&mcspi4 {
-
-
- st21nfcb: st21nfcb@0 {
-
- compatible = "st,st21nfcb-spi";
-
- clock-frequency = <4000000>;
-
- interrupt-parent = <&gpio5>;
- interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-
- reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
- ese-present;
- uicc-present;
- };
-};
--
2.30.2
Powered by blists - more mailing lists