| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Oct 2021 09:52:59 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: "Chindris, Mihail" <Mihail.Chindris@...log.com>
CC: Jonathan Cameron <jic23@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"lars@...afoo.de" <lars@...afoo.de>,
"Hennerich, Michael" <Michael.Hennerich@...log.com>,
"Sa, Nuno" <Nuno.Sa@...log.com>,
"Bogdan, Dragos" <Dragos.Bogdan@...log.com>,
"alexandru.ardelean@...log.com" <alexandru.ardelean@...log.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
On Mon, 11 Oct 2021 08:37:44 +0000
"Chindris, Mihail" <Mihail.Chindris@...log.com> wrote:
> > -----Original Message-----
> > From: Jonathan Cameron <jic23@...nel.org>
> > Sent: Sunday, 10 October 2021 17:49
> > To: Chindris, Mihail <Mihail.Chindris@...log.com>
> > Cc: linux-kernel@...r.kernel.org; linux-iio@...r.kernel.org;
> > lars@...afoo.de; Hennerich, Michael <Michael.Hennerich@...log.com>;
> > Sa, Nuno <Nuno.Sa@...log.com>; Bogdan, Dragos
> > <Dragos.Bogdan@...log.com>; alexandru.ardelean@...log.com; Mark
> > Brown <broonie@...nel.org>
> > Subject: Re: [PATCH v2 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
> >
> > On Fri, 8 Oct 2021 12:39:08 +0000
> > Mihail Chindris <mihail.chindris@...log.com> wrote:
> >
> > > Add documentation for ad3552r
> > >
> > > Signed-off-by: Mihail Chindris <mihail.chindris@...log.com>
> > Hi Mihael,
> >
> > A few comments inline.
> >
> > Thanks,
> >
> > Jonathan
Just realized this is missing cc for Rob + dt list which is a must for
any new binding doc. Query for Rob inline.
Thanks,
Jonathan
> >
> > > ---
> > > .../bindings/iio/dac/adi,ad3552r.yaml | 199 ++++++++++++++++++
> > > 1 file changed, 199 insertions(+)
> > > create mode 100644
> > > Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > > b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > > new file mode 100644
> > > index 000000000000..1086e935d330
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > > @@ -0,0 +1,199 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2020
> > > +Analog Devices Inc.
> > > +%YAML 1.2
> > > +---
> > > +$id:
> > > +https://urldefense.com/v3/__http://devicetree.org/schemas/iio/dac/adi
> > >
> > +,ad3552r.yaml*__;Iw!!A3Ni8CS0y2Y!pqvd1NyV8G8KXIcfAtV1erPpylxLUGXD
> > 1Tx5
> > > +UoK2MMNNgQpv5RSyFb6NQDSL0sEuJOI$
> > > +$schema:
> > > +https://urldefense.com/v3/__http://devicetree.org/meta-
> > schemas/core.y
> > >
> > +aml*__;Iw!!A3Ni8CS0y2Y!pqvd1NyV8G8KXIcfAtV1erPpylxLUGXD1Tx5UoK2
> > MMNNgQ
> > > +pv5RSyFb6NQDSL3G5680U$
> > > +
> > > +title: Analog Devices AD2552R DAC device driver
> > > +
> > > +maintainers:
> > > + - Mihail Chindris <mihail.chindris@...log.com>
> > > +
> > > +description: |
> > > + Bindings for the Analog Devices AD3552R DAC device. Datasheet can
> > > +be
> >
> > Extra space before DAC, and doesn't mention the other supported part.
> > One option to avoid a never ending list is "and similar."
> >
> > > + found here:
> > > +
> > > + https://www.analog.com/media/en/technical-documentation/data-
> > sheets/
> > > + ad3552r.pdf
> >
> > Good to have datasheet for the other part as well as I don't think this is a
> > shared datasheet?
> >
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - adi,ad3552r
> > > + - adi,ad3542r
> >
> > Alphabetical order preferred.
> >
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + spi-max-frequency:
> > > + maximum: 30000000
> > > +
> > > + reset-gpios:
> > > + maxItems: 1
> > > +
> > > + ldac-gpios:
> > > + description: |
> > > + If a LDAC gpio is specified it will generate a LDAC pulse each time the
> > > + trigger handler sends data to the chip.
> >
> > Trigger handler is a linux concept. You need to write this more generically.
> > Something like.
> >
> > "LDAC pin is used as a hardware trigger to update a set of DACs."
> >
> >
> > > + maxItems: 1
> > > +
> > > + vref-supply:
> > > + description:
> > > + The regulator to use as an external reference. If it does not exists the
> > > + internal reference will be used. External reference must be
> > > + 2.5V
> > > +
> > > + adi,vref-out-en:
> > > + description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
> > > + will be floating.
> > > + type: boolean
> > > +
> > > + adi,sdo-drive-strength:
> > > + description: |
> > > + Configure SDIO0 and SDIO1 strength levels:
> > > + - 0: low SDO drive strength.
> > > + - 1: medium low SDO drive strength.
> > > + - 2: medium high SDO drive strength.
> > > + - 3: high SDO drive strength
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + enum: [0, 1, 2, 3]
> > > +
> > > +patternProperties:
> > > + "^channel@([0-1])$":
> > > + type: object
> > > + description: Configurations of the DAC Channels
> > > + properties:
> > > + reg:
> > > + description: Channel number
> > > + enum: [0, 1]
> > > +
> > > + custom-output-range-config:
> >
> > Not a generic property so I think this needs an adi prefix.
>
> I tried with adi prefix but I get weird errors while running dt_binding_check for properties with adi prefix and with type:object
> Do you have any suggestion for this issues?
@Rob
>
> > > + type: object
> > > + description: Configuration of custom range when
> > > + adi,output-range-microvolt is not present.
> > > + The formulas for calculation the output voltages are
> > > + Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
> > > + Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
> > > + properties:
> > > + adi,gain-offset:
> > > + description: Gain offset used in the above formula
> > > + $ref: /schemas/types.yaml#/definitions/int32
> > > + maximum: 511
> > > + minimum: -511
> > > + adi,gain-scaling-p:
> > > + description: |
> > > + Scaling p:
> > > + 0: 1.0
> > > + 1: 0.5
> > > + 2: 0.25
> > > + 3: 0.125
> >
> > Given this is just a mapping to a simple set of values, could we just have the
> > values or express it as 1/(2^GainP) in the equation above and call it
> > adi,gain-scalling-inv-log2 or something like that?
> >
> > If we can avoid a mapping table that is always a nice to have
> >
> >
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + enum: [0, 1, 2, 3]
> > > + adi,gain-scaling-n:
> > > + description: |
> > > + Scaling p:
> > > + 0: 1.0
> > > + 1: 0.5
> > > + 2: 0.25
> > > + 3: 0.125
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + enum: [0, 1, 2, 3]
> > > + adi,rfb-ohms:
> > > + description: Feedback Resistor
> > > + required:
> > > + - adi,gain-offset
> > > + - adi,gain-sacling-p
> > > + - adi,gain-sacling-n
> > > + - adi,rfb-ohms
> > > + required:
> > > + - reg
> > > +
> > > + oneOf:
> > > + # If adi,output-range is missing, custom-output-range-config
> > > + must be used
> >
> > adi,output-range-microvolt is missing...
> >
> > > + - required:
> > > + - adi,output-range-microvolt
> > > + - required:
> > > + - custom-output-range-config
> > > +
> > > +allOf:
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + const: adi,ad3542r
> > > + then:
> > > + patternProperties:
> > > + "^channel@([0-1])$":
> > > + type: object
> > > + properties:
> > > + adi,output-range-microvolt:
> > > + description: |
> > > + Voltage output range of the channel as <minimum, maximum>
> > > + Required connections:
> > > + Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
> > > + Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
> > > + oneOf:
> > > + - items:
> > > + - const: 0
> > > + - enum: [2500000, 3000000, 5000000, 10000000]
> > > + - items:
> > > + - const: -2500000
> > > + - const: 7500000
> > > + - items:
> > > + - const: -5000000
> > > + - const: 5000000
> > > + required:
> > > + - adi,output-range-microvolt
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + const: adi,ad3552r
> > > + then:
> > > + patternProperties:
> > > + "^channel@([0-1])$":
> > > + type: object
> > > + properties:
> > > + adi,output-range-microvolt: |
> > > + Voltage output range of the channel as <minimum, maximum>
> > > + Required connections:
> > > + Rfb1x for: 0 to 2.5 V; 0 to 5 V;
> > > + Rfb2x for: 0 to 10 V; -5 to 5 V;
> > > + Rfb4x for: -10 to 10V
> > > + oneOf:
> > > + - items:
> > > + - const: 0
> > > + - enum: [2500000, 5000000, 10000000]
> > > + - items:
> > > + - const: -5000000
> > > + - const: 5000000
> > > + - items:
> > > + - const: -10000000
> > > + - const: 10000000
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - spi-max-frequency
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + ad3552r {
> > > + compatible = "adi,ad3552r";
> > > + reg = <0>;
> > > + spi-max-frequency = <20000000>;
> > > + channel@0 {
> > > + reg = <0>;
> > > + adi,output-range-microvolt = <0 10000000>;
> > > + };
> > > + channel@1 {
> > > + reg = <1>;
> > > + custom-output-range-config {
> > > + adi,gain-offset = <5>;
> > > + adi,gain-scaling-p = <1>;
> > > + adi,gain-scaling-n = <2>;
> > > + adi,rfb-ohms = <1>;
> > > + };
> > > + };
> > > + };
> > > +...
>
Powered by blists - more mailing lists