linux-kernel - [PATCH 5.10 28/83] ARM: dts: imx6qdl-pico: Fix Ethernet support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211011134509.333931834@linuxfoundation.org>
Date:   Mon, 11 Oct 2021 15:45:48 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Fabio Estevam <festevam@...il.com>,
        Andrew Lunn <andrew@...n.ch>, Shawn Guo <shawnguo@...nel.org>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 28/83] ARM: dts: imx6qdl-pico: Fix Ethernet support

From: Fabio Estevam <festevam@...il.com>

[ Upstream commit 450e7fe9b1b3c90eeed74a2fe0eeb13a7b57f3da ]

Currently, it is no longer possible to retrieve a DHCP address
on the imx6qdl-pico board.

This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").

Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.

Fixes: 98670a0bb0ef14bbb3 ("ARM: dts: imx6qdl: Add imx6qdl-pico support")
Signed-off-by: Fabio Estevam <festevam@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/boot/dts/imx6qdl-pico.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
index 5de4ccb97916..f7a56d6b160c 100644
--- a/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
-- 
2.33.0