| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Oct 2021 17:22:11 +0300
From: <alexandru.tachici@...log.com>
To: <andrew@...n.ch>
CC: <o.rempel@...gutronix.de>, <alexandru.tachici@...log.com>,
<davem@...emloft.net>, <devicetree@...r.kernel.org>,
<hkallweit1@...il.com>, <kuba@...nel.org>,
<linux-kernel@...r.kernel.org>, <linux@...linux.org.uk>,
<netdev@...r.kernel.org>, <robh+dt@...nel.org>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH v3 4/8] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for
industrial Ethernet applications and is compliant with the IEEE 802.3cg
Ethernet standard for long reach 10 Mb/s Single Pair Ethernet.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
---
drivers/net/phy/Kconfig | 7 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/adin1100.c | 279 +++++++++++++++++++++++++++++++++++++
3 files changed, 287 insertions(+)
create mode 100644 drivers/net/phy/adin1100.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 902495afcb38..2f65d39e0f2c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -83,6 +83,13 @@ config ADIN_PHY
- ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
Ethernet PHY
+config ADIN1100_PHY
+ tristate "Analog Devices Industrial Ethernet T1L PHYs"
+ help
+ Adds support for the Analog Devices Industrial T1L Ethernet PHYs.
+ Currently supports the:
+ - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
+
config AQUANTIA_PHY
tristate "Aquantia PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index b2728d00fc9a..b82651b57043 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -31,6 +31,7 @@ sfp-obj-$(CONFIG_SFP) += sfp-bus.o
obj-y += $(sfp-obj-y) $(sfp-obj-m)
obj-$(CONFIG_ADIN_PHY) += adin.o
+obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
obj-$(CONFIG_AMD_PHY) += amd.o
aquantia-objs += aquantia_main.o
ifdef CONFIG_HWMON
diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
new file mode 100644
index 000000000000..dc5c1987dc43
--- /dev/null
+++ b/drivers/net/phy/adin1100.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Driver for Analog Devices Industrial Ethernet T1L PHYs
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/property.h>
+
+#define PHY_ID_ADIN1100 0x0283bc81
+
+static const int phy_10_features_array[] = {
+ ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+};
+
+#define ADIN_CRSM_SFT_RST 0x8810
+#define ADIN_CRSM_SFT_RST_EN BIT(0)
+
+#define ADIN_CRSM_SFT_PD_CNTRL 0x8812
+#define ADIN_CRSM_SFT_PD_CNTRL_EN BIT(0)
+
+#define ADIN_CRSM_STAT 0x8818
+#define ADIN_CRSM_SFT_PD_RDY BIT(1)
+#define ADIN_CRSM_SYS_RDY BIT(0)
+
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * tx_level_2v4_able set if the PHY supports 2.4V TX levels (10BASE-T1L)
+ * tx_level_2v4 set if the PHY requests 2.4V TX levels (10BASE-T1L)
+ * tx_level_prop_present set if the TX level is specified in DT
+ */
+struct adin_priv {
+ unsigned int tx_level_2v4_able:1;
+ unsigned int tx_level_2v4:1;
+ unsigned int tx_level_prop_present:1;
+};
+
+static void adin_mii_adv_m_to_ethtool_adv_t(unsigned long *advertising, u32 adv)
+{
+ if (adv & MDIO_AN_T1_ADV_M_B10L)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, advertising);
+}
+
+static int adin_read_lpa(struct phy_device *phydev)
+{
+ int val;
+
+ linkmode_zero(phydev->lp_advertising);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
+ if (val < 0)
+ return val;
+
+ if (!(val & MDIO_AN_STAT1_COMPLETE)) {
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ return 0;
+ }
+
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->lp_advertising);
+
+ /* Read the link partner's base page advertisement */
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_L);
+ if (val < 0)
+ return val;
+
+ phydev->pause = val & MDIO_AN_T1_LP_L_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = val & MDIO_AN_T1_LP_L_PAUSE_ASYM ? 1 : 0;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_M);
+ if (val < 0)
+ return val;
+
+ adin_mii_adv_m_to_ethtool_adv_t(phydev->lp_advertising, val);
+
+ return 0;
+}
+
+static int adin_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_read_link(phydev);
+ if (ret)
+ return ret;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ ret = adin_read_lpa(phydev);
+ if (ret)
+ return ret;
+
+ phy_resolve_aneg_linkmode(phydev);
+ } else {
+ /* Only one mode & duplex supported */
+ linkmode_zero(phydev->lp_advertising);
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ return ret;
+}
+
+static int adin_config_aneg(struct phy_device *phydev)
+{
+ struct adin_priv *priv = phydev->priv;
+ int ret;
+
+ /* No sense to continue if auto-neg is disabled,
+ * only one link-mode supported.
+ */
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ return 0;
+
+ /* Request increased transmit level from LP. */
+ if (priv->tx_level_prop_present && priv->tx_level_2v4) {
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H,
+ MDIO_AN_T1_ADV_H_10L_TX_HI |
+ MDIO_AN_T1_ADV_H_10L_TX_HI_REQ);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Disable 2.4 Vpp transmit level. */
+ if ((priv->tx_level_prop_present && !priv->tx_level_2v4) || !priv->tx_level_2v4_able) {
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H,
+ MDIO_AN_T1_ADV_H_10L_TX_HI |
+ MDIO_AN_T1_ADV_H_10L_TX_HI_REQ);
+ if (ret < 0)
+ return ret;
+ }
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_CTRL, BMCR_ANRESTART);
+}
+
+static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
+{
+ int ret;
+ int val;
+
+ if (en)
+ val = ADIN_CRSM_SFT_PD_CNTRL_EN;
+ else
+ val = 0;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN_CRSM_SFT_PD_CNTRL, val);
+ if (ret < 0)
+ return ret;
+
+ return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
+ (ret & ADIN_CRSM_SFT_PD_RDY) == val,
+ 1000, 30000, true);
+}
+
+static int adin_suspend(struct phy_device *phydev)
+{
+ return adin_set_powerdown_mode(phydev, true);
+}
+
+static int adin_resume(struct phy_device *phydev)
+{
+ return adin_set_powerdown_mode(phydev, false);
+}
+
+static int adin_set_loopback(struct phy_device *phydev, bool enable)
+{
+ if (enable)
+ return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL,
+ BMCR_LOOPBACK);
+
+ /* PCS loopback (according to 10BASE-T1L spec) */
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL,
+ BMCR_LOOPBACK);
+}
+
+static int adin_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN_CRSM_SFT_RST, ADIN_CRSM_SFT_RST_EN);
+ if (ret < 0)
+ return ret;
+
+ return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
+ (ret & ADIN_CRSM_SYS_RDY),
+ 10000, 30000, true);
+}
+
+static int adin_get_features(struct phy_device *phydev)
+{
+ struct adin_priv *priv = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ int ret;
+ u8 val;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT);
+ if (ret < 0)
+ return ret;
+
+ /* This depends on the voltage level from the power source */
+ priv->tx_level_2v4_able = !!(ret & MDIO_PMA_10T1L_STAT_2V4_ABLE);
+
+ phydev_dbg(phydev, "PHY supports 2.4V TX level: %s\n",
+ priv->tx_level_2v4_able ? "yes" : "no");
+
+ priv->tx_level_prop_present = device_property_present(dev, "10base-t1l-2.4vpp");
+ if (priv->tx_level_prop_present) {
+ ret = device_property_read_u8(dev, "10base-t1l-2.4vpp", &val);
+ if (ret < 0)
+ return ret;
+
+ priv->tx_level_2v4 = val;
+ if (!priv->tx_level_2v4 && priv->tx_level_2v4_able)
+ phydev_info(phydev,
+ "PHY supports 2.4V TX level, but disabled via config\n");
+ }
+
+ linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array),
+ phydev->supported);
+
+ linkmode_set_bit_array(phy_10_features_array, ARRAY_SIZE(phy_10_features_array),
+ phydev->supported);
+
+ return 0;
+}
+
+static int adin_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct adin_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static struct phy_driver adin_driver[] = {
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100),
+ .name = "ADIN1100",
+ .get_features = adin_get_features,
+ .soft_reset = adin_soft_reset,
+ .probe = adin_probe,
+ .config_aneg = adin_config_aneg,
+ .read_status = adin_read_status,
+ .set_loopback = adin_set_loopback,
+ .suspend = adin_suspend,
+ .resume = adin_resume,
+ },
+};
+
+module_phy_driver(adin_driver);
+
+static struct mdio_device_id __maybe_unused adin_tbl[] = {
+ { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin_tbl);
+MODULE_DESCRIPTION("Analog Devices Industrial Ethernet T1L PHY driver");
+MODULE_LICENSE("Dual BSD/GPL");
--
2.25.1
Powered by blists - more mailing lists