Message-Id: <20211012183327.649865-1-geert@linux-m68k.org>
Date:   Tue, 12 Oct 2021 20:33:06 +0200
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     Miguel Ojeda <ojeda@...nel.org>
Cc:     Robin van der Gracht <robin@...tonic.nl>,
        Rob Herring <robh+dt@...nel.org>,
        Paul Burton <paulburton@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Pavel Machek <pavel@....cz>, Marek Behun <marek.behun@....cz>,
        devicetree@...r.kernel.org, linux-leds@...r.kernel.org,
        linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
        Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: [PATCH v7 00/21] auxdisplay: ht16k33: Add character display support

	Hi Miguel et al,

The Holtek HT16K33 LED controller is not only used for driving
dot-matrix displays, but also for driving segment displays.
The current auxdisplay driver is limited to dot-matrix displays, which
are exposed as a frame buffer device.

This patch series extends the driver to 4-digit 7-segment and quad
14-segment alphanumeric displays, allowing the user to display and
scroll text messages.

List of patches:
  - Patch 1 provides font data for displaying ASCII characters on
    14-segment displays,
  - Patch 2 updates the HT16K33 DT bindings for segment displays,
  - Patches 3-5 contain a bug fix and small improvements for the
    Imagination Technologies ASCII LCD Display driver,
  - Patch 6 extracts the character line display core support from the
    Imagination Technologies ASCII LCD Display driver, for reuse,
  - Patches 7-8 contain cleanups and improvements for the character line
    display core driver,
  - Patches 9-17 contain a bug fixes, cleanups and improvements for the
    HT16K33 driver, to prepare for segment display support,
  - Patch 18 adds support for 7/14-segment displays to the HT16K33
    driver,
  - Patch 19 updates the HT16K33 DT bindings to document an LED subnode,
  - Patch 20 adds segment display LED support to the HT16K33 driver,
    to make use of hardware blinking, and to expose display color,
  - Patch 21 converts the HT16K33 driver to use device properties.

Changes compared to v6[1]:
  - Add Acked-by, Reviewed-by,
  - New patch "auxdisplay: ht16k33: Fix frame buffer device blanking",
  - Add linux,default-trigger to example,
  - Add missing call to ht16k33_brightness_set() in
    ht16k33_fbdev_probe(), to make sure brightness and blinking are set
    to a sane state,
  - Integrate "auxdisplay: ht16k33: Make use of device properties" into
    this series.

Changes compared to v5[2]:
  - Add Reviewed-by,
  - Reorder operations in ht16k33_led_probe() to ease future conversion
    to device properties.

Changes compared to v4[3]:
  - Add Reviewed-by,
  - Add missing select NEW_LEDS.

Changes compared to v3[4]:
  - Combine compatible values for 7/14 segment displays into an enum,
  - Add Reviewed-by,
  - Add missing select LEDS_CLASS.

Changes compared to v2[5]:
  - Drop color property from display node,
  - Use compat_only_sysfs_link_entry_to_kobj() instead of cooking our
    own helper on top of kernfs_create_link(),
  - Use "err" instead of "error" to be consistent with existing driver
    naming style,
  - Pass "dev" instead of "client" to ht16k33_fbdev_probe() and
    ht16k33_seg_probe(),
  - Drop local variable "node",
  - Remove unneeded inclusion of <linux/leds.h> and <linux/of_device.h>,
  - Document LED subnode,
  - Remove unneeded C++ comment,
  - Make the creation of the LED device dependent on the presence of the
    "led" subnode in DT, so it can be used in dot-matrix mode too.
  - Use led_init_data() and devm_led_classdev_register_ext() to retrieve
    all LED properties from DT, instead of manual LED name construction
    based on just the "color" property.

Changes compared to v1[6]:
  - Fix type of color to uint32,
  - "refresh-rate-hz" is still required for dot-matrix displays.
  - Move "select LINEDISP" for HT16K33 symbol to correct patch,
  - Add backwards compatibility "message" symlink to img-ascii-lcd,
  - Connect backlight to fbdev in ht16k33 dot-matrix mode,
  - Set "err = -EINVAL" in switch() case that cannot happen,
  - Use "auxdisplay" instead of DRIVER_NAME in LED name.

This series has been tested using an Adafruit 0.54" Quad Alphanumeric
Red FeatherWing Display, connected to an OrangeCrab ECP5 FPGA board
running a 64 MHz VexRiscv RISC-V softcore.
7-segment display support is based purely on schematics, and has not
been tested on actual hardware.  The changes to img-ascii-lcd.c are also
untested, due to lack of hardware.

Thanks for applying!

[1] "[PATCH v6 00/19] auxdisplay: ht16k33: Add character display support"
    https://lore.kernel.org/r/20210914143835.511051-1-geert@linux-m68k.org/
[2] "[PATCH v5 00/19] auxdisplay: ht16k33: Add character display support"
    https://lore.kernel.org/r/20210811095759.1281480-1-geert@linux-m68k.org
[2] "[PATCH v4 00/19] auxdisplay: ht16k33: Add character display support"
    https://lore.kernel.org/r/20210727140459.3767788-1-geert@linux-m68k.org/
[3] "[PATCH v3 00/19] auxdisplay: ht16k33: Add character display support"
    https://lore.kernel.org/r/20210714151130.2531831-1-geert@linux-m68k.org/
[4] "[PATCH v2 00/18] auxdisplay: ht16k33: Add character display support"
    https://lore.kernel.org/r/20210625125902.1162428-1-geert@linux-m68k.org/
[5] "[PATCH 00/17] auxdisplay: ht16k33: Add character display support"
    https://lore.kernel.org/r/20210322144848.1065067-1-geert@linux-m68k.org/

Geert Uytterhoeven (21):
  uapi: Add <linux/map_to_14segment.h>
  dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays
  auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
  auxdisplay: img-ascii-lcd: Add helper variable dev
  auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit()
  auxdisplay: Extract character line display core support
  auxdisplay: linedisp: Use kmemdup_nul() helper
  auxdisplay: linedisp: Add support for changing scroll rate
  auxdisplay: ht16k33: Connect backlight to fbdev
  auxdisplay: ht16k33: Fix frame buffer device blanking
  auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize()
  auxdisplay: ht16k33: Remove unneeded error check in keypad probe()
  auxdisplay: ht16k33: Convert to simple i2c probe function
  auxdisplay: ht16k33: Add helper variable dev
  auxdisplay: ht16k33: Move delayed work
  auxdisplay: ht16k33: Extract ht16k33_brightness_set()
  auxdisplay: ht16k33: Extract frame buffer probing
  auxdisplay: ht16k33: Add support for segment displays
  dt-bindings: auxdisplay: ht16k33: Document LED subnode
  auxdisplay: ht16k33: Add LED support
  auxdisplay: ht16k33: Make use of device properties

 .../bindings/auxdisplay/holtek,ht16k33.yaml   |  32 +-
 drivers/auxdisplay/Kconfig                    |  12 +-
 drivers/auxdisplay/Makefile                   |   1 +
 drivers/auxdisplay/ht16k33.c                  | 500 ++++++++++++++----
 drivers/auxdisplay/img-ascii-lcd.c            | 205 ++-----
 drivers/auxdisplay/line-display.c             | 261 +++++++++
 drivers/auxdisplay/line-display.h             |  43 ++
 include/uapi/linux/map_to_14segment.h         | 239 +++++++++
 8 files changed, 1017 insertions(+), 276 deletions(-)
 create mode 100644 drivers/auxdisplay/line-display.c
 create mode 100644 drivers/auxdisplay/line-display.h
 create mode 100644 include/uapi/linux/map_to_14segment.h

-- 
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

Powered by blists - more mailing lists