[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211012190709.1504152-2-dinguyen@kernel.org>
Date: Tue, 12 Oct 2021 14:07:07 -0500
From: Dinh Nguyen <dinguyen@...nel.org>
To: bp@...en8.de
Cc: dinguyen@...nel.org, linux-kernel@...r.kernel.org,
linux-edac@...r.kernel.org, Michal Simek <michal.simek@...inx.com>
Subject: [PATCHv4 2/4] EDAC/synopsys: add support for version 3 of the Synopsys EDAC DDR
Adds support for version 3.80a of the Synopsys DDR controller with EDAC. This
version of the controller has the following differences:
- UE/CE are auto cleared
- Interrupts are supported by default
Reviewed-by: Michal Simek <michal.simek@...inx.com>
Signed-off-by: Dinh Nguyen <dinguyen@...nel.org>
---
v4: Add Reviewed-by
v3: Address comments from Michal Simek
use bit macro
removed extra "cleared" word from comment section about v3.0
v2: remove "This patch" from commit message
---
drivers/edac/synopsys_edac.c | 49 ++++++++++++++++++++++++++++++------
1 file changed, 42 insertions(+), 7 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index bf237fccb444..66ee37ea0acc 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -101,6 +101,7 @@
/* DDR ECC Quirks */
#define DDR_ECC_INTR_SUPPORT BIT(0)
#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
+#define DDR_ECC_INTR_SELF_CLEAR BIT(2)
/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
/* ECC Configuration Registers */
@@ -171,6 +172,10 @@
#define DDR_QOS_IRQ_EN_OFST 0x20208
#define DDR_QOS_IRQ_DB_OFST 0x2020C
+/* DDR QOS Interrupt register definitions */
+#define DDR_UE_MASK BIT(9)
+#define DDR_CE_MASK BIT(8)
+
/* ECC Corrected Error Register Mask and Shifts*/
#define ECC_CEADDR0_RW_MASK 0x3FFFF
#define ECC_CEADDR0_RNK_MASK BIT(24)
@@ -533,10 +538,16 @@ static irqreturn_t intr_handler(int irq, void *dev_id)
priv = mci->pvt_info;
p_data = priv->p_data;
- regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
- regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
- if (!(regval & ECC_CE_UE_INTR_MASK))
- return IRQ_NONE;
+ /*
+ * v3.0 of the controller has the ce/ue bits cleared automatically,
+ * so this condition does not apply.
+ */
+ if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
+ regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+ regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
+ if (!(regval & ECC_CE_UE_INTR_MASK))
+ return IRQ_NONE;
+ }
status = p_data->get_error_info(priv);
if (status)
@@ -548,7 +559,9 @@ static irqreturn_t intr_handler(int irq, void *dev_id)
edac_dbg(3, "Total error count CE %d UE %d\n",
priv->ce_cnt, priv->ue_cnt);
- writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+ /* v3.0 of the controller does not have this register */
+ if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
+ writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
return IRQ_HANDLED;
}
@@ -834,8 +847,13 @@ static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
static void enable_intr(struct synps_edac_priv *priv)
{
/* Enable UE/CE Interrupts */
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+ if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+ writel(DDR_UE_MASK | DDR_CE_MASK,
+ priv->baseaddr + ECC_CLR_OFST);
+ else
+ writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+ priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+
}
static void disable_intr(struct synps_edac_priv *priv)
@@ -890,6 +908,19 @@ static const struct synps_platform_data zynqmp_edac_def = {
),
};
+static const struct synps_platform_data synopsys_edac_def = {
+ .get_error_info = zynqmp_get_error_info,
+ .get_mtype = zynqmp_get_mtype,
+ .get_dtype = zynqmp_get_dtype,
+ .get_ecc_state = zynqmp_get_ecc_state,
+ .quirks = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR
+#ifdef CONFIG_EDAC_DEBUG
+ | DDR_ECC_DATA_POISON_SUPPORT
+#endif
+ ),
+};
+
+
static const struct of_device_id synps_edac_match[] = {
{
.compatible = "xlnx,zynq-ddrc-a05",
@@ -899,6 +930,10 @@ static const struct of_device_id synps_edac_match[] = {
.compatible = "xlnx,zynqmp-ddrc-2.40a",
.data = (void *)&zynqmp_edac_def
},
+ {
+ .compatible = "snps,ddrc-3.80a",
+ .data = (void *)&synopsys_edac_def
+ },
{
/* end of table */
}
--
2.25.1
Powered by blists - more mailing lists