linux-kernel - Re: [PATCH v3 2/2] ASoC: rt9120: Add rt9210 audio amplifier support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CADiBU39SKqSULSesj060a62YpMp1hD9ftfMPGtdcbOyZh8iPrw@mail.gmail.com>
Date:   Tue, 12 Oct 2021 11:07:43 +0800
From:   ChiYuan Huang <u0084500@...il.com>
To:     Mark Brown <broonie@...nel.org>
Cc:     oder_chiou@...ltek.com, perex@...ex.cz, tiwai@...e.com,
        Rob Herring <robh+dt@...nel.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        alsa-devel@...a-project.org, lkml <linux-kernel@...r.kernel.org>,
        cy_huang <cy_huang@...htek.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, allen lin <allen_lin@...htek.com>
Subject: Re: [PATCH v3 2/2] ASoC: rt9120: Add rt9210 audio amplifier support

ChiYuan Huang <u0084500@...il.com> 於 2021年10月12日 週二 上午10:47寫道：
>
> Mark Brown <broonie@...nel.org> 於 2021年10月8日 週五 下午8:51寫道：
> >
> > On Fri, Oct 08, 2021 at 12:50:12PM +0800, cy_huang wrote:
> >
> > > +static const struct snd_kcontrol_new rt9120_snd_controls[] = {
> > > +     SOC_SINGLE_TLV("MS Volume", RT9120_REG_MSVOL, 0, 2047, 1, digital_gain),
> > > +     SOC_SINGLE("SPK Gain", RT9120_REG_SPKGAIN, 0, 7, 0),
> >
> > Volume controls should end in Volume even if they don't have TLV
> > information so applications know how to render them.  I'll fix
> > this up as I apply.
>
> It's not linear mapping analog gain and cannot use the TLV as you said.
> Mappling table is listed like as below
> 0 -> 6dB
> 1 -> 8dB
> 2 -> 10dB
> 3 -> 12dB
> 4 -> 13dB
> 5 -> 14dB
> 6 -> 15dB
> 7 -> 16dB
>
> Do I just need to change it to 'SPK Gain Volume' to present this control item?
> Or is there any table mapping for the nonlinear TLV information?

Finally found there's 'DECLARE_TLV_DB_RANGE' that can meet the requirement.
I will fix this by the tlv db range and naming it to 'SPK Gain Volume'.
If there's any changes still needed, please feel free to let me know.