[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <486b9224d93c829ef2581bc105d8abdd@agner.ch>
Date: Tue, 12 Oct 2021 09:47:52 +0200
From: Stefan Agner <stefan@...er.ch>
To: Guido Günther <agx@...xcpu.org>
Cc: Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, Marek Vasut <marex@...x.de>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
Ondrej Jirman <megous@...ous.com>,
Lucas Stach <l.stach@...gutronix.de>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 5/5] drm: mxsfb: Set fallback bus format when the
bridge doesn't provide one
On 2021-10-11 15:41, Guido Günther wrote:
> If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIXED is
> returned. Fallback to a reasonable default (MEDIA_BUS_FMT_RGB888_1X24) in
> that case.
>
> This unbreaks e.g. using mxsfb with the nwl bridge and mipi dsi panels.
>
> Reported-by: Martin Kepplinger <martink@...teo.de>
> Signed-off-by: Guido Günther <agx@...xcpu.org>
> Reviewed-by: Lucas Stach <l.stach@...gutronix.de>
Acked-by: Stefan Agner <stefan@...er.ch>
> ---
> drivers/gpu/drm/mxsfb/mxsfb_kms.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> index d6abd2077114..e3fbb8b58d5d 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> @@ -369,6 +369,12 @@ static void mxsfb_crtc_atomic_enable(struct drm_crtc *crtc,
> drm_atomic_get_new_bridge_state(state,
> mxsfb->bridge);
> bus_format = bridge_state->input_bus_cfg.format;
> + if (bus_format == MEDIA_BUS_FMT_FIXED) {
> + dev_warn_once(drm->dev,
> + "Bridge does not provide bus format, assuming
> MEDIA_BUS_FMT_RGB888_1X24.\n"
> + "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
> + bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> + }
> }
>
> /* If there is no bridge, use bus format from connector */
Powered by blists - more mailing lists