linux-kernel - Re: [PATCH RESEND] md: allow to set the fail

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHckoCzzVP7npmU4LWedzD-f1QmkH4K0iLk_=8ptSFXrFfRoDw@mail.gmail.com>
Date:   Tue, 12 Oct 2021 16:07:22 +0800
From:   Li Feng <fengli@...rtx.com>
To:     Xiao Ni <xni@...hat.com>
Cc:     Song Liu <song@...nel.org>,
        "open list:SOFTWARE RAID (Multiple Disks) SUPPORT" 
        <linux-raid@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH RESEND] md: allow to set the fail_fast on RAID1/RAID10

Xiao Ni <xni@...hat.com> 于2021年10月12日周二 下午2:58写道：
>
> On Mon, Oct 11, 2021 at 5:42 PM Li Feng <fengli@...rtx.com> wrote:
> >
> > Xiao Ni <xni@...hat.com> 于2021年10月11日周一 下午3:49写道：
> > >
> > > Hi all
> > >
> > > Now the per device sysfs interface file state can change failfast. Do
> > > we need a new file for failfast?
> > >
> > > I did a test. The steps are:
> > >
> > > mdadm -CR /dev/md0 -l1 -n2 /dev/sdb /dev/sdc --assume-clean
> > > cd /sys/block/md0/md/dev-sdb
> > > echo failfast > state
> > > cat state
> > > in_sync,failfast
> >
> > This works,  will it be persisted to disk?
> >
>
> mdadm --detail /dev/md0 can show the failfast information. So it
> should be written in superblock.
> But I don't find how md does this. I'm looking at this.
>
Yes, I have tested that it has been persisted, but don't understand who does it.

> Regards
> Xiao
>