[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211013011622.10537-10-ansuelsmth@gmail.com>
Date: Wed, 13 Oct 2021 03:16:15 +0200
From: Ansuel Smith <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Russell King <linux@...linux.org.uk>,
John Crispin <john@...ozen.org>,
Ansuel Smith <ansuelsmth@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: [net-next PATCH v6 09/16] dt-bindings: net: dsa: qca8k: Document qca,led-open-drain binding
Document new binding qca,ignore-power-on-sel used to ignore
power on strapping and use sw regs instead.
Document qca,led-open.drain to set led to open drain mode, the
qca,ignore-power-on-sel is mandatory with this enabled or an error will
be reported.
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 05a8ddfb5483..9e6748ec13da 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -13,6 +13,17 @@ Required properties:
Optional properties:
- reset-gpios: GPIO to be used to reset the whole device
+- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open
+ drain or eeprom presence. This is needed for broken
+ devices that have wrong configuration or when the oem
+ decided to not use pin strapping and fallback to sw
+ regs.
+- qca,led-open-drain: Set leds to open-drain mode. This requires the
+ qca,ignore-power-on-sel to be set or the driver will fail
+ to probe. This is needed if the oem doesn't use pin
+ strapping to set this mode and prefers to set it using sw
+ regs. The pin strapping related to led open drain mode is
+ the pin B68 for QCA832x and B49 for QCA833x
Subnodes:
--
2.32.0
Powered by blists - more mailing lists