Message-ID: <794ca401-294f-54ed-0af2-e3c763723340@ieee.org>
Date:   Wed, 13 Oct 2021 17:30:06 -0500
From:   Alex Elder <elder@...e.org>
To:     Sireesh Kodali <sireeshkodali1@...il.com>,
        phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, elder@...nel.org
Cc:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Subject: Re: [RFC PATCH 09/17] net: ipa: Add support for using BAM as a DMA
 transport

On 9/19/21 10:08 PM, Sireesh Kodali wrote:
> BAM is used on IPA v2.x. Since BAM already has a nice dmaengine driver,
> the IPA driver only makes calls the dmaengine API.
> Also add BAM transaction support to IPA's trasaction abstraction layer.
> 
> BAM transactions should use NAPI just like GSI transactions, but just
> use callbacks on each transaction for now.

This is where things get a little more complicated.  I'm not really
familiar with the BAM interface and would really like to give this
a much deeper review, and I won't be doing that now.

At first glance, it looks reasonably clean to me, and it surprises
me a little that this different system can be used with a relatively
small amount of change.  Much looks duplicated, so it could be that
a little more work abstracting might avoid that (but I haven't looked
that closely).

					-Alex

> 
> Signed-off-by: Sireesh Kodali <sireeshkodali1@...il.com>
> ---
>   drivers/net/ipa/Makefile          |   2 +-
>   drivers/net/ipa/bam.c             | 525 ++++++++++++++++++++++++++++++
>   drivers/net/ipa/gsi.c             |   1 +
>   drivers/net/ipa/ipa_data.h        |   1 +
>   drivers/net/ipa/ipa_dma.h         |  18 +-
>   drivers/net/ipa/ipa_dma_private.h |   2 +
>   drivers/net/ipa/ipa_main.c        |  20 +-
>   drivers/net/ipa/ipa_trans.c       |  14 +-
>   drivers/net/ipa/ipa_trans.h       |   4 +
>   9 files changed, 569 insertions(+), 18 deletions(-)
>   create mode 100644 drivers/net/ipa/bam.c
> 
> diff --git a/drivers/net/ipa/Makefile b/drivers/net/ipa/Makefile
> index 3cd021fb992e..4abebc667f77 100644
> --- a/drivers/net/ipa/Makefile
> +++ b/drivers/net/ipa/Makefile
> @@ -2,7 +2,7 @@ obj-$(CONFIG_QCOM_IPA)	+=	ipa.o
>   
>   ipa-y			:=	ipa_main.o ipa_power.o ipa_reg.o ipa_mem.o \
>   				ipa_table.o ipa_interrupt.o gsi.o ipa_trans.o \
> -				ipa_gsi.o ipa_smp2p.o ipa_uc.o \
> +				ipa_gsi.o ipa_smp2p.o ipa_uc.o bam.o \
>   				ipa_endpoint.o ipa_cmd.o ipa_modem.o \
>   				ipa_resource.o ipa_qmi.o ipa_qmi_msg.o \
>   				ipa_sysfs.o
> diff --git a/drivers/net/ipa/bam.c b/drivers/net/ipa/bam.c
> new file mode 100644
> index 000000000000..0726e385fee5
> --- /dev/null
> +++ b/drivers/net/ipa/bam.c
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mutex.h>
> +#include <linux/netdevice.h>
> +#include <linux/platform_device.h>
> +
> +#include "ipa_gsi.h"
> +#include "ipa.h"
> +#include "ipa_dma.h"
> +#include "ipa_dma_private.h"
> +#include "ipa_gsi.h"
> +#include "ipa_trans.h"
> +#include "ipa_data.h"
> +
> +/**
> + * DOC: The IPA Smart Peripheral System Interface
> + *
> + * The Smart Peripheral System is a means to communicate over BAM pipes to
> + * the IPA block. The Modem also uses BAM pipes to communicate with the IPA
> + * core.
> + *
> + * Refer the GSI documentation, because BAM is a precursor to GSI and more or less
> + * the same, conceptually (maybe, IDK, I have no docs to go through).
> + *
> + * Each channel here corresponds to 1 BAM pipe configured in BAM2BAM mode
> + *
> + * IPA cmds are transferred one at a time, each in one BAM transfer.
> + */
> +
> +/* Get and configure the BAM DMA channel */
> +int bam_channel_init_one(struct ipa_dma *bam,
> +			 const struct ipa_gsi_endpoint_data *data, bool command)
> +{
> +	struct dma_slave_config bam_config;
> +	u32 channel_id = data->channel_id;
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +	int ret;
> +
> +	/*TODO: if (!bam_channel_data_valid(bam, data))
> +		return -EINVAL;*/
> +
> +	channel->dma_subsys = bam;
> +	channel->dma_chan = dma_request_chan(bam->dev, data->channel_name);
> +	channel->toward_ipa = data->toward_ipa;
> +	channel->tlv_count = data->channel.tlv_count;
> +	channel->tre_count = data->channel.tre_count;
> +	if (IS_ERR(channel->dma_chan)) {
> +		dev_err(bam->dev, "failed to request BAM channel %s: %d\n",
> +				data->channel_name,
> +				(int) PTR_ERR(channel->dma_chan));
> +		return PTR_ERR(channel->dma_chan);
> +	}
> +
> +	ret = ipa_channel_trans_init(bam, data->channel_id);
> +	if (ret)
> +		goto err_dma_chan_free;
> +
> +	if (data->toward_ipa) {
> +		bam_config.direction = DMA_MEM_TO_DEV;
> +		bam_config.dst_maxburst = channel->tlv_count;
> +	} else {
> +		bam_config.direction = DMA_DEV_TO_MEM;
> +		bam_config.src_maxburst = channel->tlv_count;
> +	}
> +
> +	dmaengine_slave_config(channel->dma_chan, &bam_config);
> +
> +	if (command)
> +		ret = ipa_cmd_pool_init(channel, 256);
> +
> +	if (!ret)
> +		return 0;
> +
> +err_dma_chan_free:
> +	dma_release_channel(channel->dma_chan);
> +	return ret;
> +}
> +
> +static void bam_channel_exit_one(struct ipa_channel *channel)
> +{
> +	if (channel->dma_chan) {
> +		dmaengine_terminate_sync(channel->dma_chan);
> +		dma_release_channel(channel->dma_chan);
> +	}
> +}
> +
> +/* Get channels from BAM_DMA */
> +int bam_channel_init(struct ipa_dma *bam, u32 count,
> +		const struct ipa_gsi_endpoint_data *data)
> +{
> +	int ret = 0;
> +	u32 i;
> +
> +	for (i = 0; i < count; ++i) {
> +		bool command = i == IPA_ENDPOINT_AP_COMMAND_TX;
> +
> +		if (!data[i].channel_name || data[i].ee_id == GSI_EE_MODEM)
> +			continue;
> +
> +		ret = bam_channel_init_one(bam, &data[i], command);
> +		if (ret)
> +			goto err_unwind;
> +	}
> +
> +	return ret;
> +
> +err_unwind:
> +	while (i--) {
> +		if (ipa_gsi_endpoint_data_empty(&data[i]))
> +			continue;
> +
> +		bam_channel_exit_one(&bam->channel[i]);
> +	}
> +	return ret;
> +}
> +
> +/* Inverse of bam_channel_init() */
> +void bam_channel_exit(struct ipa_dma *bam)
> +{
> +	u32 channel_id = BAM_CHANNEL_COUNT_MAX - 1;
> +
> +	do
> +		bam_channel_exit_one(&bam->channel[channel_id]);
> +	while (channel_id--);
> +}
> +
> +/* Inverse of bam_init() */
> +static void bam_exit(struct ipa_dma *bam)
> +{
> +	mutex_destroy(&bam->mutex);
> +	bam_channel_exit(bam);
> +}
> +
> +/* Return the channel id associated with a given channel */
> +static u32 bam_channel_id(struct ipa_channel *channel)
> +{
> +	return channel - &channel->dma_subsys->channel[0];
> +}
> +
> +static void
> +bam_channel_tx_update(struct ipa_channel *channel, struct ipa_trans *trans)
> +{
> +	u64 byte_count = trans->byte_count + trans->len;
> +	u64 trans_count = trans->trans_count + 1;
> +
> +	byte_count -= channel->compl_byte_count;
> +	channel->compl_byte_count += byte_count;
> +	trans_count -= channel->compl_trans_count;
> +	channel->compl_trans_count += trans_count;
> +
> +	ipa_gsi_channel_tx_completed(channel->dma_subsys, bam_channel_id(channel),
> +					   trans_count, byte_count);
> +}
> +
> +static void
> +bam_channel_rx_update(struct ipa_channel *channel, struct ipa_trans *trans)
> +{
> +	/* FIXME */
> +	u64 byte_count = trans->byte_count + trans->len;
> +
> +	channel->byte_count += byte_count;
> +	channel->trans_count++;
> +}
> +
> +/* Consult hardware, move any newly completed transactions to completed list */
> +static void bam_channel_update(struct ipa_channel *channel)
> +{
> +	struct ipa_trans *trans;
> +
> +	list_for_each_entry(trans, &channel->trans_info.pending, links) {
> +		enum dma_status trans_status =
> +				dma_async_is_tx_complete(channel->dma_chan,
> +					trans->cookie, NULL, NULL);
> +		if (trans_status == DMA_COMPLETE)
> +			break;
> +	}
> +	/* Get the transaction for the latest completed event.  Take a
> +	 * reference to keep it from completing before we give the events
> +	 * for this and previous transactions back to the hardware.
> +	 */
> +	refcount_inc(&trans->refcount);
> +
> +	/* For RX channels, update each completed transaction with the number
> +	 * of bytes that were actually received.  For TX channels, report
> +	 * the number of transactions and bytes this completion represents
> +	 * up the network stack.
> +	 */
> +	if (channel->toward_ipa)
> +		bam_channel_tx_update(channel, trans);
> +	else
> +		bam_channel_rx_update(channel, trans);
> +
> +	ipa_trans_move_complete(trans);
> +
> +	ipa_trans_free(trans);
> +}
> +
> +/**
> + * bam_channel_poll_one() - Return a single completed transaction on a channel
> + * @channel:	Channel to be polled
> + *
> + * Return:	Transaction pointer, or null if none are available
> + *
> + * This function returns the first entry on a channel's completed transaction
> + * list.  If that list is empty, the hardware is consulted to determine
> + * whether any new transactions have completed.  If so, they're moved to the
> + * completed list and the new first entry is returned.  If there are no more
> + * completed transactions, a null pointer is returned.
> + */
> +static struct ipa_trans *bam_channel_poll_one(struct ipa_channel *channel)
> +{
> +	struct ipa_trans *trans;
> +
> +	/* Get the first transaction from the completed list */
> +	trans = ipa_channel_trans_complete(channel);
> +	if (!trans) {
> +		bam_channel_update(channel);
> +		trans = ipa_channel_trans_complete(channel);
> +	}
> +
> +	if (trans)
> +		ipa_trans_move_polled(trans);
> +
> +	return trans;
> +}
> +
> +/**
> + * bam_channel_poll() - NAPI poll function for a channel
> + * @napi:	NAPI structure for the channel
> + * @budget:	Budget supplied by NAPI core
> + *
> + * Return:	Number of items polled (<= budget)
> + *
> + * Single transactions completed by hardware are polled until either
> + * the budget is exhausted, or there are no more.  Each transaction
> + * polled is passed to ipa_trans_complete(), to perform remaining
> + * completion processing and retire/free the transaction.
> + */
> +static int bam_channel_poll(struct napi_struct *napi, int budget)
> +{
> +	struct ipa_channel *channel;
> +	int count = 0;
> +
> +	channel = container_of(napi, struct ipa_channel, napi);
> +	while (count < budget) {
> +		struct ipa_trans *trans;
> +
> +		count++;
> +		trans = bam_channel_poll_one(channel);
> +		if (!trans)
> +			break;
> +		ipa_trans_complete(trans);
> +	}
> +
> +	if (count < budget)
> +		napi_complete(&channel->napi);
> +
> +	return count;
> +}
> +
> +/* Setup function for a single channel */
> +static void bam_channel_setup_one(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	if (!channel->dma_subsys)
> +		return;	/* Ignore uninitialized channels */
> +
> +	if (channel->toward_ipa) {
> +		netif_tx_napi_add(&bam->dummy_dev, &channel->napi,
> +				  bam_channel_poll, NAPI_POLL_WEIGHT);
> +	} else {
> +		netif_napi_add(&bam->dummy_dev, &channel->napi,
> +			       bam_channel_poll, NAPI_POLL_WEIGHT);
> +	}
> +	napi_enable(&channel->napi);
> +}
> +
> +static void bam_channel_teardown_one(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	if (!channel->dma_subsys)
> +		return;		/* Ignore uninitialized channels */
> +
> +	netif_napi_del(&channel->napi);
> +}
> +
> +/* Setup function for channels */
> +static int bam_channel_setup(struct ipa_dma *bam)
> +{
> +	u32 channel_id = 0;
> +	int ret;
> +
> +	mutex_lock(&bam->mutex);
> +
> +	do
> +		bam_channel_setup_one(bam, channel_id);
> +	while (++channel_id < BAM_CHANNEL_COUNT_MAX);
> +
> +	/* Make sure no channels were defined that hardware does not support */
> +	while (channel_id < BAM_CHANNEL_COUNT_MAX) {
> +		struct ipa_channel *channel = &bam->channel[channel_id++];
> +
> +		if (!channel->dma_subsys)
> +			continue;	/* Ignore uninitialized channels */
> +
> +		dev_err(bam->dev, "channel %u not supported by hardware\n",
> +			channel_id - 1);
> +		channel_id = BAM_CHANNEL_COUNT_MAX;
> +		goto err_unwind;
> +	}
> +
> +	mutex_unlock(&bam->mutex);
> +
> +	return 0;
> +
> +err_unwind:
> +	while (channel_id--)
> +		bam_channel_teardown_one(bam, channel_id);
> +
> +	mutex_unlock(&bam->mutex);
> +
> +	return ret;
> +}
> +
> +/* Inverse of bam_channel_setup() */
> +static void bam_channel_teardown(struct ipa_dma *bam)
> +{
> +	u32 channel_id;
> +
> +	mutex_lock(&bam->mutex);
> +
> +	channel_id = BAM_CHANNEL_COUNT_MAX;
> +	do
> +		bam_channel_teardown_one(bam, channel_id);
> +	while (channel_id--);
> +
> +	mutex_unlock(&bam->mutex);
> +}
> +
> +static int bam_setup(struct ipa_dma *bam)
> +{
> +	return bam_channel_setup(bam);
> +}
> +
> +static void bam_teardown(struct ipa_dma *bam)
> +{
> +	bam_channel_teardown(bam);
> +}
> +
> +static u32 bam_channel_tre_max(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	/* Hardware limit is channel->tre_count - 1 */
> +	return channel->tre_count - (channel->tlv_count - 1);
> +}
> +
> +static u32 bam_channel_trans_tre_max(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	return channel->tlv_count;
> +}
> +
> +static int bam_channel_start(struct ipa_dma *bam, u32 channel_id)
> +{
> +	return 0;
> +}
> +
> +static int bam_channel_stop(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	return dmaengine_terminate_sync(channel->dma_chan);
> +}
> +
> +static void bam_channel_reset(struct ipa_dma *bam, u32 channel_id, bool doorbell)
> +{
> +	bam_channel_stop(bam, channel_id);
> +}
> +
> +static int bam_channel_suspend(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	return dmaengine_pause(channel->dma_chan);
> +}
> +
> +static int bam_channel_resume(struct ipa_dma *bam, u32 channel_id)
> +{
> +	struct ipa_channel *channel = &bam->channel[channel_id];
> +
> +	return dmaengine_resume(channel->dma_chan);
> +}
> +
> +static void bam_suspend(struct ipa_dma *bam)
> +{
> +	/* No-op for now */
> +}
> +
> +static void bam_resume(struct ipa_dma *bam)
> +{
> +	/* No-op for now */
> +}
> +
> +static void bam_trans_callback(void *arg)
> +{
> +	ipa_trans_complete(arg);
> +}
> +
> +static void bam_trans_commit(struct ipa_trans *trans, bool unused)
> +{
> +	struct ipa_channel *channel = &trans->dma_subsys->channel[trans->channel_id];
> +	enum ipa_cmd_opcode opcode = IPA_CMD_NONE;
> +	struct ipa_cmd_info *info;
> +	struct scatterlist *sg;
> +	u32 byte_count = 0;
> +	u32 i;
> +	enum dma_transfer_direction direction;
> +
> +	if (channel->toward_ipa)
> +		direction = DMA_MEM_TO_DEV;
> +	else
> +		direction = DMA_DEV_TO_MEM;
> +
> +	/* assert(trans->used > 0); */
> +
> +	info = trans->info ? &trans->info[0] : NULL;
> +	for_each_sg(trans->sgl, sg, trans->used, i) {
> +		bool last_tre = i == trans->used - 1;
> +		dma_addr_t addr = sg_dma_address(sg);
> +		u32 len = sg_dma_len(sg);
> +		u32 dma_flags = 0;
> +		struct dma_async_tx_descriptor *desc;
> +
> +		byte_count += len;
> +		if (info)
> +			opcode = info++->opcode;
> +
> +		if (opcode != IPA_CMD_NONE) {
> +			len = opcode;
> +			dma_flags |= DMA_PREP_IMM_CMD;
> +		}
> +
> +		if (last_tre)
> +			dma_flags |= DMA_PREP_INTERRUPT;
> +
> +		desc = dmaengine_prep_slave_single(channel->dma_chan, addr, len,
> +				direction, dma_flags);
> +
> +		if (last_tre) {
> +			desc->callback = bam_trans_callback;
> +			desc->callback_param = trans;
> +		}
> +
> +		desc->cookie = dmaengine_submit(desc);
> +
> +		if (last_tre)
> +			trans->cookie = desc->cookie;
> +
> +		if (direction == DMA_DEV_TO_MEM)
> +			dmaengine_desc_attach_metadata(desc, &trans->len, sizeof(trans->len));
> +	}
> +
> +	if (channel->toward_ipa) {
> +		/* We record TX bytes when they are sent */
> +		trans->len = byte_count;
> +		trans->trans_count = channel->trans_count;
> +		trans->byte_count = channel->byte_count;
> +		channel->trans_count++;
> +		channel->byte_count += byte_count;
> +	}
> +
> +	ipa_trans_move_pending(trans);
> +
> +	dma_async_issue_pending(channel->dma_chan);
> +}
> +
> +/* Initialize the BAM DMA channels
> + * Actual hw init is handled by the BAM_DMA driver
> + */
> +int bam_init(struct ipa_dma *bam, struct platform_device *pdev,
> +		enum ipa_version version, u32 count,
> +		const struct ipa_gsi_endpoint_data *data)
> +{
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	bam->dev = dev;
> +	bam->version = version;
> +	bam->setup = bam_setup;
> +	bam->teardown = bam_teardown;
> +	bam->exit = bam_exit;
> +	bam->suspend = bam_suspend;
> +	bam->resume = bam_resume;
> +	bam->channel_tre_max = bam_channel_tre_max;
> +	bam->channel_trans_tre_max = bam_channel_trans_tre_max;
> +	bam->channel_start = bam_channel_start;
> +	bam->channel_stop = bam_channel_stop;
> +	bam->channel_reset = bam_channel_reset;
> +	bam->channel_suspend = bam_channel_suspend;
> +	bam->channel_resume = bam_channel_resume;
> +	bam->trans_commit = bam_trans_commit;
> +
> +	init_dummy_netdev(&bam->dummy_dev);
> +
> +	ret = bam_channel_init(bam, count, data);
> +	if (ret)
> +		return ret;
> +
> +	mutex_init(&bam->mutex);
> +
> +	return 0;
> +}
> diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
> index 39d9ca620a9f..ac0b9e748fa1 100644
> --- a/drivers/net/ipa/gsi.c
> +++ b/drivers/net/ipa/gsi.c
> @@ -2210,6 +2210,7 @@ int gsi_init(struct ipa_dma *gsi, struct platform_device *pdev,
>   	gsi->channel_reset = gsi_channel_reset;
>   	gsi->channel_suspend = gsi_channel_suspend;
>   	gsi->channel_resume = gsi_channel_resume;
> +	gsi->trans_commit = gsi_trans_commit;
>   
>   	/* GSI uses NAPI on all channels.  Create a dummy network device
>   	 * for the channel NAPI contexts to be associated with.
> diff --git a/drivers/net/ipa/ipa_data.h b/drivers/net/ipa/ipa_data.h
> index 6d329e9ce5d2..7d62d49f414f 100644
> --- a/drivers/net/ipa/ipa_data.h
> +++ b/drivers/net/ipa/ipa_data.h
> @@ -188,6 +188,7 @@ struct ipa_gsi_endpoint_data {
>   	u8 channel_id;
>   	u8 endpoint_id;
>   	bool toward_ipa;
> +	const char *channel_name;	/* used only for BAM DMA channels */
>   
>   	struct gsi_channel_data channel;
>   	struct ipa_endpoint_data endpoint;
> diff --git a/drivers/net/ipa/ipa_dma.h b/drivers/net/ipa/ipa_dma.h
> index 1a23e6ac5785..3000182ae689 100644
> --- a/drivers/net/ipa/ipa_dma.h
> +++ b/drivers/net/ipa/ipa_dma.h
> @@ -17,7 +17,11 @@
>   
>   /* Maximum number of channels and event rings supported by the driver */
>   #define GSI_CHANNEL_COUNT_MAX	23
> +#define BAM_CHANNEL_COUNT_MAX	20
>   #define GSI_EVT_RING_COUNT_MAX	24
> +#define IPA_CHANNEL_COUNT_MAX	MAX(GSI_CHANNEL_COUNT_MAX, \
> +				    BAM_CHANNEL_COUNT_MAX)
> +#define MAX(a, b)		((a > b) ? a : b)
>   
>   /* Maximum TLV FIFO size for a channel; 64 here is arbitrary (and high) */
>   #define GSI_TLV_MAX		64
> @@ -119,6 +123,8 @@ struct ipa_channel {
>   	struct gsi_ring tre_ring;
>   	u32 evt_ring_id;
>   
> +	struct dma_chan *dma_chan;
> +
>   	u64 byte_count;			/* total # bytes transferred */
>   	u64 trans_count;		/* total # transactions */
>   	/* The following counts are used only for TX endpoints */
> @@ -154,7 +160,7 @@ struct ipa_dma {
>   	u32 irq;
>   	u32 channel_count;
>   	u32 evt_ring_count;
> -	struct ipa_channel channel[GSI_CHANNEL_COUNT_MAX];
> +	struct ipa_channel channel[IPA_CHANNEL_COUNT_MAX];
>   	struct gsi_evt_ring evt_ring[GSI_EVT_RING_COUNT_MAX];
>   	u32 event_bitmap;		/* allocated event rings */
>   	u32 modem_channel_bitmap;	/* modem channels to allocate */
> @@ -303,7 +309,7 @@ static inline void ipa_dma_resume(struct ipa_dma *dma_subsys)
>   }
>   
>   /**
> - * ipa_dma_init() - Initialize the GSI subsystem
> + * ipa_init/bam_init() - Initialize the GSI/BAM subsystem
>    * @dma_subsys:	Address of ipa_dma structure embedded in an IPA structure
>    * @pdev:	IPA platform device
>    * @version:	IPA hardware version (implies GSI version)
> @@ -312,14 +318,18 @@ static inline void ipa_dma_resume(struct ipa_dma *dma_subsys)
>    *
>    * Return:	0 if successful, or a negative error code
>    *
> - * Early stage initialization of the GSI subsystem, performing tasks
> - * that can be done before the GSI hardware is ready to use.
> + * Early stage initialization of the GSI/BAM subsystem, performing tasks
> + * that can be done before the GSI/BAM hardware is ready to use.
>    */
>   
>   int gsi_init(struct ipa_dma *dma_subsys, struct platform_device *pdev,
>   	     enum ipa_version version, u32 count,
>   	     const struct ipa_gsi_endpoint_data *data);
>   
> +int bam_init(struct ipa_dma *dma_subsys, struct platform_device *pdev,
> +	     enum ipa_version version, u32 count,
> +	     const struct ipa_gsi_endpoint_data *data);
> +
>   /**
>    * ipa_dma_exit() - Exit the DMA subsystem
>    * @dma_subsys:	ipa_dma address previously passed to a successful gsi_init() call
> diff --git a/drivers/net/ipa/ipa_dma_private.h b/drivers/net/ipa/ipa_dma_private.h
> index 40148a551b47..1db53e597a61 100644
> --- a/drivers/net/ipa/ipa_dma_private.h
> +++ b/drivers/net/ipa/ipa_dma_private.h
> @@ -16,6 +16,8 @@ struct ipa_channel;
>   
>   #define GSI_RING_ELEMENT_SIZE	16	/* bytes; must be a power of 2 */
>   
> +void gsi_trans_commit(struct ipa_trans *trans, bool ring_db);
> +
>   /* Return the entry that follows one provided in a transaction pool */
>   void *ipa_trans_pool_next(struct ipa_trans_pool *pool, void *element);
>   
> diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
> index ba06e3ad554c..ea6c4347f2c6 100644
> --- a/drivers/net/ipa/ipa_main.c
> +++ b/drivers/net/ipa/ipa_main.c
> @@ -60,12 +60,15 @@
>    * core.  The GSI implements a set of "channels" used for communication
>    * between the AP and the IPA.
>    *
> - * The IPA layer uses GSI channels to implement its "endpoints".  And while
> - * a GSI channel carries data between the AP and the IPA, a pair of IPA
> - * endpoints is used to carry traffic between two EEs.  Specifically, the main
> - * modem network interface is implemented by two pairs of endpoints:  a TX
> + * The IPA layer uses GSI channels or BAM pipes to implement its "endpoints".
> + * And while a GSI channel carries data between the AP and the IPA, a pair of
> + * IPA endpoints is used to carry traffic between two EEs.  Specifically, the
> + * main modem network interface is implemented by two pairs of endpoints:  a TX
>    * endpoint on the AP coupled with an RX endpoint on the modem; and another
>    * RX endpoint on the AP receiving data from a TX endpoint on the modem.
> + *
> + * For BAM based transport, a pair of BAM pipes are used for TX and RX between
> + * the AP and IPA, and between IPA and other EEs.
>    */
>   
>   /* The name of the GSI firmware file relative to /lib/firmware */
> @@ -716,8 +719,13 @@ static int ipa_probe(struct platform_device *pdev)
>   	if (ret)
>   		goto err_reg_exit;
>   
> -	ret = gsi_init(&ipa->dma_subsys, pdev, ipa->version, data->endpoint_count,
> -		       data->endpoint_data);
> +	if (IPA_HAS_GSI(ipa->version))
> +		ret = gsi_init(&ipa->dma_subsys, pdev, ipa->version, data->endpoint_count,
> +			       data->endpoint_data);
> +	else
> +		ret = bam_init(&ipa->dma_subsys, pdev, ipa->version, data->endpoint_count,
> +			       data->endpoint_data);
> +
>   	if (ret)
>   		goto err_mem_exit;
>   
> diff --git a/drivers/net/ipa/ipa_trans.c b/drivers/net/ipa/ipa_trans.c
> index 22755f3ce3da..444f44846da8 100644
> --- a/drivers/net/ipa/ipa_trans.c
> +++ b/drivers/net/ipa/ipa_trans.c
> @@ -254,7 +254,7 @@ struct ipa_trans *ipa_channel_trans_complete(struct ipa_channel *channel)
>   }
>   
>   /* Move a transaction from the allocated list to the pending list */
> -static void ipa_trans_move_pending(struct ipa_trans *trans)
> +void ipa_trans_move_pending(struct ipa_trans *trans)
>   {
>   	struct ipa_channel *channel = &trans->dma_subsys->channel[trans->channel_id];
>   	struct ipa_trans_info *trans_info = &channel->trans_info;
> @@ -539,7 +539,7 @@ static void gsi_trans_tre_fill(struct gsi_tre *dest_tre, dma_addr_t addr,
>    * pending list.  Finally, updates the channel ring pointer and optionally
>    * rings the doorbell.
>    */
> -static void __gsi_trans_commit(struct ipa_trans *trans, bool ring_db)
> +void gsi_trans_commit(struct ipa_trans *trans, bool ring_db)
>   {
>   	struct ipa_channel *channel = &trans->dma_subsys->channel[trans->channel_id];
>   	struct gsi_ring *ring = &channel->tre_ring;
> @@ -604,9 +604,9 @@ static void __gsi_trans_commit(struct ipa_trans *trans, bool ring_db)
>   /* Commit a GSI transaction */
>   void ipa_trans_commit(struct ipa_trans *trans, bool ring_db)
>   {
> -	if (trans->used)
> -		__gsi_trans_commit(trans, ring_db);
> -	else
> +	if (trans->used) {
> +		trans->dma_subsys->trans_commit(trans, ring_db);
> +	} else
>   		ipa_trans_free(trans);
>   }
>   
> @@ -618,7 +618,7 @@ void ipa_trans_commit_wait(struct ipa_trans *trans)
>   
>   	refcount_inc(&trans->refcount);
>   
> -	__gsi_trans_commit(trans, true);
> +	trans->dma_subsys->trans_commit(trans, true);
>   
>   	wait_for_completion(&trans->completion);
>   
> @@ -638,7 +638,7 @@ int ipa_trans_commit_wait_timeout(struct ipa_trans *trans,
>   
>   	refcount_inc(&trans->refcount);
>   
> -	__gsi_trans_commit(trans, true);
> +	trans->dma_subsys->trans_commit(trans, true);
>   
>   	remaining = wait_for_completion_timeout(&trans->completion,
>   						timeout_jiffies);
> diff --git a/drivers/net/ipa/ipa_trans.h b/drivers/net/ipa/ipa_trans.h
> index b93342414360..5f41e3e6f92a 100644
> --- a/drivers/net/ipa/ipa_trans.h
> +++ b/drivers/net/ipa/ipa_trans.h
> @@ -10,6 +10,7 @@
>   #include <linux/refcount.h>
>   #include <linux/completion.h>
>   #include <linux/dma-direction.h>
> +#include <linux/dmaengine.h>
>   
>   #include "ipa_cmd.h"
>   
> @@ -61,6 +62,7 @@ struct ipa_trans {
>   	struct scatterlist *sgl;
>   	struct ipa_cmd_info *info;	/* array of entries, or null */
>   	enum dma_data_direction direction;
> +	dma_cookie_t cookie;
>   
>   	refcount_t refcount;
>   	struct completion completion;
> @@ -149,6 +151,8 @@ struct ipa_trans *ipa_channel_trans_alloc(struct ipa_dma *dma_subsys, u32 channe
>    */
>   void ipa_trans_free(struct ipa_trans *trans);
>   
> +void ipa_trans_move_pending(struct ipa_trans *trans);
> +
>   /**
>    * ipa_trans_cmd_add() - Add an immediate command to a transaction
>    * @trans:	Transaction
> 

Powered by blists - more mailing lists