| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211013223921.4380-7-ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:11 +0200
From: Ansuel Smith <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Russell King <linux@...linux.org.uk>,
John Crispin <john@...ozen.org>,
Ansuel Smith <ansuelsmth@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: [net-next PATCH v7 06/16] net: dsa: qca8k: rework rgmii delay logic and scan for cpu port 6
Future proof commit. This switch have 2 CPU ports and one valid
configuration is first CPU port set to sgmii and second CPU port set to
rgmii-id. The current implementation detects delay only for CPU port
zero set to rgmii and doesn't count any delay set in a secondary CPU
port. Drop the current delay scan function and move it to the sgmii
parser function to generalize and implicitly add support for secondary
CPU port set to rgmii-id. Introduce new logic where delay is enabled
also with internal delay binding declared and rgmii set as PHY mode.
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
drivers/net/dsa/qca8k.c | 165 ++++++++++++++++++++--------------------
drivers/net/dsa/qca8k.h | 10 ++-
2 files changed, 89 insertions(+), 86 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index bbe3fe9cfaa8..dad8cc5fd1af 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -888,68 +888,6 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
return 0;
}
-static int
-qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
-{
- struct device_node *port_dn;
- phy_interface_t mode;
- struct dsa_port *dp;
- u32 val;
-
- /* CPU port is already checked */
- dp = dsa_to_port(priv->ds, 0);
-
- port_dn = dp->dn;
-
- /* Check if port 0 is set to the correct type */
- of_get_phy_mode(port_dn, &mode);
- if (mode != PHY_INTERFACE_MODE_RGMII_ID &&
- mode != PHY_INTERFACE_MODE_RGMII_RXID &&
- mode != PHY_INTERFACE_MODE_RGMII_TXID) {
- return 0;
- }
-
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val))
- val = 2;
- else
- /* Switch regs accept value in ns, convert ps to ns */
- val = val / 1000;
-
- if (val > QCA8K_MAX_DELAY) {
- dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
- val = 3;
- }
-
- priv->rgmii_rx_delay = val;
- /* Stop here if we need to check only for rx delay */
- if (mode != PHY_INTERFACE_MODE_RGMII_ID)
- break;
-
- fallthrough;
- case PHY_INTERFACE_MODE_RGMII_TXID:
- if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val))
- val = 1;
- else
- /* Switch regs accept value in ns, convert ps to ns */
- val = val / 1000;
-
- if (val > QCA8K_MAX_DELAY) {
- dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
- val = 3;
- }
-
- priv->rgmii_tx_delay = val;
- break;
- default:
- return 0;
- }
-
- return 0;
-}
-
static int
qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
{
@@ -996,19 +934,21 @@ static int qca8k_find_cpu_port(struct dsa_switch *ds)
static int
qca8k_parse_port_config(struct qca8k_priv *priv)
{
+ int port, cpu_port_index = 0, ret;
struct device_node *port_dn;
phy_interface_t mode;
struct dsa_port *dp;
- int port, ret;
+ u32 delay;
/* We have 2 CPU port. Check them */
- for (port = 0; port < QCA8K_NUM_PORTS; port++) {
+ for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
/* Skip every other port */
if (port != 0 && port != 6)
continue;
dp = dsa_to_port(priv->ds, port);
port_dn = dp->dn;
+ cpu_port_index++;
if (!of_device_is_available(port_dn))
continue;
@@ -1017,12 +957,54 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
if (ret)
continue;
- if (mode == PHY_INTERFACE_MODE_SGMII) {
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID)
+ delay = 1;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->rgmii_tx_delay[cpu_port_index] = delay;
+
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ delay = 2;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->rgmii_rx_delay[cpu_port_index] = delay;
+
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
priv->sgmii_tx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
priv->sgmii_rx_clk_falling_edge = true;
+
+ break;
+ default:
+ continue;
}
}
@@ -1059,10 +1041,6 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
- ret = qca8k_setup_of_rgmii_delay(priv);
- if (ret)
- return ret;
-
ret = qca8k_setup_mac_pwr_sel(priv);
if (ret)
return ret;
@@ -1229,8 +1207,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
- u32 reg, val;
- int ret;
+ int cpu_port_index, ret;
+ u32 reg, val, delay;
switch (port) {
case 0: /* 1st CPU port */
@@ -1242,6 +1220,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
return;
reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
break;
case 1:
case 2:
@@ -1260,6 +1239,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
return;
reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
break;
default:
dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
@@ -1274,23 +1254,40 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
switch (state->interface) {
case PHY_INTERFACE_MODE_RGMII:
- /* RGMII mode means no delay so don't enable the delay */
- qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
- break;
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
- /* RGMII_ID needs internal delay. This is enabled through
- * PORT5_PAD_CTRL for all ports, rather than individual port
- * registers
+ val = QCA8K_PORT_PAD_RGMII_EN;
+
+ /* Delay can be declared in 3 different way.
+ * Mode to rgmii and internal-delay standard binding defined
+ * rgmii-id or rgmii-tx/rx phy mode set.
+ * The parse logic set a delay different than 0 only when one
+ * of the 3 different way is used. In all other case delay is
+ * not enabled. With ID or TX/RXID delay is enabled and set
+ * to the default and recommended value.
+ */
+ if (priv->rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->rgmii_tx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ }
+
+ if (priv->rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->rgmii_rx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ }
+
+ /* Set RGMII delay based on the selected values */
+ qca8k_write(priv, reg, val);
+
+ /* QCA8337 requires to set rgmii rx delay for all ports.
+ * This is enabled through PORT5_PAD_CTRL for all ports,
+ * rather than individual port registers.
*/
- qca8k_write(priv, reg,
- QCA8K_PORT_PAD_RGMII_EN |
- QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) |
- QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) |
- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
- /* QCA8337 requires to set rgmii rx delay */
if (priv->switch_id == QCA8K_ID_QCA8337)
qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 781521e6a965..5eb0c890dfe4 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -13,6 +13,7 @@
#include <linux/gpio.h>
#define QCA8K_NUM_PORTS 7
+#define QCA8K_NUM_CPU_PORTS 2
#define QCA8K_MAX_MTU 9000
#define PHY_ID_QCA8327 0x004dd034
@@ -255,13 +256,18 @@ struct qca8k_match_data {
u8 id;
};
+enum {
+ QCA8K_CPU_PORT0,
+ QCA8K_CPU_PORT6,
+};
+
struct qca8k_priv {
u8 switch_id;
u8 switch_revision;
- u8 rgmii_tx_delay;
- u8 rgmii_rx_delay;
bool sgmii_rx_clk_falling_edge;
bool sgmii_tx_clk_falling_edge;
+ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
bool legacy_phy_port_mapping;
struct regmap *regmap;
struct mii_bus *bus;
--
2.32.0
Powered by blists - more mailing lists