Message-ID: <20211014164509.GB2847733@p14s>
Date:   Thu, 14 Oct 2021 10:45:09 -0600
From:   Mathieu Poirier <mathieu.poirier@...aro.org>
To:     Arnaud POULIQUEN <arnaud.pouliquen@...s.st.com>
Cc:     Ohad Ben-Cohen <ohad@...ery.com>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Jonathan Corbet <corbet@....net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>, Suman Anna <s-anna@...com>,
        linux-stm32@...md-mailman.stormreply.com,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-remoteproc@...r.kernel.org
Subject: Re: [PATCH v9 2/2] tty: add rpmsg driver

Good morning,

On Thu, Oct 14, 2021 at 09:45:07AM +0200, Arnaud POULIQUEN wrote:
> Hello Mathieu,
> 
> On 10/12/21 8:07 PM, Mathieu Poirier wrote:
> > On Fri, Oct 08, 2021 at 05:34:46PM +0200, Arnaud Pouliquen wrote:
> >> This driver exposes a standard TTY interface on top of the rpmsg
> >> framework through a rpmsg service.
> >>
> >> This driver supports multi-instances, offering a /dev/ttyRPMSGx entry
> >> per rpmsg endpoint.
> >>
> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>
> >>
> >> ---
> >> Update from V8
> >> => Update based on Greg Greg Kroah-Hartman comments:
> >>  - add module name in kconfig
> >>  - remove the tty_rpmsg.rst documentation file and add description in
> >>    rpmsg_tty.c.
> >>  - rpmsg_tty.c remove of useless check and logs.
> >>  - print err log instead of debug log on truncated RX buffer.
> >> ---
> >>  drivers/tty/Kconfig     |  12 ++
> >>  drivers/tty/Makefile    |   1 +
> >>  drivers/tty/rpmsg_tty.c | 275 ++++++++++++++++++++++++++++++++++++++++
> >>  3 files changed, 288 insertions(+)
> >>  create mode 100644 drivers/tty/rpmsg_tty.c
> >>
> >> diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
> >> index 23cc988c68a4..cc30ff93e2e4 100644
> >> --- a/drivers/tty/Kconfig
> >> +++ b/drivers/tty/Kconfig
> >> @@ -368,6 +368,18 @@ config VCC
> >>  
> >>  source "drivers/tty/hvc/Kconfig"
> >>  
> >> +config RPMSG_TTY
> >> +	tristate "RPMSG tty driver"
> >> +	depends on RPMSG
> >> +	help
> >> +	  Say y here to export rpmsg endpoints as tty devices, usually found
> >> +	  in /dev/ttyRPMSGx.
> >> +	  This makes it possible for user-space programs to send and receive
> >> +	  rpmsg messages as a standard tty protocol.
> >> +
> >> +	  To compile this driver as a module, choose M here: the module will be
> >> +	  called rpmsg_tty.
> >> +
> >>  endif # TTY
> >>  
> >>  source "drivers/tty/serdev/Kconfig"
> >> diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
> >> index a2bd75fbaaa4..07aca5184a55 100644
> >> --- a/drivers/tty/Makefile
> >> +++ b/drivers/tty/Makefile
> >> @@ -26,5 +26,6 @@ obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
> >>  obj-$(CONFIG_GOLDFISH_TTY)	+= goldfish.o
> >>  obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o
> >>  obj-$(CONFIG_VCC)		+= vcc.o
> >> +obj-$(CONFIG_RPMSG_TTY)		+= rpmsg_tty.o
> >>  
> >>  obj-y += ipwireless/
> >> diff --git a/drivers/tty/rpmsg_tty.c b/drivers/tty/rpmsg_tty.c
> >> new file mode 100644
> >> index 000000000000..226a13f6ef94
> >> --- /dev/null
> >> +++ b/drivers/tty/rpmsg_tty.c
> >> @@ -0,0 +1,275 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (C) 2021 STMicroelectronics - All Rights Reserved
> >> + *
> >> + * The rpmsg tty driver implements serial communication on the RPMsg bus to makes
> >> + * possible for user-space programs to send and receive rpmsg messages as a standard
> >> + * tty protocol.
> >> + *
> >> + * The remote processor can instantiate a new tty by requesting a "rpmsg-tty" RPMsg service.
> >> + * The "rpmsg-tty" service is directly used for data exchange. No flow control is implemented yet.
> >> + */
> >> +
> >> +#include <linux/module.h>
> >> +#include <linux/rpmsg.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/tty.h>
> >> +#include <linux/tty_flip.h>
> >> +
> >> +#define MAX_TTY_RPMSG	32
> >> +
> >> +static DEFINE_IDR(tty_idr);	/* tty instance id */
> >> +static DEFINE_MUTEX(idr_lock);	/* protects tty_idr */
> >> +
> >> +static struct tty_driver *rpmsg_tty_driver;
> >> +
> >> +struct rpmsg_tty_port {
> >> +	struct tty_port		port;	 /* TTY port data */
> >> +	int			id;	 /* TTY rpmsg index */
> >> +	struct rpmsg_device	*rpdev;	 /* rpmsg device */
> >> +};
> >> +
> >> +static int rpmsg_tty_cb(struct rpmsg_device *rpdev, void *data, int len, void *priv, u32 src)
> >> +{
> >> +	struct rpmsg_tty_port *cport = dev_get_drvdata(&rpdev->dev);
> >> +	int copied;
> >> +
> >> +	if (!len)
> >> +		return -EINVAL;
> >> +	copied = tty_insert_flip_string(&cport->port, data, len);
> >> +	if (copied != len)
> >> +		dev_err(&rpdev->dev, "Trunc buffer: available space is %d\n",
> >> +			copied);
> 
> Here as the rpmsg callback return is not tested we need to log something because
> data is lost. I will add the ratelimited version to limit logs.
> 
> >> +	tty_flip_buffer_push(&cport->port);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rpmsg_tty_install(struct tty_driver *driver, struct tty_struct *tty)
> >> +{
> >> +	struct rpmsg_tty_port *cport = idr_find(&tty_idr, tty->index);
> >> +
> >> +	tty->driver_data = cport;
> >> +
> >> +	return tty_port_install(&cport->port, driver, tty);
> >> +}
> >> +
> >> +static int rpmsg_tty_open(struct tty_struct *tty, struct file *filp)
> >> +{
> >> +	return tty_port_open(tty->port, tty, filp);
> >> +}
> >> +
> >> +static void rpmsg_tty_close(struct tty_struct *tty, struct file *filp)
> >> +{
> >> +	return tty_port_close(tty->port, tty, filp);
> >> +}
> >> +
> >> +static int rpmsg_tty_write(struct tty_struct *tty, const u8 *buf, int len)
> >> +{
> >> +	struct rpmsg_tty_port *cport = tty->driver_data;
> >> +	struct rpmsg_device *rpdev;
> >> +	int msg_max_size, msg_size;
> >> +	int ret;
> >> +
> >> +	rpdev = cport->rpdev;
> >> +
> >> +	msg_max_size = rpmsg_get_mtu(rpdev->ept);
> >> +	if (msg_max_size < 0)
> >> +		return msg_max_size;
> >> +
> >> +	msg_size = min(len, msg_max_size);
> >> +
> >> +	/*
> >> +	 * Use rpmsg_trysend instead of rpmsg_send to send the message so the caller is not
> >> +	 * hung until a rpmsg buffer is available. In such case rpmsg_trysend returns -ENOMEM.
> >> +	 */
> >> +	ret = rpmsg_trysend(rpdev->ept, (void *)buf, msg_size);
> >> +	if (ret) {
> >> +		dev_dbg(&rpdev->dev, "rpmsg_send failed: %d\n", ret);
> > 
> > I'm with Greg on this one.  Event if it's a dev_dbg() something like this could
> > quickly fill the logs. 
> That's right,if the remote side is stalled and application doesn't propertly
> handle the error returned.
> 
> > Customers should learn to use ftrace.  At the very least
> > please use the ratelimited() version.  Same comment applies to rpmsg_tty_cb().
> 
> I'm not yet an expert in ftrace, I don't see trace that would highligth this
> error (return value not traced), except adding trace_printk. If you have a
> solution, please could you point that out to me?
> The goal here is that a customers (who has an user spece application develloper
> profile) has the explicit information that something goes wrong.

Typically trance_printk() are removed after debugging and spinning off your own
events file under include/trace/events/ seems overkill to me.  

> 
> By default I would be in favour of using ratelimited version also here.

Yes, ratelimited should do just fine. 

> 
> > 
> > Otherwise:
> > 
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@...aro.org>
> > 
> 
> Thanks,
> Arnaud
> 
> >> +		return ret;
> >> +	}
> >> +
> >> +	return msg_size;
> >> +}
> >> +
> >> +static unsigned int rpmsg_tty_write_room(struct tty_struct *tty)
> >> +{
> >> +	struct rpmsg_tty_port *cport = tty->driver_data;
> >> +	int size;
> >> +
> >> +	size = rpmsg_get_mtu(cport->rpdev->ept);
> >> +	if (size < 0)
> >> +		return 0;
> >> +
> >> +	return size;
> >> +}
> >> +
> >> +static const struct tty_operations rpmsg_tty_ops = {
> >> +	.install	= rpmsg_tty_install,
> >> +	.open		= rpmsg_tty_open,
> >> +	.close		= rpmsg_tty_close,
> >> +	.write		= rpmsg_tty_write,
> >> +	.write_room	= rpmsg_tty_write_room,
> >> +};
> >> +
> >> +static struct rpmsg_tty_port *rpmsg_tty_alloc_cport(void)
> >> +{
> >> +	struct rpmsg_tty_port *cport;
> >> +	int err;
> >> +
> >> +	cport = kzalloc(sizeof(*cport), GFP_KERNEL);
> >> +	if (!cport)
> >> +		return ERR_PTR(-ENOMEM);
> >> +
> >> +	mutex_lock(&idr_lock);
> >> +	cport->id = idr_alloc(&tty_idr, cport, 0, MAX_TTY_RPMSG, GFP_KERNEL);
> >> +	mutex_unlock(&idr_lock);
> >> +
> >> +	if (cport->id < 0) {
> >> +		err = cport->id;
> >> +		kfree(cport);
> >> +		return ERR_PTR(err);
> >> +	}
> >> +
> >> +	return cport;
> >> +}
> >> +
> >> +static void rpmsg_tty_release_cport(struct rpmsg_tty_port *cport)
> >> +{
> >> +	mutex_lock(&idr_lock);
> >> +	idr_remove(&tty_idr, cport->id);
> >> +	mutex_unlock(&idr_lock);
> >> +
> >> +	kfree(cport);
> >> +}
> >> +
> >> +static const struct tty_port_operations rpmsg_tty_port_ops = { };
> >> +
> >> +static int rpmsg_tty_probe(struct rpmsg_device *rpdev)
> >> +{
> >> +	struct rpmsg_tty_port *cport;
> >> +	struct device *dev = &rpdev->dev;
> >> +	struct device *tty_dev;
> >> +	int ret;
> >> +
> >> +	cport = rpmsg_tty_alloc_cport();
> >> +	if (IS_ERR(cport)) {
> >> +		dev_err(dev, "Failed to alloc tty port\n");
> >> +		return PTR_ERR(cport);
> >> +	}
> >> +
> >> +	tty_port_init(&cport->port);
> >> +	cport->port.ops = &rpmsg_tty_port_ops;
> >> +
> >> +	tty_dev = tty_port_register_device(&cport->port, rpmsg_tty_driver,
> >> +					   cport->id, dev);
> >> +	if (IS_ERR(tty_dev)) {
> >> +		dev_err(dev, "Failed to register tty port\n");
> >> +		ret = PTR_ERR(tty_dev);
> >> +		goto  err_destroy;
> >> +	}
> >> +
> >> +	cport->rpdev = rpdev;
> >> +
> >> +	dev_set_drvdata(dev, cport);
> >> +
> >> +	dev_dbg(dev, "New channel: 0x%x -> 0x%x : ttyRPMSG%d\n",
> >> +		rpdev->src, rpdev->dst, cport->id);
> >> +
> >> +	return 0;
> >> +
> >> +err_destroy:
> >> +	tty_port_destroy(&cport->port);
> >> +	rpmsg_tty_release_cport(cport);
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static void rpmsg_tty_remove(struct rpmsg_device *rpdev)
> >> +{
> >> +	struct rpmsg_tty_port *cport = dev_get_drvdata(&rpdev->dev);
> >> +
> >> +	dev_dbg(&rpdev->dev, "Removing rpmsg tty device %d\n", cport->id);
> >> +
> >> +	/* User hang up to release the tty */
> >> +	if (tty_port_initialized(&cport->port))
> >> +		tty_port_tty_hangup(&cport->port, false);
> >> +
> >> +	tty_unregister_device(rpmsg_tty_driver, cport->id);
> >> +
> >> +	tty_port_destroy(&cport->port);
> >> +	rpmsg_tty_release_cport(cport);
> >> +}
> >> +
> >> +static struct rpmsg_device_id rpmsg_driver_tty_id_table[] = {
> >> +	{ .name	= "rpmsg-tty" },
> >> +	{ },
> >> +};
> >> +MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_tty_id_table);
> >> +
> >> +static struct rpmsg_driver rpmsg_tty_rpmsg_drv = {
> >> +	.drv.name	= KBUILD_MODNAME,
> >> +	.id_table	= rpmsg_driver_tty_id_table,
> >> +	.probe		= rpmsg_tty_probe,
> >> +	.callback	= rpmsg_tty_cb,
> >> +	.remove		= rpmsg_tty_remove,
> >> +};
> >> +
> >> +static int __init rpmsg_tty_init(void)
> >> +{
> >> +	int err;
> >> +
> >> +	rpmsg_tty_driver = tty_alloc_driver(MAX_TTY_RPMSG, TTY_DRIVER_REAL_RAW |
> >> +					    TTY_DRIVER_DYNAMIC_DEV);
> >> +	if (IS_ERR(rpmsg_tty_driver))
> >> +		return PTR_ERR(rpmsg_tty_driver);
> >> +
> >> +	rpmsg_tty_driver->driver_name = "rpmsg_tty";
> >> +	rpmsg_tty_driver->name = "ttyRPMSG";
> >> +	rpmsg_tty_driver->major = 0;
> >> +	rpmsg_tty_driver->type = TTY_DRIVER_TYPE_CONSOLE;
> >> +
> >> +	/* Disable unused mode by default */
> >> +	rpmsg_tty_driver->init_termios = tty_std_termios;
> >> +	rpmsg_tty_driver->init_termios.c_lflag &= ~(ECHO | ICANON);
> >> +	rpmsg_tty_driver->init_termios.c_oflag &= ~(OPOST | ONLCR);
> >> +
> >> +	tty_set_operations(rpmsg_tty_driver, &rpmsg_tty_ops);
> >> +
> >> +	err = tty_register_driver(rpmsg_tty_driver);
> >> +	if (err < 0) {
> >> +		pr_err("Couldn't install rpmsg tty driver: err %d\n", err);
> >> +		goto error_put;
> >> +	}
> >> +
> >> +	err = register_rpmsg_driver(&rpmsg_tty_rpmsg_drv);
> >> +	if (err < 0) {
> >> +		pr_err("Couldn't register rpmsg tty driver: err %d\n", err);
> >> +		goto error_unregister;
> >> +	}
> >> +
> >> +	return 0;
> >> +
> >> +error_unregister:
> >> +	tty_unregister_driver(rpmsg_tty_driver);
> >> +
> >> +error_put:
> >> +	tty_driver_kref_put(rpmsg_tty_driver);
> >> +
> >> +	return err;
> >> +}
> >> +
> >> +static void __exit rpmsg_tty_exit(void)
> >> +{
> >> +	unregister_rpmsg_driver(&rpmsg_tty_rpmsg_drv);
> >> +	tty_unregister_driver(rpmsg_tty_driver);
> >> +	tty_driver_kref_put(rpmsg_tty_driver);
> >> +	idr_destroy(&tty_idr);
> >> +}
> >> +
> >> +module_init(rpmsg_tty_init);
> >> +module_exit(rpmsg_tty_exit);
> >> +
> >> +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>");
> >> +MODULE_DESCRIPTION("remote processor messaging tty driver");
> >> +MODULE_LICENSE("GPL v2");
> >> -- 
> >> 2.17.1
> >>

Powered by blists - more mailing lists