lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 15 Oct 2021 19:19:47 +0200
From:   Andrzej Pietrasiewicz <andrzej.p@...labora.com>
To:     Jernej Škrabec <jernej.skrabec@...il.com>,
        linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
        linux-staging@...ts.linux.dev
Cc:     Benjamin Gaignard <benjamin.gaignard@...labora.com>,
        Boris Brezillon <boris.brezillon@...labora.com>,
        Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
        Fabio Estevam <festevam@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Heiko Stuebner <heiko@...ech.de>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Nicolas Dufresne <nicolas.dufresne@...labora.com>,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>, kernel@...labora.com,
        Ezequiel Garcia <ezequiel@...labora.com>
Subject: Re: [PATCH v7 11/11] media: hantro: Support NV12 on the G2 core

Hi Jernej,

W dniu 14.10.2021 o 19:42, Jernej Škrabec pisze:
> Hi Andrzej!
> 
> Dne sreda, 29. september 2021 ob 18:04:39 CEST je Andrzej Pietrasiewicz
> napisal(a):
>> The G2 decoder block produces NV12 4x4 tiled format (NV12_4L4).
>> Enable the G2 post-processor block, in order to produce regular NV12.
>>
>> The logic in hantro_postproc.c is leveraged to take care of allocating
>> the extra buffers and configure the post-processor, which is
>> significantly simpler than the one on the G1.
> 
> Quick summary of discussion on LibreELEC Slack:
> When using NV12 format on Allwinner H6 variant of G2 (needs some driver
> changes), I get frames out of order. If I use native NV12 tiled format, frames
> are ordered correctly.
> 
> Currently I'm not sure if this is issue with my changes or is this general
> issue.
> 
> I would be grateful if anyone can test frame order with and without
> postprocessing enabled on imx8. Take some dynamic video with a lot of short
> scenes. It's pretty obvious when frames are out of order.
> 

I checked on imx8 and cannot observe any such artifacts.

Andrzej

> However, given that frames themself are correctly decoded and without
> postprocessing in right order, that shouldn't block merging previous patches.
> I tried few different videos and frames were all decoded correctly.
> 
> Best regards,
> Jernej
> 
>>
>> Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
>> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
>> ---
>>   .../staging/media/hantro/hantro_g2_vp9_dec.c  |  6 ++--
>>   drivers/staging/media/hantro/hantro_hw.h      |  1 +
>>   .../staging/media/hantro/hantro_postproc.c    | 31 +++++++++++++++++++
>>   drivers/staging/media/hantro/imx8m_vpu_hw.c   | 11 +++++++
>>   4 files changed, 46 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c b/drivers/
> staging/media/hantro/hantro_g2_vp9_dec.c
>> index 7f827b9f0133..1a26be72c878 100644
>> --- a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
>> +++ b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
>> @@ -152,7 +152,7 @@ static void config_output(struct hantro_ctx *ctx,
>>   	hantro_reg_write(ctx->dev, &g2_out_dis, 0);
>>   	hantro_reg_write(ctx->dev, &g2_output_format, 0);
>>   
>> -	luma_addr = vb2_dma_contig_plane_dma_addr(&dst->base.vb.vb2_buf,
> 0);
>> +	luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
>>   	hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
>>   
>>   	chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
>> @@ -191,7 +191,7 @@ static void config_ref(struct hantro_ctx *ctx,
>>   	hantro_reg_write(ctx->dev, &ref_reg->hor_scale, (refw << 14) /
> dst->vp9.width);
>>   	hantro_reg_write(ctx->dev, &ref_reg->ver_scale, (refh << 14) /
> dst->vp9.height);
>>   
>> -	luma_addr = vb2_dma_contig_plane_dma_addr(&buf->base.vb.vb2_buf,
> 0);
>> +	luma_addr = hantro_get_dec_buf_addr(ctx, &buf->base.vb.vb2_buf);
>>   	hantro_write_addr(ctx->dev, ref_reg->y_base, luma_addr);
>>   
>>   	chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
>> @@ -236,7 +236,7 @@ static void config_ref_registers(struct hantro_ctx *ctx,
>>   	config_ref(ctx, dst, &ref_regs[1], dec_params, dec_params-
>> golden_frame_ts);
>>   	config_ref(ctx, dst, &ref_regs[2], dec_params, dec_params-
>> alt_frame_ts);
>>   
>> -	mv_addr = vb2_dma_contig_plane_dma_addr(&mv_ref->base.vb.vb2_buf,
> 0) +
>> +	mv_addr = hantro_get_dec_buf_addr(ctx, &mv_ref->base.vb.vb2_buf) +
>>   		  mv_offset(ctx, dec_params);
>>   	hantro_write_addr(ctx->dev, G2_REF_MV_ADDR(0), mv_addr);
>>   
>> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/
> media/hantro/hantro_hw.h
>> index 2961d399fd60..3d4a5dc1e6d5 100644
>> --- a/drivers/staging/media/hantro/hantro_hw.h
>> +++ b/drivers/staging/media/hantro/hantro_hw.h
>> @@ -274,6 +274,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
>>   extern const struct hantro_variant sama5d4_vdec_variant;
>>   
>>   extern const struct hantro_postproc_ops hantro_g1_postproc_ops;
>> +extern const struct hantro_postproc_ops hantro_g2_postproc_ops;
>>   
>>   extern const u32 hantro_vp8_dec_mc_filter[8][6];
>>   
>> diff --git a/drivers/staging/media/hantro/hantro_postproc.c b/drivers/
> staging/media/hantro/hantro_postproc.c
>> index 4549aec08feb..79a66d001738 100644
>> --- a/drivers/staging/media/hantro/hantro_postproc.c
>> +++ b/drivers/staging/media/hantro/hantro_postproc.c
>> @@ -11,6 +11,7 @@
>>   #include "hantro.h"
>>   #include "hantro_hw.h"
>>   #include "hantro_g1_regs.h"
>> +#include "hantro_g2_regs.h"
>>   
>>   #define HANTRO_PP_REG_WRITE(vpu, reg_name, val) \
>>   { \
>> @@ -99,6 +100,21 @@ static void hantro_postproc_g1_enable(struct hantro_ctx
> *ctx)
>>   	HANTRO_PP_REG_WRITE(vpu, display_width, ctx->dst_fmt.width);
>>   }
>>   
>> +static void hantro_postproc_g2_enable(struct hantro_ctx *ctx)
>> +{
>> +	struct hantro_dev *vpu = ctx->dev;
>> +	struct vb2_v4l2_buffer *dst_buf;
>> +	size_t chroma_offset = ctx->dst_fmt.width * ctx->dst_fmt.height;
>> +	dma_addr_t dst_dma;
>> +
>> +	dst_buf = hantro_get_dst_buf(ctx);
>> +	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
>> +
>> +	hantro_write_addr(vpu, G2_RS_OUT_LUMA_ADDR, dst_dma);
>> +	hantro_write_addr(vpu, G2_RS_OUT_CHROMA_ADDR, dst_dma +
> chroma_offset);
>> +	hantro_reg_write(vpu, &g2_out_rs_e, 1);
>> +}
>> +
>>   void hantro_postproc_free(struct hantro_ctx *ctx)
>>   {
>>   	struct hantro_dev *vpu = ctx->dev;
>> @@ -127,6 +143,9 @@ int hantro_postproc_alloc(struct hantro_ctx *ctx)
>>   	if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
>>   		buf_size += hantro_h264_mv_size(ctx->dst_fmt.width,
>>   						ctx-
>> dst_fmt.height);
>> +	else if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_VP9_FRAME)
>> +		buf_size += hantro_vp9_mv_size(ctx->dst_fmt.width,
>> +					       ctx-
>> dst_fmt.height);
>>   
>>   	for (i = 0; i < num_buffers; ++i) {
>>   		struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
>> @@ -152,6 +171,13 @@ static void hantro_postproc_g1_disable(struct
> hantro_ctx *ctx)
>>   	HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x0);
>>   }
>>   
>> +static void hantro_postproc_g2_disable(struct hantro_ctx *ctx)
>> +{
>> +	struct hantro_dev *vpu = ctx->dev;
>> +
>> +	hantro_reg_write(vpu, &g2_out_rs_e, 0);
>> +}
>> +
>>   void hantro_postproc_disable(struct hantro_ctx *ctx)
>>   {
>>   	struct hantro_dev *vpu = ctx->dev;
>> @@ -172,3 +198,8 @@ const struct hantro_postproc_ops hantro_g1_postproc_ops
> = {
>>   	.enable = hantro_postproc_g1_enable,
>>   	.disable = hantro_postproc_g1_disable,
>>   };
>> +
>> +const struct hantro_postproc_ops hantro_g2_postproc_ops = {
>> +	.enable = hantro_postproc_g2_enable,
>> +	.disable = hantro_postproc_g2_disable,
>> +};
>> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/
> media/hantro/imx8m_vpu_hw.c
>> index 455a107ffb02..1a43f6fceef9 100644
>> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> @@ -132,6 +132,14 @@ static const struct hantro_fmt imx8m_vpu_dec_fmts[] = {
>>   	},
>>   };
>>   
>> +static const struct hantro_fmt imx8m_vpu_g2_postproc_fmts[] = {
>> +	{
>> +		.fourcc = V4L2_PIX_FMT_NV12,
>> +		.codec_mode = HANTRO_MODE_NONE,
>> +		.postprocessed = true,
>> +	},
>> +};
>> +
>>   static const struct hantro_fmt imx8m_vpu_g2_dec_fmts[] = {
>>   	{
>>   		.fourcc = V4L2_PIX_FMT_NV12_4L4,
>> @@ -301,6 +309,9 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
>>   	.dec_offset = 0x0,
>>   	.dec_fmts = imx8m_vpu_g2_dec_fmts,
>>   	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts),
>> +	.postproc_fmts = imx8m_vpu_g2_postproc_fmts,
>> +	.num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_g2_postproc_fmts),
>> +	.postproc_ops = &hantro_g2_postproc_ops,
>>   	.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
>>   	.codec_ops = imx8mq_vpu_g2_codec_ops,
>>   	.init = imx8mq_vpu_hw_init,
>> -- 
>> 2.17.1
>>
>>
> 
> 

Powered by blists - more mailing lists