[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211015141107.2430800-5-narmstrong@baylibre.com>
Date: Fri, 15 Oct 2021 16:11:05 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: daniel@...ll.ch, Laurent.pinchart@...asonboard.com,
sam@...nborg.org
Cc: martin.blumenstingl@...glemail.com,
dri-devel@...ts.freedesktop.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH v2 4/6] drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.
The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
Acked-by: Sam Ravnborg <sam@...nborg.org>
---
drivers/gpu/drm/meson/Kconfig | 2 +
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
drivers/gpu/drm/meson/meson_encoder_hdmi.c | 81 +++++++++++++++++++++-
3 files changed, 82 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
index 9f9281dd49f8..a4e1ed96e5e8 100644
--- a/drivers/gpu/drm/meson/Kconfig
+++ b/drivers/gpu/drm/meson/Kconfig
@@ -6,9 +6,11 @@ config DRM_MESON
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
select DRM_GEM_CMA_HELPER
+ select DRM_DISPLAY_CONNECTOR
select VIDEOMODE_HELPERS
select REGMAP_MMIO
select MESON_CANVAS
+ select CEC_CORE if CEC_NOTIFIER
config DRM_MESON_DW_HDMI
tristate "HDMI Synopsys Controller support for Amlogic Meson Display"
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index fb540a503efe..5cd2b2ebbbd3 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -803,6 +803,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
dw_plat_data->ycbcr_420_allowed = true;
dw_plat_data->disable_cec = true;
+ dw_plat_data->output_port = 1;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
index 971da662c954..32f52f1c423b 100644
--- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
@@ -14,8 +14,11 @@
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <media/cec-notifier.h>
+
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
#include <drm/drm_device.h>
#include <drm/drm_edid.h>
#include <drm/drm_probe_helper.h>
@@ -33,8 +36,10 @@ struct meson_encoder_hdmi {
struct drm_encoder encoder;
struct drm_bridge bridge;
struct drm_bridge *next_bridge;
+ struct drm_connector *connector;
struct meson_drm *priv;
unsigned long output_bus_fmt;
+ struct cec_notifier *cec_notifier;
};
#define bridge_to_meson_encoder_hdmi(x) \
@@ -49,6 +54,14 @@ static int meson_encoder_hdmi_attach(struct drm_bridge *bridge,
&encoder_hdmi->bridge, flags);
}
+static void meson_encoder_hdmi_detach(struct drm_bridge *bridge)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+
+ cec_notifier_conn_unregister(encoder_hdmi->cec_notifier);
+ encoder_hdmi->cec_notifier = NULL;
+}
+
static void meson_encoder_hdmi_enable(struct drm_bridge *bridge)
{
struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
@@ -302,11 +315,32 @@ static int meson_encoder_hdmi_atomic_check(struct drm_bridge *bridge,
return 0;
}
+static void meson_encoder_hdmi_hpd_notify(struct drm_bridge *bridge,
+ enum drm_connector_status status)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+ struct edid *edid;
+
+ if (!encoder_hdmi->cec_notifier)
+ return;
+
+ if (status == connector_status_connected) {
+ edid = drm_bridge_get_edid(encoder_hdmi->next_bridge, encoder_hdmi->connector);
+ if (!edid)
+ return;
+
+ cec_notifier_set_phys_addr_from_edid(encoder_hdmi->cec_notifier, edid);
+ } else
+ cec_notifier_phys_addr_invalidate(encoder_hdmi->cec_notifier);
+}
+
static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
.attach = meson_encoder_hdmi_attach,
+ .detach = meson_encoder_hdmi_detach,
.enable = meson_encoder_hdmi_enable,
.disable = meson_encoder_hdmi_disable,
.mode_valid = meson_encoder_hdmi_mode_valid,
+ .hpd_notify = meson_encoder_hdmi_hpd_notify,
.atomic_enable = meson_encoder_hdmi_atomic_enable,
.atomic_get_input_bus_fmts = meson_encoder_hdmi_get_inp_bus_fmts,
.atomic_check = meson_encoder_hdmi_atomic_check,
@@ -318,6 +352,7 @@ static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
int meson_encoder_hdmi_init(struct meson_drm *priv)
{
struct meson_encoder_hdmi *meson_encoder_hdmi;
+ struct platform_device *pdev;
struct device_node *remote;
int ret;
@@ -342,6 +377,7 @@ int meson_encoder_hdmi_init(struct meson_drm *priv)
meson_encoder_hdmi->bridge.funcs = &meson_encoder_hdmi_bridge_funcs;
meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
+ meson_encoder_hdmi->bridge.interlace_allowed = true;
drm_bridge_add(&meson_encoder_hdmi->bridge);
@@ -358,17 +394,58 @@ int meson_encoder_hdmi_init(struct meson_drm *priv)
meson_encoder_hdmi->encoder.possible_crtcs = BIT(0);
/* Attach HDMI Encoder Bridge to Encoder */
- ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL, 0);
+ ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
if (ret) {
dev_err(priv->dev, "Failed to attach bridge: %d\n", ret);
return ret;
}
+ /* Initialize & attach Bridge Connector */
+ meson_encoder_hdmi->connector = drm_bridge_connector_init(priv->drm,
+ &meson_encoder_hdmi->encoder);
+ if (IS_ERR(meson_encoder_hdmi->connector)) {
+ dev_err(priv->dev, "Unable to create HDMI bridge connector\n");
+ return PTR_ERR(meson_encoder_hdmi->connector);
+ }
+ drm_connector_attach_encoder(meson_encoder_hdmi->connector,
+ &meson_encoder_hdmi->encoder);
+
/*
* We should have now in place:
- * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[dw-hdmi connector]
+ * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[display connector bridge]->[display connector]
*/
+ /*
+ * drm_connector_attach_max_bpc_property() requires the
+ * connector to have a state.
+ */
+ drm_atomic_helper_connector_reset(meson_encoder_hdmi->connector);
+
+ if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
+ meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
+ meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+ drm_connector_attach_hdr_output_metadata_property(meson_encoder_hdmi->connector);
+
+ drm_connector_attach_max_bpc_property(meson_encoder_hdmi->connector, 8, 8);
+
+ /* Handle this here until handled by drm_bridge_connector_init() */
+ meson_encoder_hdmi->connector->ycbcr_420_allowed = true;
+
+ pdev = of_find_device_by_node(remote);
+ if (pdev) {
+ struct cec_connector_info conn_info;
+ struct cec_notifier *notifier;
+
+ cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
+
+ notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
+ if (!notifier)
+ return -ENOMEM;
+
+ meson_encoder_hdmi->cec_notifier = notifier;
+ }
+
dev_dbg(priv->dev, "HDMI encoder initialized\n");
return 0;
--
2.25.1
Powered by blists - more mailing lists