| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <cover.1634300660.git.naveennaidu479@gmail.com>
Date: Fri, 15 Oct 2021 19:56:31 +0530
From: Naveen Naidu <naveennaidu479@...il.com>
To: bhelgaas@...gle.com
Cc: Naveen Naidu <naveennaidu479@...il.com>,
linux-kernel-mentees@...ts.linuxfoundation.org,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-hyperv@...r.kernel.org,
linux-mediatek@...ts.infradead.org, linuxppc-dev@...ts.ozlabs.org,
linux-renesas-soc@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, Rob Herring <robh@...nel.org>,
Pali Rohár <pali@...nel.org>
Subject: [PATCH v2 00/24] Unify PCI error response checking
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error. There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.
This patch series adds PCI_ERROR_RESPONSE definition and other helper
definition SET_PCI_ERROR_RESPONSE and RESPONSE_IS_PCI_ERROR and uses it
where appropriate to make these checks consistent and easier to find.
This helps unify PCI error response checking and make error check
consistent and easier to find.
This series also ensures that the error response fabrication now happens
in the PCI_OP_READ and PCI_USER_READ_CONFIG. This removes the
responsibility from controller drivers to do the error response setting.
Patch 1:
- Adds the PCI_ERROR_RESPONSE and other related defintions
- All other patches are dependent on this patch. This patch needs to
be applied first, before the others
Patch 2:
- Error fabrication happens in PCI_OP_READ and PCI_USER_READ_CONFIG
whenever the data read via the controller driver fails.
- This patch needs to be applied before, Patch 4/24 to Patch 15/24 are
applied.
Patch 3:
- Uses SET_PCI_ERROR_RESPONSE() when device is not found and
RESPONSE_IS_PCI_ERROR() to check hardware read from the hardware.
Patch 4 - 15:
- Removes redundant error fabrication that happens in controller
drivers when the read from a PCI device fails.
- These patches are dependent on Patch 2/24 of the series.
- These can be applied in any order.
Patch 16 - 22:
- Uses RESPONSE_IS_PCI_ERROR() to check the reads from hardware
- Patches can be applied in any order.
Patch 23 - 24:
- Edits the comments to include PCI_ERROR_RESPONSE alsong with
0xFFFFFFFF, so that it becomes easier to grep for faulty
hardware reads.
Changelog
=========
v2:
- Instead of using SET_PCI_ERROR_RESPONSE in all controller drivers
to fabricate error response, only use them in PCI_OP_READ and
PCI_USER_READ_CONFIG
Naveen Naidu (24):
[PATCH 1/24] PCI: Add PCI_ERROR_RESPONSE and it's related definitions
[PATCH 2/24] PCI: Set error response in config access defines when ops->read() fails
[PATCH 3/24] PCI: Unify PCI error response checking
[PATCH 4/24] PCI: Remove redundant error fabrication when device read fails
[PATCH 5/24] PCI: thunder: Remove redundant error fabrication when device read fails
[PATCH 6/24] PCI: iproc: Remove redundant error fabrication when device read fails
[PATCH 7/24] PCI: mediatek: Remove redundant error fabrication when device read fails
[PATCH 8/24] PCI: exynos: Remove redundant error fabrication when device read fails
[PATCH 9/24] PCI: histb: Remove redundant error fabrication when device read fails
[PATCH 10/24] PCI: kirin: Remove redundant error fabrication when device read fails
[PATCH 11/24] PCI: aardvark: Remove redundant error fabrication when device read fails
[PATCH 12/24] PCI: mvebu: Remove redundant error fabrication when device read fails
[PATCH 13/24] PCI: altera: Remove redundant error fabrication when device read fails
[PATCH 14/24] PCI: rcar: Remove redundant error fabrication when device read fails
[PATCH 15/24] PCI: rockchip: Remove redundant error fabrication when device read fails
[PATCH 16/24] PCI/ERR: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 17/24] PCI: vmd: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 18/24] PCI: pciehp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 19/24] PCI/DPC: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 20/24] PCI/PME: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 21/24] PCI: cpqphp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 22/24] PCI: keystone: Use PCI_ERROR_RESPONSE to specify hardware error
[PATCH 23/24] PCI: hv: Use PCI_ERROR_RESPONSE to specify hardware read error
[PATCH 24/24] PCI: xgene: Use PCI_ERROR_RESPONSE to specify hardware error
drivers/pci/access.c | 36 ++++++++--------
drivers/pci/controller/dwc/pci-exynos.c | 4 +-
drivers/pci/controller/dwc/pci-keystone.c | 4 +-
drivers/pci/controller/dwc/pcie-histb.c | 4 +-
drivers/pci/controller/dwc/pcie-kirin.c | 4 +-
drivers/pci/controller/pci-aardvark.c | 10 +----
drivers/pci/controller/pci-hyperv.c | 2 +-
drivers/pci/controller/pci-mvebu.c | 8 +---
drivers/pci/controller/pci-thunder-ecam.c | 46 +++++++--------------
drivers/pci/controller/pci-thunder-pem.c | 4 +-
drivers/pci/controller/pci-xgene.c | 8 ++--
drivers/pci/controller/pcie-altera.c | 4 +-
drivers/pci/controller/pcie-iproc.c | 4 +-
drivers/pci/controller/pcie-mediatek.c | 11 +----
drivers/pci/controller/pcie-rcar-host.c | 4 +-
drivers/pci/controller/pcie-rockchip-host.c | 4 +-
drivers/pci/controller/vmd.c | 2 +-
drivers/pci/hotplug/cpqphp_ctrl.c | 4 +-
drivers/pci/hotplug/pciehp_hpc.c | 10 ++---
drivers/pci/pci.c | 10 ++---
drivers/pci/pcie/dpc.c | 4 +-
drivers/pci/pcie/pme.c | 4 +-
drivers/pci/probe.c | 10 ++---
include/linux/pci.h | 9 ++++
24 files changed, 87 insertions(+), 123 deletions(-)
--
2.25.1
Powered by blists - more mailing lists