Message-ID: <88c1bdfd-a388-bf1c-517c-eecc30649df6@collabora.com>
Date:   Fri, 15 Oct 2021 16:31:18 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
To:     Hsin-Hsiung Wang <hsin-hsiung.wang@...iatek.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, srv_heupstream@...iatek.com,
        Project_Global_Chrome_Upstream_Group@...iatek.com
Subject: Re: [PATCH v12 3/5] spmi: mediatek: Add support for MT6873/8192

> Add spmi support for MT6873/8192.
> 
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@...iatek.com>
> ---
> changes since v11:
> - No change.
> ---
>   drivers/spmi/Kconfig         |  10 +
>   drivers/spmi/Makefile        |   2 +
>   drivers/spmi/spmi-mtk-pmif.c | 459 +++++++++++++++++++++++++++++++++++
>   3 files changed, 471 insertions(+)
>   create mode 100644 drivers/spmi/spmi-mtk-pmif.c
> 
> diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
> index 2874b6c26028..ea5703f6e544 100644
> --- a/drivers/spmi/Kconfig
> +++ b/drivers/spmi/Kconfig
> @@ -34,4 +34,14 @@ config SPMI_MSM_PMIC_ARB
>   	  This is required for communicating with Qualcomm PMICs and
>   	  other devices that have the SPMI interface.
>   
> +config SPMI_MTK_PMIF
> +	tristate "Mediatek SPMI Controller (PMIC Arbiter)"

This driver should be useless without a MediaTek SoC, for which reason, I would
add here a nice

	depends on ARCH_MEDIATEK || COMPILE_TEST

> +	help
> +	  If you say yes to this option, support will be included for the
> +	  built-in SPMI PMIC Arbiter interface on Mediatek family
> +	  processors.
> +
> +	  This is required for communicating with Mediatek PMICs and
> +	  other devices that have the SPMI interface.
> +
>   endif
> diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
> index 6e092e6f290c..0b21aaffcbb9 100644
> --- a/drivers/spmi/Makefile
> +++ b/drivers/spmi/Makefile
> @@ -6,3 +6,5 @@ obj-$(CONFIG_SPMI)	+= spmi.o
>   
>   obj-$(CONFIG_SPMI_HISI3670)	+= hisi-spmi-controller.o
>   obj-$(CONFIG_SPMI_MSM_PMIC_ARB)	+= spmi-pmic-arb.o
> +obj-$(CONFIG_SPMI_MTK_PMIF)	+= spmi-mtk-pmif.o
> +
> diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
> new file mode 100644
> index 000000000000..35d338a19d76
> --- /dev/null
> +++ b/drivers/spmi/spmi-mtk-pmif.c
> @@ -0,0 +1,459 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2021 MediaTek Inc.
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/spmi.h>
> +
> +#define SWINF_IDLE	0x00
> +#define SWINF_WFVLDCLR	0x06
> +
> +#define GET_SWINF(x)	(((x) >> 1) & 0x7)
> +
> +#define PMIF_CMD_REG_0		0
> +#define PMIF_CMD_REG		1
> +#define PMIF_CMD_EXT_REG	2
> +#define PMIF_CMD_EXT_REG_LONG	3
> +
> +#define PMIF_DELAY_US   10
> +#define PMIF_TIMEOUT_US (10 * 1000)
> +
> +#define PMIF_CHAN_OFFSET 0x5
> +
> +#define PMIF_MAX_CLKS	3
> +
> +#define SPMI_OP_ST_BUSY 1
> +
> +struct ch_reg {
> +	u32 ch_sta;
> +	u32 wdata;
> +	u32 rdata;
> +	u32 ch_send;
> +	u32 ch_rdy;
> +};
> +
> +struct pmif_data {
> +	const u32	*regs;
> +	const u32	*spmimst_regs;
> +	u32	soc_chan;
> +};
> +
> +struct pmif {
> +	void __iomem	*base;
> +	void __iomem	*spmimst_base;
> +	struct ch_reg	chan;
> +	struct clk_bulk_data clks[PMIF_MAX_CLKS];
> +	size_t nclks;
> +	const struct pmif_data *data;
> +};
> +
> +static const char * const pmif_clock_names[] = {
> +	"pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux",
> +};
> +
> +enum pmif_regs {
> +	PMIF_INIT_DONE,
> +	PMIF_INF_EN,
> +	PMIF_ARB_EN,
> +	PMIF_CMDISSUE_EN,
> +	PMIF_TIMER_CTRL,
> +	PMIF_SPI_MODE_CTRL,
> +	PMIF_IRQ_EVENT_EN_0,
> +	PMIF_IRQ_FLAG_0,
> +	PMIF_IRQ_CLR_0,
> +	PMIF_IRQ_EVENT_EN_1,
> +	PMIF_IRQ_FLAG_1,
> +	PMIF_IRQ_CLR_1,
> +	PMIF_IRQ_EVENT_EN_2,
> +	PMIF_IRQ_FLAG_2,
> +	PMIF_IRQ_CLR_2,
> +	PMIF_IRQ_EVENT_EN_3,
> +	PMIF_IRQ_FLAG_3,
> +	PMIF_IRQ_CLR_3,
> +	PMIF_IRQ_EVENT_EN_4,
> +	PMIF_IRQ_FLAG_4,
> +	PMIF_IRQ_CLR_4,
> +	PMIF_WDT_EVENT_EN_0,
> +	PMIF_WDT_FLAG_0,
> +	PMIF_WDT_EVENT_EN_1,
> +	PMIF_WDT_FLAG_1,
> +	PMIF_SWINF_0_STA,
> +	PMIF_SWINF_0_WDATA_31_0,
> +	PMIF_SWINF_0_RDATA_31_0,
> +	PMIF_SWINF_0_ACC,
> +	PMIF_SWINF_0_VLD_CLR,
> +	PMIF_SWINF_1_STA,
> +	PMIF_SWINF_1_WDATA_31_0,
> +	PMIF_SWINF_1_RDATA_31_0,
> +	PMIF_SWINF_1_ACC,
> +	PMIF_SWINF_1_VLD_CLR,
> +	PMIF_SWINF_2_STA,
> +	PMIF_SWINF_2_WDATA_31_0,
> +	PMIF_SWINF_2_RDATA_31_0,
> +	PMIF_SWINF_2_ACC,
> +	PMIF_SWINF_2_VLD_CLR,
> +	PMIF_SWINF_3_STA,
> +	PMIF_SWINF_3_WDATA_31_0,
> +	PMIF_SWINF_3_RDATA_31_0,
> +	PMIF_SWINF_3_ACC,
> +	PMIF_SWINF_3_VLD_CLR,
> +};
> +
> +static const u32 mt6873_regs[] = {
> +	[PMIF_INIT_DONE] =	0x0000,
> +	[PMIF_INF_EN] =		0x0024,
> +	[PMIF_ARB_EN] =		0x0150,
> +	[PMIF_CMDISSUE_EN] =	0x03B4,
> +	[PMIF_TIMER_CTRL] =	0x03E0,
> +	[PMIF_SPI_MODE_CTRL] =	0x0400,
> +	[PMIF_IRQ_EVENT_EN_0] =	0x0418,
> +	[PMIF_IRQ_FLAG_0] =	0x0420,
> +	[PMIF_IRQ_CLR_0] =	0x0424,
> +	[PMIF_IRQ_EVENT_EN_1] =	0x0428,
> +	[PMIF_IRQ_FLAG_1] =	0x0430,
> +	[PMIF_IRQ_CLR_1] =	0x0434,
> +	[PMIF_IRQ_EVENT_EN_2] =	0x0438,
> +	[PMIF_IRQ_FLAG_2] =	0x0440,
> +	[PMIF_IRQ_CLR_2] =	0x0444,
> +	[PMIF_IRQ_EVENT_EN_3] =	0x0448,
> +	[PMIF_IRQ_FLAG_3] =	0x0450,
> +	[PMIF_IRQ_CLR_3] =	0x0454,
> +	[PMIF_IRQ_EVENT_EN_4] =	0x0458,
> +	[PMIF_IRQ_FLAG_4] =	0x0460,
> +	[PMIF_IRQ_CLR_4] =	0x0464,
> +	[PMIF_WDT_EVENT_EN_0] =	0x046C,
> +	[PMIF_WDT_FLAG_0] =	0x0470,
> +	[PMIF_WDT_EVENT_EN_1] =	0x0474,
> +	[PMIF_WDT_FLAG_1] =	0x0478,
> +	[PMIF_SWINF_0_ACC] =	0x0C00,
> +	[PMIF_SWINF_0_WDATA_31_0] =	0x0C04,
> +	[PMIF_SWINF_0_RDATA_31_0] =	0x0C14,
> +	[PMIF_SWINF_0_VLD_CLR] =	0x0C24,
> +	[PMIF_SWINF_0_STA] =	0x0C28,
> +	[PMIF_SWINF_1_ACC] =	0x0C40,
> +	[PMIF_SWINF_1_WDATA_31_0] =	0x0C44,
> +	[PMIF_SWINF_1_RDATA_31_0] =	0x0C54,
> +	[PMIF_SWINF_1_VLD_CLR] =	0x0C64,
> +	[PMIF_SWINF_1_STA] =	0x0C68,
> +	[PMIF_SWINF_2_ACC] =	0x0C80,
> +	[PMIF_SWINF_2_WDATA_31_0] =	0x0C84,
> +	[PMIF_SWINF_2_RDATA_31_0] =	0x0C94,
> +	[PMIF_SWINF_2_VLD_CLR] =	0x0CA4,
> +	[PMIF_SWINF_2_STA] =	0x0CA8,
> +	[PMIF_SWINF_3_ACC] =	0x0CC0,
> +	[PMIF_SWINF_3_WDATA_31_0] =	0x0CC4,
> +	[PMIF_SWINF_3_RDATA_31_0] =	0x0CD4,
> +	[PMIF_SWINF_3_VLD_CLR] =	0x0CE4,
> +	[PMIF_SWINF_3_STA] =	0x0CE8,
> +};

Hello!

Can you please either use simply a space, or fix your tabulations indentation?

> +
> +enum spmi_regs {
> +	SPMI_OP_ST_CTRL,
> +	SPMI_GRP_ID_EN,
> +	SPMI_OP_ST_STA,
> +	SPMI_MST_SAMPL,
> +	SPMI_MST_REQ_EN,
> +	SPMI_REC_CTRL,
> +	SPMI_REC0,
> +	SPMI_REC1,
> +	SPMI_REC2,
> +	SPMI_REC3,
> +	SPMI_REC4,
> +	SPMI_MST_DBG,
> +};
> +
> +static const u32 mt6873_spmi_regs[] = {
> +	[SPMI_OP_ST_CTRL] =	0x0000,
> +	[SPMI_GRP_ID_EN] =	0x0004,
> +	[SPMI_OP_ST_STA] =	0x0008,
> +	[SPMI_MST_SAMPL] =	0x000c,
> +	[SPMI_MST_REQ_EN] =	0x0010,
> +	[SPMI_REC_CTRL] =	0x0040,
> +	[SPMI_REC0] =		0x0044,
> +	[SPMI_REC1] =		0x0048,
> +	[SPMI_REC2] =		0x004c,
> +	[SPMI_REC3] =		0x0050,
> +	[SPMI_REC4] =		0x0054,
> +	[SPMI_MST_DBG] =	0x00fc,
> +};
> +
> +static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
> +{
> +	return readl(arb->base + arb->data->regs[reg]);
> +}
> +
> +static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
> +{
> +	writel(val, arb->base + arb->data->regs[reg]);
> +}
> +
> +static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
> +{
> +	writel(val, arb->spmimst_base + arb->data->spmimst_regs[reg]);
> +}
> +
> +static bool pmif_is_fsm_vldclr(struct pmif *arb)
> +{
> +	u32 reg_rdata;
> +
> +	reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
> +
> +	return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
> +}
> +
> +static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
> +{
> +	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> +	u32 rdata, cmd;
> +	int ret;
> +
> +	/* Check the opcode */
> +	if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
> +		return -EINVAL;
> +
> +	cmd = opc - SPMI_CMD_RESET;
> +
> +	mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
> +	ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA],
> +					rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
> +					PMIF_DELAY_US, PMIF_TIMEOUT_US);
> +	if (ret < 0)
> +		dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> +			      u16 addr, u8 *buf, size_t len)
> +{
> +	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> +	struct ch_reg *inf_reg;
> +	int ret;
> +	u32 data, cmd;
> +
> +	/* Check for argument validation. */
> +	if (sid & ~0xf) {
> +		dev_err(&ctrl->dev, "exceed the max slv id\n");
> +		return -EINVAL;
> +	}
> +
> +	if (len > 4) {
> +		dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
> +
> +		return -EINVAL;
> +	}
> +
> +	if (opc >= 0x60 && opc <= 0x7f)
> +		opc = PMIF_CMD_REG;
> +	else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))
> +		opc = PMIF_CMD_EXT_REG_LONG;
> +	else
> +		return -EINVAL;
> +
> +	/* Wait for Software Interface FSM state to be IDLE. */
> +	inf_reg = &arb->chan;
> +	ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
> +					data, GET_SWINF(data) == SWINF_IDLE,
> +					PMIF_DELAY_US, PMIF_TIMEOUT_US);
> +	if (ret < 0) {
> +		/* set channel ready if the data has transferred */
> +		if (pmif_is_fsm_vldclr(arb))
> +			pmif_writel(arb, 1, inf_reg->ch_rdy);
> +		dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
> +		goto out;

You can just return ret here, instead of jumping to the out label.

> +	}
> +
> +	/* Send the command. */
> +	cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr;
> +	pmif_writel(arb, cmd, inf_reg->ch_send);
> +
> +	/*
> +	 * Wait for Software Interface FSM state to be WFVLDCLR,
> +	 * read the data and clear the valid flag.
> +	 */
> +	ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
> +					data, GET_SWINF(data) == SWINF_WFVLDCLR,
> +					PMIF_DELAY_US, PMIF_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
> +		goto out;

Same here

> +	}
> +
> +	data = pmif_readl(arb, inf_reg->rdata);
> +	memcpy(buf, &data, len);
> +	pmif_writel(arb, 1, inf_reg->ch_rdy);
> +
> +out:
> +	if (ret < 0)
> +		return ret;

...and after the fixes, you won't need this label, nor this check here anymore.

> +
> +	return 0;
> +}
> +
> +static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> +			       u16 addr, const u8 *buf, size_t len)
> +{
> +	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> +	struct ch_reg *inf_reg;
> +	int ret;
> +	u32 data, cmd;
> +
> +	if (len > 4) {
> +		dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
> +
> +		return -EINVAL;
> +	}
> +
> +	/* Check the opcode */
> +	if (opc >= 0x40 && opc <= 0x5F)
> +		opc = PMIF_CMD_REG;
> +	else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37))
> +		opc = PMIF_CMD_EXT_REG_LONG;
> +	else if (opc >= 0x80)
> +		opc = PMIF_CMD_REG_0;
> +	else
> +		return -EINVAL;
> +
> +	/* Wait for Software Interface FSM state to be IDLE. */
> +	inf_reg = &arb->chan;
> +	ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
> +					data, GET_SWINF(data) == SWINF_IDLE,
> +					PMIF_DELAY_US, PMIF_TIMEOUT_US);
> +	if (ret < 0) {
> +		/* set channel ready if the data has transferred */
> +		if (pmif_is_fsm_vldclr(arb))
> +			pmif_writel(arb, 1, inf_reg->ch_rdy);
> +		dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
> +		goto out;

Just return ret here.

> +	}
> +
> +	/* Set the write data. */
> +	memcpy(&data, buf, len);
> +	pmif_writel(arb, data, inf_reg->wdata);
> +
> +	/* Send the command. */
> +	cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr;
> +	pmif_writel(arb, cmd, inf_reg->ch_send);
> +
> +out:

...and this label can then also disappear.

After these fixes,
Acked-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>

Powered by blists - more mailing lists