[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211017122328.295af1b2@jic23-huawei>
Date: Sun, 17 Oct 2021 12:23:28 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: David Lechner <david@...hnology.com>
Cc: linux-iio@...r.kernel.org,
William Breathitt Gray <vilhelm.gray@...il.com>,
Robert Nelson <robertcnelson@...il.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/8] docs: counter: add unit timer sysfs attributes
On Sat, 16 Oct 2021 20:33:39 -0500
David Lechner <david@...hnology.com> wrote:
> This documents new unit timer sysfs attributes for the counter
> subsystem.
>
> Signed-off-by: David Lechner <david@...hnology.com>
The ti-eqep.c change needs moving to patch 1 where the typo was introduced.
> ---
> Documentation/ABI/testing/sysfs-bus-counter | 24 +++++++++++++++++++++
> drivers/counter/ti-eqep.c | 2 +-
> 2 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
> index 06c2b3e27e0b..37d960a8cb1b 100644
> --- a/Documentation/ABI/testing/sysfs-bus-counter
> +++ b/Documentation/ABI/testing/sysfs-bus-counter
> @@ -218,6 +218,9 @@ What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
> What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
> What: /sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
> What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
> +What: /sys/bus/counter/devices/unit_timer_enable_component_id
> +What: /sys/bus/counter/devices/unit_timer_period_component_id
> +What: /sys/bus/counter/devices/unit_timer_time_component_id
> KernelVersion: 5.16
> Contact: linux-iio@...r.kernel.org
> Description:
> @@ -345,3 +348,24 @@ Description:
> via index_polarity. The index function (as enabled via
> preset_enable) is performed synchronously with the
> quadrature clock on the active level of the index input.
> +
> +What: /sys/bus/counter/devices/unit_timer_enable
> +KernelVersion: 5.16
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Read/write attribute that starts or stops the unit timer. Valid
> + values are boolean.
> +
> +What: /sys/bus/counter/devices/unit_timer_period
> +KernelVersion: 5.16
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Read/write attribute that selects the unit timer timeout in
> + nanoseconds.
> +
> +What: /sys/bus/counter/devices/unit_timer_time
> +KernelVersion: 5.16
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Read/write attribute that indicates the current time of the
> + unit timer in nanoseconds.
> diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
> index a4a5a4486329..1ba7f3c7cb7e 100644
> --- a/drivers/counter/ti-eqep.c
> +++ b/drivers/counter/ti-eqep.c
> @@ -680,7 +680,7 @@ static int ti_eqep_probe(struct platform_device *pdev)
> pm_runtime_get_sync(dev);
>
> /*
> - * We can end up with an interupt infinite loop (interrupts triggered
> + * We can end up with an interrupt infinite loop (interrupts triggered
This change should be in a separate patch.
> * as soon as they are cleared) if we leave these at the default value
> * of 0 and events are enabled.
> */
Powered by blists - more mailing lists