lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 18 Oct 2021 01:19:54 +0900
From:   Tsuchiya Yuto <>
To:     unlisted-recipients:; (no To-header on input)
Cc:     Hans de Goede <>,
        Patrik Gfeller <>,
        Tsuchiya Yuto <>,
        Mauro Carvalho Chehab <>,
        Sakari Ailus <>,
        Greg Kroah-Hartman <>,
        Kaixu Xia <>,
        Baokun Li <>,
        Hans Verkuil <>,
        Aditya Srivastava <>,
        Aline Santana Cordeiro <>,
        Yang Yingliang <>,
        Alan <>,
        Dinghao Liu <>,,,
Subject: [PATCH 14/17] media: atomisp: pci: Remove remaining instance of call to trace_printk

(patch based on intel-aero kernel patch:

Here is the original commit message from the aforementioned patch:

	From 26fc9fe5030b63bc9dcf0b5f32981948911ca272 Mon Sep 17 00:00:00 2001
	From: Lucas De Marchi <>
	Date: Fri, 7 Jul 2017 14:23:53 -0700
	Subject: [PATCH] linux-yocto: Remove remaining instance of call to

	It's not sufficient to leave trace_printk() out of "normal call chains" since
	the way trace infrastructure works is that it will allocate the trace_printk
	buffers if the symbol is there (by using a separate section for the function
	and checking if __start_* and __stop_* symbols are different.

	Therefore, even if the default value for the param tells the module to use
	printk(), just the fact that it can be changed to trace_printk() means the
	initialization code will be called.

The trace_printk() was replaced by pr_info() on commit 3d81099c75a6
("media: atomisp: Replace trace_printk by pr_info") for the upstreamed
atomisp, too. However, as the aforementioned commit message says, there
is still a remaining instance. This causes the "trace_printk() being
used" kernel warning message to still appear on the first driver load.

Based on the aforementioned patch, this patch removes the call to
ftrace_vprintk(). This removes that kernel warning.

In addition to this, this patch also removes the following now unused

    - now empty atomisp_css2_dbg_ftrace_print()
    - trace_printk option from dbg_func kernel parameter

Signed-off-by: Tsuchiya Yuto <>
 .../staging/media/atomisp/pci/atomisp_compat_css20.c   | 10 ----------
 drivers/staging/media/atomisp/pci/atomisp_v4l2.c       |  4 ++--
 2 files changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
index 99a632f33d2d..d81d55c6f1fa 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
@@ -159,13 +159,6 @@ static void atomisp_css2_hw_load(hrt_address addr, void *to, uint32_t n)
 	spin_unlock_irqrestore(&mmio_lock, flags);
-static int  __printf(1, 0) atomisp_css2_dbg_ftrace_print(const char *fmt,
-							 va_list args)
-	ftrace_vprintk(fmt, args);
-	return 0;
 static int  __printf(1, 0) atomisp_vprintk(const char *fmt, va_list args)
 	vprintk(fmt, args);
@@ -860,9 +853,6 @@ static inline int __set_css_print_env(struct atomisp_device *isp, int opt)
 	if (opt == 0)
 		isp->css_env.isp_css_env.print_env.debug_print = NULL;
 	else if (opt == 1)
-		isp->css_env.isp_css_env.print_env.debug_print =
-		    atomisp_css2_dbg_ftrace_print;
-	else if (opt == 2)
 		isp->css_env.isp_css_env.print_env.debug_print = atomisp_vprintk;
 		ret = -EINVAL;
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index f5362554638e..720963156d24 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -87,10 +87,10 @@ module_param(dbg_level, int, 0644);
 MODULE_PARM_DESC(dbg_level, "debug message level (default:0)");
 /* log function switch */
-int dbg_func = 2;
+int dbg_func = 1;
 module_param(dbg_func, int, 0644);
-		 "log function switch non/trace_printk/printk (default:printk)");
+		 "log function switch non/printk (default:printk)");
 int mipicsi_flag;
 module_param(mipicsi_flag, int, 0644);

Powered by blists - more mailing lists