| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211017162337.44860-5-kitakar@gmail.com>
Date: Mon, 18 Oct 2021 01:23:35 +0900
From: Tsuchiya Yuto <kitakar@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Hans de Goede <hdegoede@...hat.com>,
Patrik Gfeller <patrik.gfeller@...il.com>,
Tsuchiya Yuto <kitakar@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Peter Zijlstra <peterz@...radead.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Kaixu Xia <kaixuxia@...cent.com>,
Arnd Bergmann <arnd@...db.de>,
Dan Carpenter <dan.carpenter@...cle.com>,
linux-media@...r.kernel.org, linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: [BUG 4/5] [BUG] media: atomisp: `modprobe -r` not working well (dup video4linux, ATOMISP_SUBDEV_{0,1})
This is just a BUG report and I don't have any patch for this issue.
For now, I use rmmod/insmod to reload atomisp modules.
When I use `modprobe -r` to unload atomisp drivers like the following,
$ sudo modprobe -r atomisp
$ sudo modprobe -r atomisp-ar0330
$ sudo modprobe -r atomisp-ov883x
it will fail to initialize on next load (with both modprobe and insmod).
Steps to reproduce:
1. boot without denylisting any atomisp modules (or load modules using
modprobe manually)
2. unload drivers with `modprobe -r`
3. try to load drivers (modprobe or insmod)
4. probe fails saying "duplicate filename [...] video4linux"
(log available below)
Note:
1. `modprobe -r` works when booting with denylisting then insmod-ing
2. rmmod always works without errors
Here is the dmesg log:
kern :warn : [ 150.326240] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/video4linux'
kern :warn : [ 150.326246] CPU: 1 PID: 2739 Comm: modprobe Tainted: G C OE 5.15.0-rc3-1-surface-mainline #1 22942c127770b6216143942411a0f5916a743a60
kern :warn : [ 150.326257] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
kern :warn : [ 150.326262] Call Trace:
kern :warn : [ 150.326276] dump_stack_lvl+0x46/0x5a
kern :warn : [ 150.326292] sysfs_warn_dup.cold+0x17/0x24
kern :warn : [ 150.326304] sysfs_create_dir_ns+0xcc/0xe0
kern :warn : [ 150.326318] kobject_add_internal+0xbd/0x2b0
kern :warn : [ 150.326330] kobject_add+0x98/0xd0
kern :warn : [ 150.326338] ? kmem_cache_alloc_trace+0x15c/0x2f0
kern :warn : [ 150.326352] get_device_parent+0x15e/0x1c0
kern :warn : [ 150.326365] device_add+0xd9/0x9a0
kern :warn : [ 150.326375] __video_register_device+0x8ee/0x11f0 [videodev 2ea57a870000384ef8d27d4d70e6e51a68e3f718]
kern :warn : [ 150.326420] atomisp_subdev_register_entities+0x83/0x220 [atomisp 752573cebc128314ca99d40a85c7801ade7015b0]
kern :warn : [ 150.326528] atomisp_pci_probe.cold+0xec3/0x1492 [atomisp 752573cebc128314ca99d40a85c7801ade7015b0]
kern :warn : [ 150.326625] local_pci_probe+0x45/0x80
kern :warn : [ 150.326634] ? pci_match_device+0xd7/0x130
kern :warn : [ 150.326640] pci_device_probe+0xfa/0x1b0
kern :warn : [ 150.326650] really_probe+0x1f5/0x3f0
kern :warn : [ 150.326661] __driver_probe_device+0xfe/0x180
kern :warn : [ 150.326667] driver_probe_device+0x1e/0x90
kern :warn : [ 150.326674] __driver_attach+0xc0/0x1c0
kern :warn : [ 150.326680] ? __device_attach_driver+0xe0/0xe0
kern :warn : [ 150.326685] ? __device_attach_driver+0xe0/0xe0
kern :warn : [ 150.326691] bus_for_each_dev+0x89/0xd0
kern :warn : [ 150.326698] bus_add_driver+0x12b/0x1e0
kern :warn : [ 150.326704] driver_register+0x8f/0xe0
kern :warn : [ 150.326712] ? 0xffffffffc09e6000
kern :warn : [ 150.326717] do_one_initcall+0x57/0x220
kern :warn : [ 150.326733] do_init_module+0x5c/0x260
kern :warn : [ 150.326745] load_module+0x24bd/0x26a0
kern :warn : [ 150.326760] ? __do_sys_finit_module+0xae/0x110
kern :warn : [ 150.326766] __do_sys_finit_module+0xae/0x110
kern :warn : [ 150.326777] do_syscall_64+0x5c/0x80
kern :warn : [ 150.326789] ? __audit_syscall_exit+0x24d/0x2a0
kern :warn : [ 150.326796] ? syscall_exit_to_user_mode+0x23/0x40
kern :warn : [ 150.326804] ? do_syscall_64+0x69/0x80
kern :warn : [ 150.326810] ? do_syscall_64+0x69/0x80
kern :warn : [ 150.326816] entry_SYSCALL_64_after_hwframe+0x44/0xae
kern :warn : [ 150.326824] RIP: 0033:0x7f33b9de918d
kern :warn : [ 150.326832] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
kern :warn : [ 150.326836] RSP: 002b:00007fffce4b44a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
kern :warn : [ 150.326846] RAX: ffffffffffffffda RBX: 00005643ae549e10 RCX: 00007f33b9de918d
kern :warn : [ 150.326851] RDX: 0000000000000000 RSI: 00005643acc65270 RDI: 0000000000000005
kern :warn : [ 150.326854] RBP: 0000000000040000 R08: 0000000000000000 R09: 00005643ae549f20
kern :warn : [ 150.326858] R10: 0000000000000005 R11: 0000000000000246 R12: 00005643acc65270
kern :warn : [ 150.326861] R13: 0000000000000000 R14: 00005643ae549cc0 R15: 00005643ae549e10
kern :err : [ 150.326871] kobject_add_internal failed for video4linux with -EEXIST, don't try to register things with the same name in the same directory.
kern :err : [ 150.326878] videodev: __video_register_device: device_register failed
kern :err : [ 150.326903] atomisp-isp2 0000:00:03.0: atomisp_subdev_register_entities fail
kern :err : [ 150.326918] atomisp-isp2 0000:00:03.0: atomisp_register_entities failed (-17)
kern :warn : [ 150.328150] atomisp-isp2: probe of 0000:00:03.0 failed with error -17
Later, I found that after unloading atomisp module (by both
rmmod and `modprobe -r`), ATOMISP_SUBDEV_0 and ATOMISP_SUBDEV_1 were left
under /sys/class/video4linux directory:
# list v4l device names
$ grep . /sys/class/video4linux/*/name
/sys/class/video4linux/v4l-subdev7/name:ATOMISP_SUBDEV_0
/sys/class/video4linux/v4l-subdev8/name:ATOMISP_SUBDEV_1
These files will be added every time I reload atomisp module using
rmmod/insmod:
/sys/class/video4linux/v4l-subdev7/name:ATOMISP_SUBDEV_0
/sys/class/video4linux/v4l-subdev8/name:ATOMISP_SUBDEV_1
/sys/class/video4linux/v4l-subdev9/name:ATOMISP_SUBDEV_0
/sys/class/video4linux/v4l-subdev10/name:ATOMISP_SUBDEV_1
Note 1:
Somehow I can't reproduce this issue on Android kernel (using
Mi Pad 2) and my port of intel-aero atomisp [1].
[1] https://github.com/kitakar5525/linux-kernel/tree/mainline+aero_atomisp_wo_kapi_changes-2021-10-11
Note 2:
Here is the complete reload script (using rmmod/insmod) I use on
Surface 3:
# reload atomisp camera modules
# somehow `modprobe -r` does not work well
sudo rmmod atomisp
sudo rmmod atomisp-ar0330
sudo rmmod atomisp-ov883x
sudo rmmod atomisp_gmin_platform
# load drivers needed for atomisp first for insmod
# for sensor drivers
sudo modprobe media # needed for older LTS
sudo modprobe videodev
sudo modprobe v4l2_common # needed for older LTS
sudo modprobe v4l2_async # if using async_register
# for atomisp pci driver
sudo modprobe videobuf-core
sudo modprobe videobuf-vmalloc
# insmod upstreamed atomisp
sudo insmod upst/atomisp_gmin_platform.ko
sudo insmod upst/surface3/atomisp-ar0330.ko
sudo insmod upst/surface3/atomisp-ov883x.ko
sudo insmod upst/atomisp.ko dbg_level=1 #dyndbg
--
2.33.1
Powered by blists - more mailing lists