linux-kernel - Re: [PATCH] arm64: defconfig: Enable Qualcomm LMH driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 18 Oct 2021 10:51:44 +0530
From:   Bhupesh Sharma <bhupesh.sharma@...aro.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Thara Gopinath <thara.gopinath@...aro.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>,
        linux-arm-kernel@...ts.infradead.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        MSM <linux-arm-msm@...r.kernel.org>
Subject: Re: [PATCH] arm64: defconfig: Enable Qualcomm LMH driver

On Mon, 18 Oct 2021 at 10:47, Bhupesh Sharma <bhupesh.sharma@...aro.org> wrote:
>
> Hi,
>
> On Mon, 18 Oct 2021 at 02:08, Bjorn Andersson
> <bjorn.andersson@...aro.org> wrote:
> >
> > With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom:
> > sdm845: Add support for LMh node")' the CPUfreq gained a reference for
> > the two interrupts from the LMh. This means that if the LMh driver isn't
> > enabled CPUfreq will not probe and there's no frequency scaling.
> >
> > Enable LMh to make CPUfreq functional again on SDM845.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > ---
> >  arch/arm64/configs/defconfig | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > index 86224aa3a74b..0ae6cd2748d2 100644
> > --- a/arch/arm64/configs/defconfig
> > +++ b/arch/arm64/configs/defconfig
> > @@ -577,6 +577,7 @@ CONFIG_TEGRA_BPMP_THERMAL=m
> >  CONFIG_TEGRA_SOCTHERM=m
> >  CONFIG_QCOM_TSENS=y
> >  CONFIG_QCOM_SPMI_TEMP_ALARM=m
> > +CONFIG_QCOM_LMH=m
> >  CONFIG_UNIPHIER_THERMAL=y
> >  CONFIG_WATCHDOG=y
> >  CONFIG_SL28CPLD_WATCHDOG=m
> > --
>
> Tested on SA8155p-ADP board, so:

Sorry, a typo here, I meant the patch was tested on the sdm845-mtp board here :)

> Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
>
> Regards.