linux-kernel - Re: [PATCH 1/2] arm64: dts: rk3328: add gpu opp table

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ecdce799-5b03-9c6b-6a98-e6a893b15900@arm.com>
Date:   Mon, 18 Oct 2021 19:09:25 +0100
From:   Robin Murphy <robin.murphy@....com>
To:     Trevor Woerner <twoerner@...il.com>,
        Johan Jonker <jbx6244@...il.com>
Cc:     linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Heiko Stuebner <heiko@...ech.de>, Chen-Yu Tsai <wens@...e.org>,
        David Wu <david.wu@...k-chips.com>,
        Ezequiel Garcia <ezequiel@...labora.com>,
        Cameron Nemo <cnemo@...anota.com>,
        Elaine Zhang <zhangqing@...k-chips.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        "moderated list:ARM/Rockchip SoC support" 
        <linux-arm-kernel@...ts.infradead.org>,
        "open list:ARM/Rockchip SoC support" 
        <linux-rockchip@...ts.infradead.org>
Subject: Re: [PATCH 1/2] arm64: dts: rk3328: add gpu opp table

On 2021-10-17 16:29, Trevor Woerner wrote:
> On Sat 2021-10-16 @ 10:45:04 PM, Johan Jonker wrote:
>> On 10/16/21 5:45 PM, Trevor Woerner wrote:
>>> Add an operating-points table and cooling entry to the GPU on the
>>> RK3328 SoC to improve its performance. According to its datasheet[1]
>>> the maximum frequency of the Mali-450 MP2 GPU found on the RK3328 SoC
>>> is 500MHz.
>>>
>>> On my rock64 device, under x11, glmark2-es2 performance increased from
>>> around 60 to just over 100. Same device running glmark2-es2 under
>>> wayland/weston improved from just over 100 to just over 200.
>>>
>>> [1] https://rockchip.fr/RK3328%20datasheet%20V1.2.pdf
>>>
>>> Signed-off-by: Trevor Woerner <twoerner@...il.com>
>>> ---
>>>   arch/arm64/boot/dts/rockchip/rk3328.dtsi | 26 +++++++++++++++++++++++-
>>>   1 file changed, 25 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>>> index 8c821acb21ff..5e1dcf71e414 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>>> @@ -532,7 +532,8 @@ map0 {
>>>   					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>   							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>   							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> -							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>   					contribution = <4096>;
>>>   				};
>>>   			};
>>> @@ -617,6 +618,29 @@ gpu: gpu@...00000 {
>>>   		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
>>>   		clock-names = "bus", "core";
>>>   		resets = <&cru SRST_GPU_A>;
>>> +		operating-points-v2 = <&gpu_opp_table>;
>>> +		#cooling-cells = <2>;
>>> +	};
>>> +
>>
>>> +	gpu_opp_table: gpu-opp-table {
>>
>> After the conversion to YAML of the Operating Performance Points(OPP)
>> binding the operating-points-v2 property expects the nodename to have
>> the '^opp-table(-[a-z0-9]+)?$' format.
>>
>> make ARCH=arm64 dtbs_check
>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/opp/opp-v2.yaml
> 
> Thanks, I wasn't aware.
> 
>>> +		compatible = "operating-points-v2";
>>> +
>>> +		opp-200000000 {
>>> +			opp-hz = /bits/ 64 <200000000>;
>>> +			opp-microvolt = <1100000>;
>>> +		};
>>> +		opp-300000000 {
>>> +			opp-hz = /bits/ 64 <300000000>;
>>> +			opp-microvolt = <1100000>;
>>> +		};
>>> +		opp-400000000 {
>>> +			opp-hz = /bits/ 64 <400000000>;
>>> +			opp-microvolt = <1100000>;
>>> +		};
>>> +		opp-500000000 {
>>> +			opp-hz = /bits/ 64 <500000000>;
>>> +			opp-microvolt = <1100000>;
>>> +		};
>>>   	};
>>
>> opp-microvolt has the same value for every node vs. table below?
> 
> On page 1 of the schematic for the rock64
> https://files.pine64.org/doc/rock64/ROCK64_Schematic_v3.0_20181105.pdf is a
> table ("Power Timing") showing BUCK1 at 1.1V. I interpreted this to mean that
> VDD_LOG should always be at 1.1V, regardless of frequency.

No, that's just the default voltage that BUCK1 itself starts up at - 
looks like that table is an unfinished attempt to summarise the Power 
Sequence section from the RK805 datasheet.

>> See also previous discussion:
>>
>> https://lore.kernel.org/linux-rockchip/3c95c29b-6c07-5945-ac22-d683997e1ca0@arm.com/
>>
>> Is that now fixed/checked?
> 
> I wasn't aware of the previous/on-going discussion regarding a gpu opp table
> for this SoC. Perhaps that explains my suspicions? I couldn't help wonder why
> the frequency is always reported as 163840000 even when I have an opp table
> that only has the 500MHz entry?

FWIW the usual culprit for clocks not changing is inadvertently not 
having devfreq and/or the simple_ondemand governor enabled. However, I 
do seem to recall that devfreq doesn't explicitly fix up an out-of-spec 
clock to a known OPP on startup like cpufreq does - I think it only 
actually touches the clocks and regulators when transitioning between 
OPPs, so if it only has one it might possibly end up in a pathological 
state where that effectively never happens; I don't remember exactly. 
Unfortunately all my boards are out of action for various reasons at the 
moment so I can't readily check how I was running mine, but from memory 
I think I ended up with slightly tweaked voltages based on a survey of 
several other BSP kernels, and the 200-300MHz points just disabled to 
avoid undervolting the memory controller once lima voltage scaling was 
working properly.

Cheers,
Robin.

> 
> I'll investigate whether I can prove or disprove the scaling is actually
> occurring?
> 
> Best regards,
> 	Trevor
>