linux-kernel - Re: [PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and name properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YW3IdoS+zHa4x70Z@robh.at.kernel.org>
Date:   Mon, 18 Oct 2021 14:18:14 -0500
From:   Rob Herring <robh@...nel.org>
To:     Richard Zhu <hongxing.zhu@....com>
Cc:     l.stach@...gutronix.de, tharvey@...eworks.com, kishon@...com,
        vkoul@...nel.org, galak@...nel.crashing.org, shawnguo@...nel.org,
        linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        kernel@...gutronix.de, linux-imx@....com
Subject: Re: [PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and
 name properties

On Tue, Oct 12, 2021 at 04:41:15PM +0800, Richard Zhu wrote:
> i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties
> in the binding document.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> ---
>  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> index 2911e565b260..99d9863a69cd 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> @@ -128,6 +128,12 @@ properties:
>      enum: [1, 2, 3, 4]
>      default: 1
>  
> +  phys:
> +    description: Phandle of the Generic PHY to the PCIe PHY.

maxItems: 1

And drop 'description'

> +
> +  phy-names:
> +    const: pcie-phy
> +
>    reset-gpio:
>      description: Should specify the GPIO for controlling the PCI bus device
>        reset signal. It's not polarity aware and defaults to active-low reset
> -- 
> 2.25.1
> 
>