[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3d93b60ec30d43fbe906a96a33f86b8b98ee36f5.1634592181.git.objelf@gmail.com>
Date: Tue, 19 Oct 2021 05:30:17 +0800
From: <sean.wang@...iatek.com>
To: <marcel@...tmann.org>, <johan.hedberg@...il.com>
CC: <Mark-YW.Chen@...iatek.com>, <sean.wang@...iatek.com>,
<Soul.Huang@...iatek.com>, <YN.Chen@...iatek.com>,
<Leon.Yen@...iatek.com>, <Eric-SY.Chang@...iatek.com>,
<Deren.Wu@...iatek.com>, <km.lin@...iatek.com>,
<robin.chiu@...iatek.com>, <Eddie.Chen@...iatek.com>,
<ch.yeh@...iatek.com>, <posh.sun@...iatek.com>,
<ted.huang@...iatek.com>, <Eric.Liang@...iatek.com>,
<Stella.Chang@...iatek.com>, <Tom.Chou@...iatek.com>,
<steve.lee@...iatek.com>, <jsiuda@...gle.com>,
<frankgor@...gle.com>, <jemele@...gle.com>,
<abhishekpandit@...gle.com>, <michaelfsun@...gle.com>,
<mcchou@...omium.org>, <shawnku@...gle.com>,
<linux-bluetooth@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Mark-yw Chen <mark-yw.chen@...iatek.com>
Subject: [PATCH v2 06/10] Bluetooth: btmtksdio: update register CSDIOCSR operation
From: Sean Wang <sean.wang@...iatek.com>
That is a preliminary patch to introduce mt7921s support.
Update register CSDIOCSR operation that is suggested from the vendor
driver and is compatible to the all devices.
Co-developed-by: Mark-yw Chen <mark-yw.chen@...iatek.com>
Signed-off-by: Mark-yw Chen <mark-yw.chen@...iatek.com>
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
drivers/bluetooth/btmtksdio.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index f712b52e5797..3381c8844902 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -520,8 +520,12 @@ static int btmtksdio_open(struct hci_dev *hdev)
/* SDIO CMD 5 allows the SDIO device back to idle state an
* synchronous interrupt is supported in SDIO 4-bit mode
*/
- sdio_writel(bdev->func, SDIO_INT_CTL | SDIO_RE_INIT_EN,
- MTK_REG_CSDIOCSR, &err);
+ val = sdio_readl(bdev->func, MTK_REG_CSDIOCSR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ val |= SDIO_INT_CTL;
+ sdio_writel(bdev->func, val, MTK_REG_CSDIOCSR, &err);
if (err < 0)
goto err_release_irq;
--
2.25.1
Powered by blists - more mailing lists