[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211019194545.GA2393463@bhelgaas>
Date: Tue, 19 Oct 2021 14:45:45 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Maíra Canal <maira.canal@....br>
Cc: hongxing.zhu@....com, l.stach@...gutronix.de,
lorenzo.pieralisi@....com, robh@...nel.org, kw@...ux.com,
bhelgaas@...gle.com, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] pci-imx6: replacing legacy gpio interface for gpiod
[fixed "linux-pci@...r.kernel.org" in cc]
On Tue, Oct 19, 2021 at 12:26:53PM -0300, Maíra Canal wrote:
> Removing all dependencies of linux/gpio.h and linux/of_gpio.h and replacing
> it with linux/gpio/consumer.h
Run "git log --oneline drivers/pci/controller/dwc/pci-imx6.c" and make
your subject line match -- capitalization, sentence structure, etc.
Write commit log in imperative mood, i.e., "Remove" instead of
"Removing": https://chris.beams.io/posts/git-commit/
The commit log mentions the trivial part but omits the important part
(converting from gpio to gpiod model).
> Signed-off-by: Maíra Canal <maira.canal@....br>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++-----------------
> 1 file changed, 11 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 80fc98acf097..e5ee54e37d05 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -11,13 +11,12 @@
> #include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
> #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
> #include <linux/module.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_device.h>
> #include <linux/of_address.h>
> #include <linux/pci.h>
> @@ -63,7 +62,7 @@ struct imx6_pcie_drvdata {
>
> struct imx6_pcie {
> struct dw_pcie *pci;
> - int reset_gpio;
> + struct gpio_desc *reset_gpio;
> bool gpio_active_high;
> struct clk *pcie_bus;
> struct clk *pcie_phy;
> @@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> usleep_range(200, 500);
>
> /* Some boards don't have PCIe reset GPIO. */
> - if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> - gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> + if (imx6_pcie->reset_gpio) {
> + gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
> imx6_pcie->gpio_active_high);
> msleep(100);
> - gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> + gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
> !imx6_pcie->gpio_active_high);
> }
>
> @@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(pci->dbi_base);
>
> /* Fetch GPIOs */
> - imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
> imx6_pcie->gpio_active_high = of_property_read_bool(node,
> "reset-gpio-active-high");
> - if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> - imx6_pcie->gpio_active_high ?
> - GPIOF_OUT_INIT_HIGH :
> - GPIOF_OUT_INIT_LOW,
> - "PCIe reset");
> - if (ret) {
> - dev_err(dev, "unable to get reset gpio\n");
> - return ret;
> - }
> - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> - return imx6_pcie->reset_gpio;
> - }
> + imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> + imx6_pcie->gpio_active_high ? GPIOD_OUT_HIGH :
> + GPIOD_OUT_LOW);
> + if (IS_ERR(imx6_pcie->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio),
> + "unable to get reset gpio\n");
>
> /* Fetch clocks */
> imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
> --
> 2.31.1
>
Powered by blists - more mailing lists