| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFoOMvEW0o6=-_bYKhwUcbfeTD4qu-K2tfkdXiR0bErHsw@mail.gmail.com>
Date: Tue, 19 Oct 2021 13:40:16 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Dmitry Osipenko <digetx@...il.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Viresh Kumar <vireshk@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Peter De Schrijver <pdeschrijver@...dia.com>,
Mikko Perttunen <mperttunen@...dia.com>,
Peter Chen <peter.chen@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Nishanth Menon <nm@...com>,
Adrian Hunter <adrian.hunter@...el.com>,
Michael Turquette <mturquette@...libre.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-tegra <linux-tegra@...r.kernel.org>,
Linux PM <linux-pm@...r.kernel.org>,
Linux USB List <linux-usb@...r.kernel.org>,
linux-staging@...ts.linux.dev, linux-pwm@...r.kernel.org,
linux-mmc <linux-mmc@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
DTML <devicetree@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
Mark Brown <broonie@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Richard Weinberger <richard@....at>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Lucas Stach <dev@...xeye.de>, Stefan Agner <stefan@...er.ch>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
David Heidelberg <david@...t.cz>
Subject: Re: [PATCH v13 20/35] mtd: rawnand: tegra: Add runtime PM and OPP support
On Sun, 17 Oct 2021 at 10:38, Dmitry Osipenko <digetx@...il.com> wrote:
>
> 01.10.2021 18:01, Ulf Hansson пишет:
> > On Fri, 1 Oct 2021 at 16:35, Dmitry Osipenko <digetx@...il.com> wrote:
> >>
> >> 01.10.2021 17:24, Ulf Hansson пишет:
> >>> On Mon, 27 Sept 2021 at 00:42, Dmitry Osipenko <digetx@...il.com> wrote:
> >>>>
> >>>> The NAND on Tegra belongs to the core power domain and we're going to
> >>>> enable GENPD support for the core domain. Now NAND must be resumed using
> >>>> runtime PM API in order to initialize the NAND power state. Add runtime PM
> >>>> and OPP support to the NAND driver.
> >>>>
> >>>> Acked-by: Miquel Raynal <miquel.raynal@...tlin.com>
> >>>> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> >>>> ---
> >>>> drivers/mtd/nand/raw/tegra_nand.c | 55 ++++++++++++++++++++++++++-----
> >>>> 1 file changed, 47 insertions(+), 8 deletions(-)
> >>>>
> >>>> diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
> >>>> index 32431bbe69b8..098fcc9cb9df 100644
> >>>> --- a/drivers/mtd/nand/raw/tegra_nand.c
> >>>> +++ b/drivers/mtd/nand/raw/tegra_nand.c
> >>>> @@ -17,8 +17,11 @@
> >>>> #include <linux/mtd/rawnand.h>
> >>>> #include <linux/of.h>
> >>>> #include <linux/platform_device.h>
> >>>> +#include <linux/pm_runtime.h>
> >>>> #include <linux/reset.h>
> >>>>
> >>>> +#include <soc/tegra/common.h>
> >>>> +
> >>>> #define COMMAND 0x00
> >>>> #define COMMAND_GO BIT(31)
> >>>> #define COMMAND_CLE BIT(30)
> >>>> @@ -1151,6 +1154,7 @@ static int tegra_nand_probe(struct platform_device *pdev)
> >>>> return -ENOMEM;
> >>>>
> >>>> ctrl->dev = &pdev->dev;
> >>>> + platform_set_drvdata(pdev, ctrl);
> >>>> nand_controller_init(&ctrl->controller);
> >>>> ctrl->controller.ops = &tegra_nand_controller_ops;
> >>>>
> >>>> @@ -1166,14 +1170,22 @@ static int tegra_nand_probe(struct platform_device *pdev)
> >>>> if (IS_ERR(ctrl->clk))
> >>>> return PTR_ERR(ctrl->clk);
> >>>>
> >>>> - err = clk_prepare_enable(ctrl->clk);
> >>>> + err = devm_pm_runtime_enable(&pdev->dev);
> >>>> + if (err)
> >>>> + return err;
> >>>> +
> >>>> + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
> >>>> + if (err)
> >>>> + return err;
> >>>> +
> >>>> + err = pm_runtime_resume_and_get(&pdev->dev);
> >>>> if (err)
> >>>> return err;
> >>>>
> >>>> err = reset_control_reset(rst);
> >>>> if (err) {
> >>>> dev_err(ctrl->dev, "Failed to reset HW: %d\n", err);
> >>>> - goto err_disable_clk;
> >>>> + goto err_put_pm;
> >>>> }
> >>>>
> >>>> writel_relaxed(HWSTATUS_CMD_DEFAULT, ctrl->regs + HWSTATUS_CMD);
> >>>> @@ -1188,21 +1200,19 @@ static int tegra_nand_probe(struct platform_device *pdev)
> >>>> dev_name(&pdev->dev), ctrl);
> >>>> if (err) {
> >>>> dev_err(ctrl->dev, "Failed to get IRQ: %d\n", err);
> >>>> - goto err_disable_clk;
> >>>> + goto err_put_pm;
> >>>> }
> >>>>
> >>>> writel_relaxed(DMA_MST_CTRL_IS_DONE, ctrl->regs + DMA_MST_CTRL);
> >>>>
> >>>> err = tegra_nand_chips_init(ctrl->dev, ctrl);
> >>>> if (err)
> >>>> - goto err_disable_clk;
> >>>> -
> >>>> - platform_set_drvdata(pdev, ctrl);
> >>>> + goto err_put_pm;
> >>>>
> >>>
> >>> There is no corresponding call pm_runtime_put() here. Is it
> >>> intentional to always leave the device runtime resumed after ->probe()
> >>> has succeeded?
> >>>
> >>> I noticed you included some comments about this for some other
> >>> drivers, as those needed more tweaks. Is that also the case for this
> >>> driver?
> >>
> >> Could you please clarify? There is pm_runtime_put() in both probe-error
> >> and remove() code paths here.
> >
> > I was not considering the error path of ->probe() (or ->remove()), but
> > was rather thinking about when ->probe() completes successfully. Then
> > you keep the device runtime resumed, because you have called
> > pm_runtime_resume_and_get() for it.
> >
> > Shouldn't you have a corresponding pm_runtime_put() in ->probe(),
> > allowing it to be runtime suspended, until the device is really needed
> > later on. No?
>
> This driver doesn't support active power management. I don't have Tegra
> hardware that uses NAND storage for testing, so it's up to somebody else
> to implement dynamic power management. NAND doesn't require high
> voltages, so it's fine to keep the old driver behaviour by keeping
> hardware resumed since the probe time.
Alright, fair enough and thanks for clarifying!
Kind regards
Uffe
Powered by blists - more mailing lists