linux-kernel - Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <39ca0c9102265d6e14f3e0da94fec40d@codeaurora.org>
Date:   Wed, 20 Oct 2021 12:00:52 +0800
From:   tjiang@...eaurora.org
To:     Matthias Kaehlcke <mka@...omium.org>
Cc:     marcel@...tmann.org, johan.hedberg@...il.com, luiz.dentz@...il.com,
        linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, bgodavar@...eaurora.org,
        c-hbandi@...eaurora.org, hemantg@...eaurora.org,
        rjliao@...eaurora.org, zijuhu@...eaurora.org
Subject: Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by
 using different nvm

Thanks Matthias for the comments. please see my comments inline .

BTW: marcel , do you agree with Matthias comments ? if fine , I will 
align Matthias comments and make the final version.

regards.
tim
On 2021-10-20 03:29, Matthias Kaehlcke wrote:
> On Tue, Oct 12, 2021 at 03:55:56PM +0800, tjiang@...eaurora.org wrote:
>> the RF performance of wcn6855 soc chip from different foundries will 
>> be
>> difference, so we should use different nvm to configure them.
>> 
>> Signed-off-by: Tim Jiang <tjiang@...eaurora.org>
>> ---
>>  drivers/bluetooth/btusb.c | 56
>> +++++++++++++++++++++++++++++++++++------------
>>  1 file changed, 42 insertions(+), 14 deletions(-)
>> 
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 75c83768c257..f352ff351b61 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct 
>> hci_dev
>> *hdev,
>>  #define QCA_DFU_TIMEOUT		3000
>>  #define QCA_FLAG_MULTI_NVM      0x80
>> 
>> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
>> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
>> +
>>  struct qca_version {
>>  	__le32	rom_version;
>>  	__le32	patch_version;
>> @@ -3221,6 +3224,7 @@ static const struct qca_device_info
>> qca_devices_table[] = {
>>  	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
>>  	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
>>  	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
>> +	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
>>  };
>> 
>>  static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 
>> request,
>> @@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
>> hci_dev *hdev,
>>  	return err;
>>  }
>> 
>> +static void btusb_generate_qca_nvm_name(char *fwname,
>> +					size_t max_size,
>> +					struct qca_version *ver)
> 
> => const struct qca_version *ver
> 
>> +{
>> +	u32 rom_version = le32_to_cpu(ver->rom_version);
>> +	u16 flag = le16_to_cpu(ver->flag);
>> +
>> +	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
>> +		u16 board_id = le16_to_cpu(ver->board_id);
>> +		u32 ram_version = le32_to_cpu(ver->ram_version);
>> +		const char *variant;
>> +
>> +		switch (ram_version) {
>> +		case WCN6855_2_0_RAM_VERSION_GF:
>> +		case WCN6855_2_1_RAM_VERSION_GF:
>> +			variant = "_gf";
>> +			break;
>> +		default:
>> +			variant = "";
> 
> instead of the default branch you could assign a default to 'variant' 
> at
> declaration time, but it's fine either way.

[Tim] this code style is recommend by marcel.

> 
>> +			break;
>> +		}
>> +
>> +		/* if boardid equal 0, use default nvm without suffix */
> 
> delete the comment, it just states the obvious
> 
>> +		if (board_id == 0x0) {
> 
> nit: is there really any value in using a hex number here instead of a
> plain decimal 0?

[Tim] this line is inherit from last change , if you think I should 
change 0x0 to 0 , I am fine.

> 
>> +			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
>> +				rom_version, variant);
>> +		} else {
>> +			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
>> +				rom_version, variant, board_id);
>> +		}
>> +	} else {
>> +		snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
>> +			rom_version);
>> +	}
>> +
>> +}
>> +
>>  static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
>>  				    struct qca_version *ver,
>>  				    const struct qca_device_info *info)
>> @@ -3383,20 +3424,7 @@ static int btusb_setup_qca_load_nvm(struct 
>> hci_dev
>> *hdev,
>>  	char fwname[64];
>>  	int err;
>> 
>> -	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
>> -		/* if boardid equal 0, use default nvm without surfix */
>> -		if (le16_to_cpu(ver->board_id) == 0x0) {
>> -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
>> -				 le32_to_cpu(ver->rom_version));
>> -		} else {
>> -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
>> -				le32_to_cpu(ver->rom_version),
>> -				le16_to_cpu(ver->board_id));
>> -		}
>> -	} else {
>> -		snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
>> -			 le32_to_cpu(ver->rom_version));
>> -	}
>> +	btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
>> 
>>  	err = request_firmware(&fw, fwname, &hdev->dev);
>>  	if (err) {