[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211020184859.2705451-1-f.fainelli@gmail.com>
Date: Wed, 20 Oct 2021 11:48:46 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM
BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
Russell King <linux@...linux.org.uk>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
linux-arm-kernel@...ts.infradead.org (moderated list:ARM
SUB-ARCHITECTURES), linux-mips@...r.kernel.org (open list:MIPS),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE)
Subject: [PATCH v6 00/13] Modular Broadcom irqchip drivers
Hi Thomas, Marc,
This patch series aims at allowing the 3 interrupt controller drivers
used on Broadcom STB platforms to be built as modules in order for those
to be shipped in a GKI enabled system (Android).
The irq-bcm7038-l1 requires us to export a number of symbols, which is
not great, but there are not obvious solutions other than adding
accessor functions to get the same information.
Assuming you are happy with the changes though, please do take the last
two changes as well through your tree.
Thanks!
Changes in v6:
- dropped changing the prototype of of_init_irq_cb and instead
resolved the platform_device from irq-bcm7120-l2 since this is
the only driver that needs this to call platform_irq_count()
Changes in v5:
- put patch #9 as the first one
- add missing platform_device argument to the irq-bcm7038-l1 and
irq-brcmstb-l2 drivers (Marc)
Changes in v4:
- added Thomas' Acked-by for patch #1
- added Rob's Reviewed-by for patch 9 and updated qcom-pdc.c as
suggested
- s/argument/parameter/ in patch #14 as suggested by Sergey
Changes in v3:
- avoid the use of the cpu_logical_map array for platforms other than
MIPS
- removed the bogus irq_set_affinity callback for platforms other than
MIPS
- bring-back the export of irq_gc_noop() lost in the v2
Changes in v2:
- avoid using irq_to_desc() and use irq_get_irq_data() instead
- re-order patches to avoid linking failure for irq-brcmstb-l2
- removed the use of .irq_cpu_offline() and converted BMIPS to use
irq_migrate_all_off_this_cpu()
- avoid exporting of_irq_count() and use a platform device passed
down from the irqchip platform driver registration code instead
- added kernel-doc fix
Florian Fainelli (13):
MIPS: BMIPS: Remove use of irq_cpu_offline
irqchip/irq-bcm7038-l1: Remove .irq_cpu_offline()
irqchip/irq-bcm7038-l1: Use irq_get_irq_data()
irqchip/irq-bcm7038-l1: Gate use of CPU logical map to MIPS
irqchip/irq-bcm7038-l1: Restrict affinity setting to MIPS
irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER
genirq: Export irq_gc_{unmask_enable,mask_disable}_reg
irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER
genirq: Export irq_gc_noop()
irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER
arm64: broadcom: Removed forced select of interrupt controllers
ARM: bcm: Removed forced select of interrupt controllers
irqchip: Fix kernel-doc parameter typo for IRQCHIP_DECLARE
arch/arm/mach-bcm/Kconfig | 4 ---
arch/arm64/Kconfig.platforms | 3 --
arch/mips/Kconfig | 1 +
arch/mips/kernel/smp-bmips.c | 3 +-
drivers/irqchip/Kconfig | 12 ++++++--
drivers/irqchip/irq-bcm7038-l1.c | 47 ++++++++------------------------
drivers/irqchip/irq-bcm7120-l2.c | 21 ++++++++++----
drivers/irqchip/irq-brcmstb-l2.c | 16 ++++++-----
include/linux/irqchip.h | 2 +-
kernel/irq/generic-chip.c | 3 ++
10 files changed, 51 insertions(+), 61 deletions(-)
--
2.25.1
Powered by blists - more mailing lists