| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <62496b13-bd5b-6a4c-d426-bf332d0335c4@aspeedtech.com>
Date: Wed, 20 Oct 2021 16:08:56 +0800
From: Jammy Huang <jammy_huang@...eedtech.com>
To: Paul Menzel <pmenzel@...gen.mpg.de>
CC: "eajames@...ux.ibm.com" <eajames@...ux.ibm.com>,
"mchehab@...nel.org" <mchehab@...nel.org>,
"joel@....id.au" <joel@....id.au>,
"andrew@...id.au" <andrew@...id.au>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"openbmc@...ts.ozlabs.org" <openbmc@...ts.ozlabs.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/7] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg
for log
Dear Paul,
On 2021/10/18 下午 05:58, Paul Menzel wrote:
> Dear Jammy,
>
>
> Am 18.10.21 um 11:22 schrieb Jammy Huang:
>> The debug log level, 0~3, is controlled by module_param, debug.
>> Higher the value, more the information.
> Nit: *The* higher …
>
> Please mention your “conversion heuristic”? For example, level 3 is for
> register operations (read, update, write)? Maybe that could also be
> added to the module parameter description.
OK, it will be updated as below:
The debug log level, 0~3, is controlled by module_param, debug.
The higher the value, the more the information.
0: off
1: info
2: debug
3: register operations
>
>
> Kind regards,
>
> Paul
>
>
>> Signed-off-by: Jammy Huang <jammy_huang@...eedtech.com>
>> ---
>> drivers/media/platform/aspeed-video.c | 40 +++++++++++++++------------
>> 1 file changed, 23 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> index 6259cf17a7cc..642ca96c8c52 100644
>> --- a/drivers/media/platform/aspeed-video.c
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -30,6 +30,7 @@
>> #include <media/v4l2-event.h>
>> #include <media/v4l2-ioctl.h>
>> #include <media/videobuf2-dma-contig.h>
>> +#include <linux/videodev2.h>
>>
>> #define DEVICE_NAME "aspeed-video"
>>
>> @@ -390,6 +391,8 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
>> },
>> };
>>
>> +static unsigned int debug;
>> +
>> static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
>> {
>> int i;
>> @@ -437,23 +440,23 @@ static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
>> t &= ~clear;
>> t |= bits;
>> writel(t, video->base + reg);
>> - dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
>> - readl(video->base + reg));
>> + v4l2_dbg(3, debug, &video->v4l2_dev, "update %03x[%08x -> %08x]\n",
>> + reg, before, readl(video->base + reg));
>> }
>>
>> static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
>> {
>> u32 t = readl(video->base + reg);
>>
>> - dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
>> + v4l2_dbg(3, debug, &video->v4l2_dev, "read %03x[%08x]\n", reg, t);
>> return t;
>> }
>>
>> static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
>> {
>> writel(val, video->base + reg);
>> - dev_dbg(video->dev, "write %03x[%08x]\n", reg,
>> - readl(video->base + reg));
>> + v4l2_dbg(3, debug, &video->v4l2_dev, "write %03x[%08x]\n", reg,
>> + readl(video->base + reg));
>> }
>>
>> static void update_perf(struct aspeed_video_perf *p)
>> @@ -474,13 +477,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
>> u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
>>
>> if (video->v4l2_input_status) {
>> - dev_dbg(video->dev, "No signal; don't start frame\n");
>> + v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n");
>> return 0;
>> }
>>
>> if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
>> !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
>> - dev_dbg(video->dev, "Engine busy; don't start frame\n");
>> + v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n");
>> return -EBUSY;
>> }
>>
>> @@ -489,7 +492,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
>> struct aspeed_video_buffer, link);
>> if (!buf) {
>> spin_unlock_irqrestore(&video->lock, flags);
>> - dev_dbg(video->dev, "No buffers; don't start frame\n");
>> + v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n");
>> return -EPROTO;
>> }
>>
>> @@ -565,7 +568,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
>>
>> static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
>> {
>> - dev_dbg(video->dev, "Resolution changed; resetting\n");
>> + v4l2_dbg(1, debug, &video->v4l2_dev, "Resolution changed; resetting\n");
>>
>> set_bit(VIDEO_RES_CHANGE, &video->flags);
>> clear_bit(VIDEO_FRAME_INPRG, &video->flags);
>> @@ -766,8 +769,8 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
>> aspeed_video_write(video, VE_STREAM_BUF_SIZE,
>> compression_buffer_size_reg);
>>
>> - dev_dbg(video->dev, "Max compressed size: %x\n",
>> - video->max_compressed_size);
>> + v4l2_dbg(1, debug, &video->v4l2_dev, "Max compressed size: %#x\n",
>> + video->max_compressed_size);
>> }
>>
>> #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
>> @@ -804,7 +807,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>> res_check(video),
>> MODE_DETECT_TIMEOUT);
>> if (!rc) {
>> - dev_dbg(video->dev, "Timed out; first mode detect\n");
>> + v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n");
>> clear_bit(VIDEO_RES_DETECT, &video->flags);
>> return;
>> }
>> @@ -822,7 +825,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>> MODE_DETECT_TIMEOUT);
>> clear_bit(VIDEO_RES_DETECT, &video->flags);
>> if (!rc) {
>> - dev_dbg(video->dev, "Timed out; second mode detect\n");
>> + v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n");
>> return;
>> }
>>
>> @@ -856,7 +859,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>> } while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
>>
>> if (invalid_resolution) {
>> - dev_dbg(video->dev, "Invalid resolution detected\n");
>> + v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n");
>> return;
>> }
>>
>> @@ -873,8 +876,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>> aspeed_video_update(video, VE_SEQ_CTRL, 0,
>> VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
>>
>> - dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
>> - det->height);
>> + v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
>> + det->width, det->height);
>> }
>>
>> static void aspeed_video_set_resolution(struct aspeed_video *video)
>> @@ -1501,7 +1504,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
>> !test_bit(VIDEO_FRAME_INPRG, &video->flags),
>> STOP_TIMEOUT);
>> if (!rc) {
>> - dev_dbg(video->dev, "Timed out when stopping streaming\n");
>> + v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n");
>>
>> /*
>> * Need to force stop any DMA and try and get HW into a good
>> @@ -1856,6 +1859,9 @@ static struct platform_driver aspeed_video_driver = {
>>
>> module_platform_driver(aspeed_video_driver);
>>
>> +module_param(debug, int, 0644);
>> +MODULE_PARM_DESC(debug, "Debug level (0-3)");
>> +
>> MODULE_DESCRIPTION("ASPEED Video Engine Driver");
>> MODULE_AUTHOR("Eddie James");
>> MODULE_LICENSE("GPL v2");
>>
Powered by blists - more mailing lists