linux-kernel - Re: [PATCH v3 00/10] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YXA+GoTf6u/Y4qLX@google.com>
Date:   Wed, 20 Oct 2021 17:04:42 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Cc:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Sylwester Nawrocki <s.nawrocki@...sung.com>,
        Tomasz Figa <tomasz.figa@...il.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH v3 00/10] regulator/mfd/clock: dt-bindings: Samsung S2M
 and S5M to dtschema

On Wed, 06 Oct 2021, Krzysztof Kozlowski wrote:

> Hi All,
> 
> Changes since v2
> ================
> 1. Add Rob's tags.
> 2. Remove "regulator-name" from properties (all regulator dtschema).
> 3. Move "unevaluatedProperties" higher to make code easier to read (all regulator dtschema).
> 4. Add ref-type to op-mode property (patch 6: s5m8767 regulators).
> 
> Changes since v1
> ================
> 1. Drop DTS patches - applied.
> 2. Fully remove bindings/regulator/samsung,s5m8767.txt .
> 3. Minor subject reformatting and few typos in text.
> 
> 
> Intro
> =====
> This patchset converts all devicetree bindings of Samsung S2M and S5M
> PMIC devices from txt to dtschema.
> 
> It includes also two fixes because later conversion depends on it
> (contextually).
> 
> 
> Merging/dependencies
> ====================
> 1. Regulator related binding changes depend on first two commits (the
>    fixes), because of context.
> 2. The mfd bindings depend on clock and regulator bindings.
> 
> The fixes and bindings changes (patches 1-10) should go via the same
> tree.  For example regulator or mfd tree.
> 
> Another alternative is that regulator patches (1-2, 4-6) go via Mark who
> later gives MFD a stable branch/tag to pull. Then the clock and MFD
> bindings would go on top via MFD tree. Or any other setup you would like
> to have. :)
> 
> 
> Overview of devices
> ===================
> Essentially all Samsung S2M and S5M PMICs are very similar devices. They
> provide the same functionality: regulators, RTC, 2 or 3 clocks and main
> power management (e.g. power cut to SoC).
> 
> The differences are mostly in registers layout and number of regulators.
> 
> The drivers are built around one common part, mfd/sec-core.c, and share
> some drivers between devices:
> 1. MFD sec-core for all devices,
> 1. one clock driver for most of devices,
> 2. one RTC driver for all devices,
> 3. three regulator drivers.
> 
> The regulator drivers were implementing slightly different features,
> therefore one regulator binding for all devices does not make much
> sense.  However the clock device binding can be shared.
> 
> The final dtschema bindings try to implement this - share only the clock
> bindings.
> 
> Best regards,
> Krzysztof
> 
> Krzysztof Kozlowski (10):
>   regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS
>     is disabled
>   regulator: dt-bindings: samsung,s5m8767: correct
>     s5m8767,pmic-buck-default-dvs-idx property
>   dt-bindings: clock: samsung,s2mps11: convert to dtschema
>   regulator: dt-bindings: samsung,s2m: convert to dtschema
>   regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
>   regulator: dt-bindings: samsung,s5m8767: convert to dtschema
>   dt-bindings: mfd: samsung,s2mps11: convert to dtschema
>   dt-bindings: mfd: samsung,s2mpa01: convert to dtschema
>   dt-bindings: mfd: samsung,s5m8767: convert to dtschema
>   dt-bindings: mfd: samsung,s5m8767: document buck and LDO supplies

Looks like these are ready to be pushed.

However, I am not in receipt of patches 1-2.

Am I okay to merge 3-10 right now?

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog