[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f91c4f16-fd81-5d70-0146-e9aa2d128da9@cogentembedded.com>
Date: Wed, 20 Oct 2021 20:45:50 +0300
From: Nikita Yushchenko <nikita.yoush@...entembedded.com>
To: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-media@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Koji Matsuoka <koji.matsuoka.xm@...esas.com>
Subject: Re: [PATCH] media: vsp1: mask interrupts before enabling
Hi,
> Could you test to see if those lines to explicitly set VI6_DISP_IRQ_ENB
> and VI6_WPF_IRQ_ENB are really needed in your use case please?
Commenting out those register writes causes
[ 2.275137][ C0] irq 188: nobody cared (try booting with the "irqpoll" option)
[ 2.282621][ C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc5 #28
[ 2.289669][ C0] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
[ 2.297844][ C0] Call trace:
[ 2.300981][ C0] dump_backtrace+0x0/0x198
[ 2.305348][ C0] show_stack+0x1c/0x28
[ 2.309357][ C0] dump_stack_lvl+0x64/0x7c
[ 2.313718][ C0] dump_stack+0x14/0x2c
[ 2.317725][ C0] __report_bad_irq+0x50/0xdc
[ 2.322254][ C0] note_interrupt+0x2e4/0x330
[ 2.326786][ C0] handle_irq_event_percpu+0x58/0x68
[ 2.331927][ C0] handle_irq_event+0x4c/0x98
[ 2.336456][ C0] handle_fasteoi_irq+0xd0/0x180
[ 2.341245][ C0] handle_domain_irq+0x94/0xd8
[ 2.345862][ C0] gic_handle_irq+0xa4/0xe0
[ 2.350216][ C0] do_interrupt_handler+0x38/0x60
[ 2.355093][ C0] el1_interrupt+0x2c/0x68
[ 2.359362][ C0] el1h_64_irq_handler+0x14/0x20
[ 2.364151][ C0] el1h_64_irq+0x74/0x78
[ 2.368244][ C0] __do_softirq+0xc8/0x404
[ 2.372511][ C0] irq_exit+0x118/0x140
[ 2.376521][ C0] handle_domain_irq+0x98/0xd8
[ 2.381137][ C0] gic_handle_irq+0xa4/0xe0
[ 2.385490][ C0] call_on_irq_stack+0x28/0x3c
[ 2.390105][ C0] do_interrupt_handler+0x54/0x60
[ 2.394981][ C0] el1_interrupt+0x2c/0x68
[ 2.399247][ C0] el1h_64_irq_handler+0x14/0x20
[ 2.404036][ C0] el1h_64_irq+0x74/0x78
[ 2.408129][ C0] _raw_spin_unlock_irqrestore+0x20/0x50
[ 2.413615][ C0] __setup_irq+0x56c/0x888
[ 2.417882][ C0] request_threaded_irq+0xf0/0x1a8
[ 2.422843][ C0] devm_request_threaded_irq+0x84/0xf8
[ 2.428155][ C0] vsp1_probe+0x218/0xb48
[ 2.432340][ C0] platform_probe+0x6c/0xd8
[ 2.436700][ C0] really_probe+0xc0/0x428
[ 2.440967][ C0] __driver_probe_device+0x114/0x188
[ 2.446103][ C0] driver_probe_device+0x44/0xe8
[ 2.450891][ C0] __driver_attach+0xbc/0x1a0
[ 2.455419][ C0] bus_for_each_dev+0x64/0xa0
[ 2.459947][ C0] driver_attach+0x28/0x30
[ 2.464215][ C0] bus_add_driver+0x144/0x228
[ 2.468743][ C0] driver_register+0x68/0x118
[ 2.473272][ C0] __platform_driver_register+0x2c/0x38
[ 2.478669][ C0] vsp1_platform_driver_init+0x20/0x28
[ 2.483985][ C0] do_one_initcall+0x38/0x258
[ 2.488513][ C0] kernel_init_freeable+0x228/0x28c
[ 2.493565][ C0] kernel_init+0x28/0x120
[ 2.497745][ C0] ret_from_fork+0x10/0x20
[ 2.502013][ C0] handlers:
[ 2.504974][ C0] [<0000000040be598b>] vsp1_irq_handler
[ 2.510376][ C0] Disabling IRQ #188
Nikita
Powered by blists - more mailing lists