| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211021070924.18626-2-mihail.chindris@analog.com>
Date: Thu, 21 Oct 2021 07:09:25 +0000
From: Mihail Chindris <mihail.chindris@...log.com>
To: <linux-kernel@...r.kernel.org>, <linux-iio@...r.kernel.org>
CC: <lars@...afoo.de>, <Michael.Hennerich@...log.com>,
<jic23@...nel.org>, <nuno.sa@...log.com>,
<dragos.bogdan@...log.com>, <alexandru.ardelean@...log.com>,
Mihail Chindris <mihail.chindris@...log.com>,
<robh+dt@...nel.org>, <broonie@...nel.org>
Subject: [PATCH v3 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
Add documentation for ad3552r
Signed-off-by: Mihail Chindris <mihail.chindris@...log.com>
---
.../bindings/iio/dac/adi,ad3552r.yaml | 190 ++++++++++++++++++
1 file changed, 190 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 000000000000..c6999bb4c7a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+ - Mihail Chindris <mihail.chindris@...log.com>
+
+description: |
+ Bindings for the Analog Devices AD3552R DAC device and similar.
+ Datasheet can be found here:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+properties:
+ compatible:
+ enum:
+ - adi,ad3542r
+ - adi,ad3552r
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 30000000
+
+ reset-gpios:
+ maxItems: 1
+
+ ldac-gpios:
+ description: |
+ LDAC pin to be used as a hardware trigger to update the DAC channels.
+ maxItems: 1
+
+ vref-supply:
+ description:
+ The regulator to use as an external reference. If it does not exists the
+ internal reference will be used. External reference must be 2.5V
+
+ adi,vref-out-en:
+ description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+ will be floating.
+ type: boolean
+
+ adi,sdo-drive-strength:
+ description: |
+ Configure SDIO0 and SDIO1 strength levels:
+ - 0: low SDO drive strength.
+ - 1: medium low SDO drive strength.
+ - 2: medium high SDO drive strength.
+ - 3: high SDO drive strength
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+patternProperties:
+ "^channel@([0-1])$":
+ type: object
+ description: Configurations of the DAC Channels
+ properties:
+ reg:
+ description: Channel number
+ enum: [0, 1]
+
+ custom-output-range-config:
+ type: object
+ description: Configuration of custom range when
+ adi,output-range-microvolt is not present.
+ The formulas for calculation the output voltages are
+ Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+ Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+ properties:
+ adi,gain-offset:
+ description: Gain offset used in the above formula
+ $ref: /schemas/types.yaml#/definitions/int32
+ maximum: 511
+ minimum: -511
+ adi,gain-scaling-p-inv-log2:
+ description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ adi,gain-scaling-n-inv-log2:
+ description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ adi,rfb-ohms:
+ description: Feedback Resistor
+ required:
+ - adi,gain-offset
+ - adi,gain-scaling-p-inv-log2
+ - adi,gain-scaling-n-inv-log2
+ - adi,rfb-ohms
+ required:
+ - reg
+
+ oneOf:
+ # If adi,output-range-microvolt is missing,
+ # custom-output-range-config must be used
+ - required:
+ - adi,output-range-microvolt
+ - required:
+ - custom-output-range-config
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,ad3542r
+ then:
+ patternProperties:
+ "^channel@([0-1])$":
+ type: object
+ properties:
+ adi,output-range-microvolt:
+ description: |
+ Voltage output range of the channel as <minimum, maximum>
+ Required connections:
+ Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+ Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+ oneOf:
+ - items:
+ - const: 0
+ - enum: [2500000, 3000000, 5000000, 10000000]
+ - items:
+ - const: -2500000
+ - const: 7500000
+ - items:
+ - const: -5000000
+ - const: 5000000
+ required:
+ - adi,output-range-microvolt
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,ad3552r
+ then:
+ patternProperties:
+ "^channel@([0-1])$":
+ type: object
+ properties:
+ adi,output-range-microvolt:
+ description: |
+ Voltage output range of the channel as <minimum, maximum>
+ Required connections:
+ Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+ Rfb2x for: 0 to 10 V; -5 to 5 V;
+ Rfb4x for: -10 to 10V
+ oneOf:
+ - items:
+ - const: 0
+ - enum: [2500000, 5000000, 10000000]
+ - items:
+ - const: -5000000
+ - const: 5000000
+ - items:
+ - const: -10000000
+ - const: 10000000
+
+required:
+ - compatible
+ - reg
+ - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ ad3552r {
+ compatible = "adi,ad3552r";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ channel@0 {
+ reg = <0>;
+ adi,output-range-microvolt = <0 10000000>;
+ };
+ channel@1 {
+ reg = <1>;
+ custom-output-range-config {
+ adi,gain-offset = <5>;
+ adi,gain-scaling-p-inv-log2 = <1>;
+ adi,gain-scaling-n-inv-log2 = <2>;
+ adi,rfb-ohms = <1>;
+ };
+ };
+ };
+...
--
2.27.0
Powered by blists - more mailing lists