lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 21 Oct 2021 20:37:43 +0530
From:   Naveen Naidu <naveennaidu479@...il.com>
To:     bhelgaas@...gle.com
Cc:     Naveen Naidu <naveennaidu479@...il.com>,
        linux-kernel-mentees@...ts.linuxfoundation.org,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        skhan@...uxfoundation.org, Lukas Wunner <lukas@...ner.de>,
        Kuppuswamy Sathyanarayanan 
        <sathyanarayanan.kuppuswamy@...ux.intel.com>,
        Amey Narkhede <ameynarkhede03@...il.com>
Subject: [PATCH v3 18/25] PCI: pciehp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware

An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use RESPONSE_IS_PCI_ERROR() to check the response we get when we read
data from hardware.

This helps unify PCI error response checking and make error checks
consistent and easier to find.

Compile tested only.

Signed-off-by: Naveen Naidu <naveennaidu479@...il.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 3024d7e85e6a..f472f83f6cce 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -89,7 +89,7 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
 
 	do {
 		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-		if (slot_status == (u16) ~0) {
+		if (RESPONSE_IS_PCI_ERROR(slot_status)) {
 			ctrl_info(ctrl, "%s: no response from device\n",
 				  __func__);
 			return 0;
@@ -165,7 +165,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 	pcie_wait_cmd(ctrl);
 
 	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
-	if (slot_ctrl == (u16) ~0) {
+	if (RESPONSE_IS_PCI_ERROR(slot_ctrl)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		goto out;
 	}
@@ -236,7 +236,7 @@ int pciehp_check_link_active(struct controller *ctrl)
 	int ret;
 
 	ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0)
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || RESPONSE_IS_PCI_ERROR(lnk_status))
 		return -ENODEV;
 
 	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
@@ -443,7 +443,7 @@ int pciehp_card_present(struct controller *ctrl)
 	int ret;
 
 	ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-	if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0)
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || RESPONSE_IS_PCI_ERROR(slot_status))
 		return -ENODEV;
 
 	return !!(slot_status & PCI_EXP_SLTSTA_PDS);
@@ -621,7 +621,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 
 read_status:
 	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
-	if (status == (u16) ~0) {
+	if (RESPONSE_IS_PCI_ERROR(status)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		if (parent)
 			pm_runtime_put(parent);
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ