lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1634929505-16205-1-git-send-email-sgoutham@marvell.com>
Date:   Sat, 23 Oct 2021 00:35:05 +0530
From:   Sunil Goutham <sgoutham@...vell.com>
To:     <herbert@...dor.apana.org.au>, <linux-crypto@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     Sunil Goutham <sgoutham@...vell.com>
Subject: [PATCH] hwrng: cavium: Check health status while reading random data

This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.

HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.

This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
   10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
   error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
   current cycles with the ones since last failure. cycles or time since
   last failure is calculated using cycles and time info captured at (2).

HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.

Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
 drivers/char/hw_random/cavium-rng-vf.c | 194 +++++++++++++++++++++++++++++++--
 drivers/char/hw_random/cavium-rng.c    |  11 +-
 2 files changed, 189 insertions(+), 16 deletions(-)

diff --git a/drivers/char/hw_random/cavium-rng-vf.c b/drivers/char/hw_random/cavium-rng-vf.c
index 3de4a6a..6f66919 100644
--- a/drivers/char/hw_random/cavium-rng-vf.c
+++ b/drivers/char/hw_random/cavium-rng-vf.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Hardware Random Number Generator support for Cavium, Inc.
- * Thunder processor family.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Hardware Random Number Generator support.
+ * Cavium Thunder, Marvell OcteonTx/Tx2 processor families.
  *
  * Copyright (C) 2016 Cavium, Inc.
  */
@@ -15,16 +12,146 @@
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 
+#include <asm/arch_timer.h>
+
+/* PCI device IDs */
+#define	PCI_DEVID_CAVIUM_RNG_PF		0xA018
+#define	PCI_DEVID_CAVIUM_RNG_VF		0xA033
+
+#define HEALTH_STATUS_REG		0x38
+
+/* RST device info */
+#define PCI_DEVICE_ID_RST_OTX2		0xA085
+#define RST_BOOT_REG			0x1600ULL
+#define CLOCK_BASE_RATE			50000000ULL
+#define MSEC_TO_NSEC(x)			(x * 1000000)
+
 struct cavium_rng {
 	struct hwrng ops;
 	void __iomem *result;
+	void __iomem *pf_regbase;
+	struct pci_dev *pdev;
+	u64  clock_rate;
+	u64  prev_error;
+	u64  prev_time;
 };
 
+static inline bool is_octeontx(struct pci_dev *pdev)
+{
+	if (midr_is_cpu_model_range(read_cpuid_id(), MIDR_THUNDERX_83XX,
+				    MIDR_CPU_VAR_REV(0, 0),
+				    MIDR_CPU_VAR_REV(3, 0)) ||
+	    midr_is_cpu_model_range(read_cpuid_id(), MIDR_THUNDERX_81XX,
+				    MIDR_CPU_VAR_REV(0, 0),
+				    MIDR_CPU_VAR_REV(3, 0)) ||
+	    midr_is_cpu_model_range(read_cpuid_id(), MIDR_THUNDERX,
+				    MIDR_CPU_VAR_REV(0, 0),
+				    MIDR_CPU_VAR_REV(3, 0)))
+		return true;
+
+	return false;
+}
+
+static u64 rng_get_coprocessor_clkrate(void)
+{
+	u64 ret = CLOCK_BASE_RATE * 16; /* Assume 800Mhz as default */
+	struct pci_dev *pdev;
+	void __iomem *base;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
+			      PCI_DEVICE_ID_RST_OTX2, NULL);
+	if (!pdev)
+		goto error;
+
+	base = pci_ioremap_bar(pdev, 0);
+	if (!base)
+		goto error_put_pdev;
+
+	/* RST: PNR_MUL * 50Mhz gives clockrate */
+	ret = CLOCK_BASE_RATE * ((readq(base + RST_BOOT_REG) >> 33) & 0x3F);
+
+	iounmap(base);
+
+error_put_pdev:
+	pci_dev_put(pdev);
+
+error:
+	return ret;
+}
+
+static int check_rng_health(struct cavium_rng *rng)
+{
+	u64 cur_err, cur_time;
+	u64 status, cycles;
+	u64 time_elapsed;
+
+
+	/* Skip checking health for OcteonTx */
+	if (!rng->pf_regbase)
+		return 0;
+
+	status = readq(rng->pf_regbase + HEALTH_STATUS_REG);
+	if (status & BIT_ULL(0)) {
+		dev_err(&rng->pdev->dev, "HWRNG: Startup health test failed\n");
+		return -EIO;
+	}
+
+	cycles = status >> 1;
+	if (!cycles)
+		return 0;
+
+	cur_time = arch_timer_read_counter();
+
+	/* RNM_HEALTH_STATUS[CYCLES_SINCE_HEALTH_FAILURE]
+	 * Number of coprocessor cycles times 2 since the last failure.
+	 * This field doesn't get cleared/updated until another failure.
+	 */
+	cycles = cycles / 2;
+	cur_err = (cycles * 1000000000) / rng->clock_rate; /* In nanosec */
+
+	/* Ignore errors that happenned a long time ago, these
+	 * are most likely false positive errors.
+	 */
+	if (cur_err > MSEC_TO_NSEC(10)) {
+		rng->prev_error = 0;
+		rng->prev_time = 0;
+		return 0;
+	}
+
+	if (rng->prev_error) {
+		/* Calculate time elapsed since last error
+		 * '1' tick of CNTVCT is 10ns, since it runs at 100Mhz.
+		 */
+		time_elapsed = (cur_time - rng->prev_time) * 10;
+		time_elapsed += rng->prev_error;
+
+		/* Check if current error is a new one or the old one itself.
+		 * If error is a new one then consider there is a persistent
+		 * issue with entropy, declare hardware failure.
+		 */
+		if (cur_err < time_elapsed) {
+			dev_err(&rng->pdev->dev, "HWRNG failure detected\n");
+			rng->prev_error = cur_err;
+			rng->prev_time = cur_time;
+			return -EIO;
+		}
+	}
+
+	rng->prev_error = cur_err;
+	rng->prev_time = cur_time;
+	return 0;
+}
+
 /* Read data from the RNG unit */
 static int cavium_rng_read(struct hwrng *rng, void *dat, size_t max, bool wait)
 {
 	struct cavium_rng *p = container_of(rng, struct cavium_rng, ops);
 	unsigned int size = max;
+	int err = 0;
+
+	err = check_rng_health(p);
+	if (err)
+		return err;
 
 	while (size >= 8) {
 		*((u64 *)dat) = readq(p->result);
@@ -39,6 +166,39 @@ static int cavium_rng_read(struct hwrng *rng, void *dat, size_t max, bool wait)
 	return max;
 }
 
+static int cavium_map_pf_regs(struct cavium_rng *rng)
+{
+	struct pci_dev *pdev;
+
+	/* Health status is not supported on 83xx, skip mapping PF CSRs */
+	if (is_octeontx(rng->pdev)) {
+		rng->pf_regbase = NULL;
+		return 0;
+	}
+
+	pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
+			      PCI_DEVID_CAVIUM_RNG_PF, NULL);
+	if (!pdev) {
+		dev_err(&pdev->dev, "Cannot find RNG PF device\n");
+		return -EIO;
+	}
+
+	rng->pf_regbase = ioremap(pci_resource_start(pdev, 0),
+				  pci_resource_len(pdev, 0));
+	if (!rng->pf_regbase) {
+		dev_err(&pdev->dev, "Failed to map PF CSR region\n");
+		pci_dev_put(pdev);
+		return -ENOMEM;
+	}
+
+	pci_dev_put(pdev);
+
+	/* Get co-processor clock rate */
+	rng->clock_rate = rng_get_coprocessor_clkrate();
+
+	return 0;
+}
+
 /* Map Cavium RNG to an HWRNG object */
 static int cavium_rng_probe_vf(struct	pci_dev		*pdev,
 			 const struct	pci_device_id	*id)
@@ -50,6 +210,8 @@ static int cavium_rng_probe_vf(struct	pci_dev		*pdev,
 	if (!rng)
 		return -ENOMEM;
 
+	rng->pdev = pdev;
+
 	/* Map the RNG result */
 	rng->result = pcim_iomap(pdev, 0, 0);
 	if (!rng->result) {
@@ -67,6 +229,11 @@ static int cavium_rng_probe_vf(struct	pci_dev		*pdev,
 
 	pci_set_drvdata(pdev, rng);
 
+	/* Health status is available only at PF, hence map PF registers. */
+	ret = cavium_map_pf_regs(rng);
+	if (ret)
+		return ret;
+
 	ret = devm_hwrng_register(&pdev->dev, &rng->ops);
 	if (ret) {
 		dev_err(&pdev->dev, "Error registering device as HWRNG.\n");
@@ -76,10 +243,18 @@ static int cavium_rng_probe_vf(struct	pci_dev		*pdev,
 	return 0;
 }
 
+/* Remove the VF */
+static void cavium_rng_remove_vf(struct pci_dev *pdev)
+{
+	struct cavium_rng *rng;
+
+	rng = pci_get_drvdata(pdev);
+	iounmap(rng->pf_regbase);
+}
 
 static const struct pci_device_id cavium_rng_vf_id_table[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa033), 0, 0, 0},
-	{0,},
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CAVIUM_RNG_VF) },
+	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, cavium_rng_vf_id_table);
 
@@ -87,8 +262,9 @@ static struct pci_driver cavium_rng_vf_driver = {
 	.name		= "cavium_rng_vf",
 	.id_table	= cavium_rng_vf_id_table,
 	.probe		= cavium_rng_probe_vf,
+	.remove		= cavium_rng_remove_vf,
 };
 module_pci_driver(cavium_rng_vf_driver);
 
 MODULE_AUTHOR("Omer Khaliq <okhaliq@...iumnetworks.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/hw_random/cavium-rng.c b/drivers/char/hw_random/cavium-rng.c
index 63d6e68..b965792 100644
--- a/drivers/char/hw_random/cavium-rng.c
+++ b/drivers/char/hw_random/cavium-rng.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Hardware Random Number Generator support for Cavium Inc.
- * Thunder processor family.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Hardware Random Number Generator support.
+ * Cavium Thunder, Marvell OcteonTx/Tx2 processor families.
  *
  * Copyright (C) 2016 Cavium, Inc.
  */
@@ -91,4 +88,4 @@ static struct pci_driver cavium_rng_pf_driver = {
 
 module_pci_driver(cavium_rng_pf_driver);
 MODULE_AUTHOR("Omer Khaliq <okhaliq@...iumnetworks.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ