lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211024145931.1916-4-dariobin@libero.it> Date: Sun, 24 Oct 2021 16:59:27 +0200 From: Dario Binacchi <dariobin@...ero.it> To: linux-kernel@...r.kernel.org Cc: Dario Binacchi <dariobin@...ero.it>, Dmitry Torokhov <dmitry.torokhov@...il.com>, linux-input@...r.kernel.org Subject: [PATCH 3/6] input: ti_am335x_tsc: lower the X and Y sampling time The open delay time has to be applied only on the first sample of the X/Y coordinates because on the following samples the ADC channel is not changed. Removing this time from the samples after the first one, "ti,coordinate-readouts" greater than 1, decreases the total acquisition time, allowing to increase the number of acquired coordinates in the time unit. Signed-off-by: Dario Binacchi <dariobin@...ero.it> --- drivers/input/touchscreen/ti_am335x_tsc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index cfc943423241..f4ef218bc1b8 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -126,7 +126,7 @@ static int titsc_config_wires(struct titsc *ts_dev) static void titsc_step_config(struct titsc *ts_dev) { unsigned int config; - int i; + int i, n; int end_step, first_step, tsc_steps; u32 stepenable; @@ -151,9 +151,11 @@ static void titsc_step_config(struct titsc *ts_dev) first_step = TOTAL_STEPS - tsc_steps; /* Steps 16 to 16-coordinate_readouts is for X */ end_step = first_step + tsc_steps; + n = 0; for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); - titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + titsc_writel(ts_dev, REG_STEPDELAY(i), + n++ == 0 ? STEPCONFIG_OPENDLY : 0); } config = 0; @@ -175,9 +177,11 @@ static void titsc_step_config(struct titsc *ts_dev) /* 1 ... coordinate_readouts is for Y */ end_step = first_step + ts_dev->coordinate_readouts; + n = 0; for (i = first_step; i < end_step; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); - titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + titsc_writel(ts_dev, REG_STEPDELAY(i), + n++ == 0 ? STEPCONFIG_OPENDLY : 0); } /* Make CHARGECONFIG same as IDLECONFIG */ -- 2.17.1
Powered by blists - more mailing lists