lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211024180628.2992108-3-piyush.mehta@xilinx.com>
Date:   Sun, 24 Oct 2021 23:36:28 +0530
From:   Piyush Mehta <piyush.mehta@...inx.com>
To:     <gregkh@...uxfoundation.org>, <--to=robh+dt@...nel.org>,
        <mka@...omium.org>, <ravisadineni@...omium.org>,
        <stern@...land.harvard.edu>, <alcooperx@...il.com>,
        <michal.simek@...inx.com>
CC:     <piyush.mehta@...inx.com>, <linux-usb@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <git@...inx.com>, <sgoud@...inx.com>
Subject: [PATCH 2/2] usb: misc: usb244: add support for USB2 ultra fast sd controller

Microchip's USB224x family of Hi-Speed USB 2.0 flash media card controllers
provides an ultra-fast interface between a USB host controller and flash
media cards.

This patch adds a GPIO based usb-sd reset for USB2244 USB2 ultra fast
SD controller. This usb2244 driver trigger sd reset signal after soft
reset or core Reset. The SD needs to be resetted after completion of
phy initialization. After the toggling of gpio, controller gets out
form reset. USB2244 is a simple platform device driver.

As part of the reset, sets the direction of the pin to output before
toggling the pin. Delay of microseconds is added in between low and
high to meet the setup and hold time requirement of the reset.

Signed-off-by: Piyush Mehta <piyush.mehta@...inx.com>
---
 drivers/usb/misc/Kconfig   |  8 ++++++
 drivers/usb/misc/Makefile  |  1 +
 drivers/usb/misc/usb2244.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+)
 create mode 100644 drivers/usb/misc/usb2244.c

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 8f11443..5480c50 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -233,6 +233,14 @@ config USB_EZUSB_FX2
 	  Say Y here if you need EZUSB device support.
 	  (Cypress FX/FX2/FX2LP microcontrollers)
 
+config USB_USB2244
+	tristate "Microchip USB2244 Ultra Fast USB 2.0 SD driver"
+	depends on GPIOLIB
+	help
+	  This option enables support for Microchip USB2244 Ultra Fast USB 2.0
+	  SD controller. This driver reset the gpio pin makes controller out of
+	  reset.
+
 config USB_HUB_USB251XB
 	tristate "USB251XB Hub Controller Configuration Driver"
 	depends on I2C
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 5f4e598..ec22c12 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
 obj-$(CONFIG_USB_USS720)		+= uss720.o
 obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
 obj-$(CONFIG_USB_YUREX)			+= yurex.o
+obj-$(CONFIG_USB_USB2244)		+= usb2244.o
 obj-$(CONFIG_USB_HUB_USB251XB)		+= usb251xb.o
 obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
 obj-$(CONFIG_USB_HSIC_USB4604)		+= usb4604.o
diff --git a/drivers/usb/misc/usb2244.c b/drivers/usb/misc/usb2244.c
new file mode 100644
index 0000000..c9613b6
--- /dev/null
+++ b/drivers/usb/misc/usb2244.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Microchip USB2244 Ultra Fast USB 2.0 Multi-Format,
+ * SD/MMC, and MS Flash Media Controllers
+ *
+ * Copyright (c) 2021 Xilinx, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+
+struct usb2244 {
+	struct gpio_desc *reset_gpio;
+};
+
+static int usb2244_init_hw(struct device *dev, struct usb2244 *data)
+{
+	data = devm_kzalloc(dev, sizeof(struct usb2244), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset_gpio)) {
+		dev_err_probe(dev, PTR_ERR(data->reset_gpio),
+			      "Failed to request reset GPIO %ld, errcode",
+			      PTR_ERR(data->reset_gpio));
+		return PTR_ERR(data->reset_gpio);
+	}
+
+	/* Toggle RESET_N to reset the hub. */
+	gpiod_set_value_cansleep(data->reset_gpio, 0);
+	usleep_range(5, 10);
+	gpiod_set_value_cansleep(data->reset_gpio, 1);
+	msleep(5);
+
+	return 0;
+}
+
+static int usb2244_probe(struct platform_device *pdev)
+{
+	struct usb2244 *data = NULL;
+
+	/* Trigger gpio reset to the hub. */
+	return usb2244_init_hw(&pdev->dev, data);
+}
+
+static const struct of_device_id usb2244_of_match[] = {
+	{ .compatible = "microchip,usb2244", },
+	{ }
+};
+
+static struct platform_driver usb2244_driver = {
+	.driver = {
+		.name = "microchip,usb2244",
+		.of_match_table	= usb2244_of_match,
+	},
+	.probe = usb2244_probe,
+};
+
+module_platform_driver(usb2244_driver);
+
+MODULE_AUTHOR("Piyush Mehta <piyush.mehta@...inx.com>");
+MODULE_DESCRIPTION("USB2244 Ultra Fast SD-Controller");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ