[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAK8P3a1aZ-LMANnvcr4XX=uTbut78yL=48E8iLHr3AFgVqpi+g@mail.gmail.com>
Date: Sun, 24 Oct 2021 20:17:12 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Jesse Taube <mr.bossman075@...il.com>
Cc: NXP Linux Team <linux-imx@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Dong Aisheng <aisheng.dong@....com>,
Stefan Agner <stefan@...er.ch>,
Linus Walleij <linus.walleij@...aro.org>,
gregkh <gregkh@...uxfoundation.org>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
SoC Team <soc@...nel.org>,
Russell King - ARM Linux <linux@...linux.org.uk>,
Abel Vesa <abel.vesa@....com>,
Adrian Hunter <adrian.hunter@...el.com>,
Jiri Slaby <jirislaby@...nel.org>,
giulio.benetti@...ettiengineering.com,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>,
Leonard Crestez <leonard.crestez@....com>,
b20788@...escale.com, Andy Duan <fugang.duan@....com>,
linux-clk <linux-clk@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-mmc <linux-mmc@...r.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>
Subject: Re: [PATCH 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
On Sun, Oct 24, 2021 at 5:40 PM Jesse Taube <mr.bossman075@...il.com> wrote:
> + pinctrl_semc: semcgrp {
> + fsl,pins = <
This node doesn't appear to be referenced from anywhere. Is it actually needed?
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + gpio3 = &gpio4;
> + gpio4 = &gpio5;
> + mmc0 = &usdhc1;
> + serial0 = &lpuart1;
> + };
The aliases should go into the .dts file.
> + edma1: dma-controller@...E8000 {
> + #dma-cells = <2>;
> + compatible = "fsl,imx7ulp-edma";
> + reg = <0x400E8000 0x4000>,
> + <0x400EC000 0x4000>;
Use lowercase letters in hex numbers here.
Arnd
Powered by blists - more mailing lists