| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGgu=sCeJNqWaTBUpOZNGeVo+OJp--3W8CP9gmbR9mknR8qN8w@mail.gmail.com>
Date: Mon, 25 Oct 2021 20:24:52 +0200
From: Erik Ekman <erik@...o.se>
To: Sasha Levin <sashal@...nel.org>
Cc: linux-kernel@...r.kernel.org, stable@...r.kernel.org,
Martin Habets <habetsm.xilinx@...il.com>,
"David S . Miller" <davem@...emloft.net>, ecree.xilinx@...il.com,
kuba@...nel.org, netdev@...r.kernel.org
Subject: Re: [PATCH AUTOSEL 5.14 15/18] sfc: Export fibre-specific supported
link modes
This needs 041c61488236a5a8 ("sfc: Fix reading non-legacy supported
link modes") from net-next to work for 10G/25G/50G/100G.
Thanks/
Erik
On Mon, 25 Oct 2021 at 19:00, Sasha Levin <sashal@...nel.org> wrote:
>
> From: Erik Ekman <erik@...o.se>
>
> [ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]
>
> The 1/10GbaseT modes were set up for cards with SFP+ cages in
> 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
> 10GbaseT was likely used since no 10G fibre mode existed.
>
> The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
> ("net: ethtool: add support for 1000BaseX and missing 10G link modes")
> shortly thereafter.
>
> The user guide available at https://support-nic.xilinx.com/wp/drivers
> lists support for the following cable and transceiver types in section 2.9:
> - QSFP28 100G Direct Attach Cables
> - QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
> - SFP28 25G Direct Attach Cables
> - SFP28 25G SR Optical Transceivers
> - QSFP+ 40G Direct Attach Cables
> - QSFP+ 40G Active Optical Cables
> - QSFP+ 40G SR4 Optical Transceivers
> - QSFP+ to SFP+ Breakout Direct Attach Cables
> - QSFP+ to SFP+ Breakout Active Optical Cables
> - SFP+ 10G Direct Attach Cables
> - SFP+ 10G SR Optical Transceivers
> - SFP+ 10G LR Optical Transceivers
> - SFP 1000BASE‐T Transceivers
> - 1G Optical Transceivers
> (From user guide issue 28. Issue 16 which also includes older cards like
> SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
>
> Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
> "Solarflare adapters do not support 10GBASE‐T transceiver modules."
>
> Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
> depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
> Before:
>
> $ ethtool ext
> Settings for ext:
> Supported ports: [ FIBRE ]
> Supported link modes: 1000baseT/Full
> 10000baseT/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: No
> Supported FEC modes: Not reported
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Advertised FEC modes: Not reported
> Link partner advertised link modes: Not reported
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: No
> Link partner advertised FEC modes: Not reported
> Speed: 1000Mb/s
> Duplex: Full
> Auto-negotiation: off
> Port: FIBRE
> PHYAD: 255
> Transceiver: internal
> Current message level: 0x000020f7 (8439)
> drv probe link ifdown ifup rx_err tx_err hw
> Link detected: yes
>
> After:
>
> $ ethtool ext
> Settings for ext:
> Supported ports: [ FIBRE ]
> Supported link modes: 1000baseT/Full
> 1000baseX/Full
> 10000baseCR/Full
> 10000baseSR/Full
> 10000baseLR/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: No
> Supported FEC modes: Not reported
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Advertised FEC modes: Not reported
> Link partner advertised link modes: Not reported
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: No
> Link partner advertised FEC modes: Not reported
> Speed: 1000Mb/s
> Duplex: Full
> Auto-negotiation: off
> Port: FIBRE
> PHYAD: 255
> Transceiver: internal
> Supports Wake-on: g
> Wake-on: d
> Current message level: 0x000020f7 (8439)
> drv probe link ifdown ifup rx_err tx_err hw
> Link detected: yes
>
> Signed-off-by: Erik Ekman <erik@...o.se>
> Acked-by: Martin Habets <habetsm.xilinx@...il.com>
> Signed-off-by: David S. Miller <davem@...emloft.net>
> Signed-off-by: Sasha Levin <sashal@...nel.org>
> ---
> drivers/net/ethernet/sfc/mcdi_port_common.c | 37 +++++++++++++++------
> 1 file changed, 26 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c
> index 4bd3ef8f3384..c4fe3c48ac46 100644
> --- a/drivers/net/ethernet/sfc/mcdi_port_common.c
> +++ b/drivers/net/ethernet/sfc/mcdi_port_common.c
> @@ -132,16 +132,27 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset)
> case MC_CMD_MEDIA_SFP_PLUS:
> case MC_CMD_MEDIA_QSFP_PLUS:
> SET_BIT(FIBRE);
> - if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
> + if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) {
> SET_BIT(1000baseT_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
> - SET_BIT(10000baseT_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN))
> + SET_BIT(1000baseX_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) {
> + SET_BIT(10000baseCR_Full);
> + SET_BIT(10000baseLR_Full);
> + SET_BIT(10000baseSR_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) {
> SET_BIT(40000baseCR4_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN))
> + SET_BIT(40000baseSR4_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) {
> SET_BIT(100000baseCR4_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN))
> + SET_BIT(100000baseSR4_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) {
> SET_BIT(25000baseCR_Full);
> + SET_BIT(25000baseSR_Full);
> + }
> if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN))
> SET_BIT(50000baseCR2_Full);
> break;
> @@ -192,15 +203,19 @@ u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
> result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
> if (TEST_BIT(1000baseT_Half))
> result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
> - if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
> + if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full) ||
> + TEST_BIT(1000baseX_Full))
> result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
> - if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
> + if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full) ||
> + TEST_BIT(10000baseCR_Full) || TEST_BIT(10000baseLR_Full) ||
> + TEST_BIT(10000baseSR_Full))
> result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
> - if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
> + if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full) ||
> + TEST_BIT(40000baseSR4_Full))
> result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
> - if (TEST_BIT(100000baseCR4_Full))
> + if (TEST_BIT(100000baseCR4_Full) || TEST_BIT(100000baseSR4_Full))
> result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
> - if (TEST_BIT(25000baseCR_Full))
> + if (TEST_BIT(25000baseCR_Full) || TEST_BIT(25000baseSR_Full))
> result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
> if (TEST_BIT(50000baseCR2_Full))
> result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
> --
> 2.33.0
>
Powered by blists - more mailing lists