[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211025191002.074513926@linuxfoundation.org>
Date: Mon, 25 Oct 2021 21:14:33 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Zheyu Ma <zheyuma97@...il.com>,
Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH 5.10 36/95] can: peak_pci: peak_pci_remove(): fix UAF
From: Zheyu Ma <zheyuma97@...il.com>
commit 949fe9b35570361bc6ee2652f89a0561b26eec98 upstream.
When remove the module peek_pci, referencing 'chan' again after
releasing 'dev' will cause UAF.
Fix this by releasing 'dev' later.
The following log reveals it:
[ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537
[ 35.965513 ] Call Trace:
[ 35.965718 ] dump_stack_lvl+0xa8/0xd1
[ 35.966028 ] print_address_description+0x87/0x3b0
[ 35.966420 ] kasan_report+0x172/0x1c0
[ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170
[ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.967945 ] __asan_report_load8_noabort+0x14/0x20
[ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.968752 ] pci_device_remove+0xa9/0x250
Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards")
Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com
Cc: stable@...r.kernel.org
Signed-off-by: Zheyu Ma <zheyuma97@...il.com>
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/can/sja1000/peak_pci.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -731,16 +731,15 @@ static void peak_pci_remove(struct pci_d
struct net_device *prev_dev = chan->prev_dev;
dev_info(&pdev->dev, "removing device %s\n", dev->name);
+ /* do that only for first channel */
+ if (!prev_dev && chan->pciec_card)
+ peak_pciec_remove(chan->pciec_card);
unregister_sja1000dev(dev);
free_sja1000dev(dev);
dev = prev_dev;
- if (!dev) {
- /* do that only for first channel */
- if (chan->pciec_card)
- peak_pciec_remove(chan->pciec_card);
+ if (!dev)
break;
- }
priv = netdev_priv(dev);
chan = priv->priv;
}
Powered by blists - more mailing lists