| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75VfKcS1eRRBypjkQG2D3QiFHOae9Ub1VcT=Mopt2wDAztg@mail.gmail.com>
Date: Mon, 25 Oct 2021 12:29:31 +0300
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Mauri Sandberg <maukka@....kapsi.fi>
Cc: Mauri Sandberg <sandberg@...lfence.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Linus Walleij <linus.walleij@...aro.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Drew Fustini <drew@...gleboard.org>
Subject: Re: [PATCH v7 2/2] gpio: gpio-cascade: add generic GPIO cascade
On Tue, Oct 19, 2021 at 11:10 PM Mauri Sandberg <maukka@....kapsi.fi> wrote:
>
> Adds support for building cascades of GPIO lines. That is, it allows
> setups when there is one upstream line and multiple cascaded lines, out
> of which one can be chosen at a time. The status of the upstream line
> can be conveyed to the selected cascaded line or, vice versa, the status
> of the cascaded line can be conveyed to the upstream line.
>
> A multiplexer is being used to select, which cascaded GPIO line is being
> used at any given time.
>
> At the moment only input direction is supported. In future it should be
> possible to add support for output direction, too.
A nit-pick below and you may have my
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> Signed-off-by: Mauri Sandberg <maukka@....kapsi.fi>
> ---
> v6 -> v7:
> - In Kconfig add info about module name
> - adhere to new convention that allows lines longer than 80 chars
> - use dev_probe_err with upstream gpio line too
> - refactor for cleaner exit of probe function.
> v5 -> v6:
> - In Kconfig, remove dependency to OF_GPIO and select only MULTIPLEXER
> - refactor code preferring one-liners
> - clean up prints, removing them from success-path.
> - don't explicitly set gpio_chip.of_node as it's done in the GPIO library
> - use devm_gpiochip_add_data instead of gpiochip_add
> v4 -> v5:
> - renamed gpio-mux-input -> gpio-cascade. refactored code accordingly
> here and there and changed to use new bindings and compatible string
> - ambigious and vague 'pin' was rename to 'upstream_line'
> - dropped Tested-by and Reviewed-by due to changes in bindings
> - dropped Reported-by suggested by an automatic bot as it was not really
> appropriate to begin with
> - functionally it's the same as v4
> v3 -> v4:
> - Changed author email
> - Included Tested-by and Reviewed-by from Drew
> v2 -> v3:
> - use managed device resources
> - update Kconfig description
> v1 -> v2:
> - removed .owner from platform_driver as per test bot's instruction
> - added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE
> - added gpio_mux_input_get_direction as it's recommended for all chips
> - removed because this is input only chip: gpio_mux_input_set_value
> - removed because they are not needed for input/output only chips:
> gpio_mux_input_direction_input
> gpio_mux_input_direction_output
> - fixed typo in an error message
> - added info message about successful registration
> - removed can_sleep flag as this does not sleep while getting GPIO value
> like I2C or SPI do
> - Updated description in Kconfig
> ---
> drivers/gpio/Kconfig | 15 +++++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-cascade.c | 118 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 134 insertions(+)
> create mode 100644 drivers/gpio/gpio-cascade.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 37a6f77c86fe..e69457144459 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -1694,4 +1694,19 @@ config GPIO_VIRTIO
>
> endmenu
>
> +comment "Other GPIO expanders"
> +
> +config GPIO_CASCADE
> + tristate "General GPIO cascade"
> + select MULTIPLEXER
> + help
> + Say yes here to enable support for generic GPIO cascade.
> +
> + This allows building one-to-many cascades of GPIO lines using
> + different types of multiplexers readily available. At the
> + moment only input lines are supported.
> +
> + To build the driver as a module choose 'm' and the resulting module
> + will be called 'gpio-cascade'.
> +
> endif
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 71ee9fc2ff83..e8945456e7ea 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
> obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
> obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
> obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o
> +obj-$(CONFIG_GPIO_CASCADE) += gpio-cascade.o
> obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
> obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
> obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
> diff --git a/drivers/gpio/gpio-cascade.c b/drivers/gpio/gpio-cascade.c
> new file mode 100644
> index 000000000000..82001299265e
> --- /dev/null
> +++ b/drivers/gpio/gpio-cascade.c
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * A generic GPIO cascade driver
> + *
> + * Copyright (C) 2021 Mauri Sandberg <maukka@....kapsi.fi>
> + *
> + * This allows building cascades of GPIO lines in a manner illustrated
> + * below:
> + *
> + * /|---- Cascaded GPIO line 0
> + * Upstream | |---- Cascaded GPIO line 1
> + * GPIO line ----+ | .
> + * | | .
> + * \|---- Cascaded GPIO line n
> + *
> + * A gpio-mux is being used to select, which cascaded line is being
> + * addressed at any given time.
> + *
> + * At the moment only input mode is supported due to lack of means for
> + * testing output functionality. At least theoretically output should be
> + * possible with an open drain constructions.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/mux/consumer.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/gpio/driver.h>
> +
> +struct gpio_cascade {
> + struct device *parent;
> + struct gpio_chip gpio_chip;
Make the gpio_chip first and any container_of become a no-op at compile time!
> + struct mux_control *mux_control;
> + struct gpio_desc *upstream_line;
> +};
> +
> +static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc)
> +{
> + return container_of(gc, struct gpio_cascade, gpio_chip);
> +}
> +
> +static int gpio_cascade_get_direction(struct gpio_chip *gc,
> + unsigned int offset)
> +{
> + return GPIO_LINE_DIRECTION_IN;
> +}
> +
> +static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct gpio_cascade *cas = chip_to_cascade(gc);
> + int ret;
> +
> + ret = mux_control_select(cas->mux_control, offset);
> + if (ret)
> + return ret;
> +
> + ret = gpiod_get_value(cas->upstream_line);
> + mux_control_deselect(cas->mux_control);
> + return ret;
> +}
> +
> +static int gpio_cascade_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct gpio_cascade *cas;
> + struct mux_control *mc;
> + struct gpio_desc *upstream;
> + struct gpio_chip *gc;
> +
> + cas = devm_kzalloc(dev, sizeof(*cas), GFP_KERNEL);
> + if (!cas)
> + return -ENOMEM;
> +
> + mc = devm_mux_control_get(dev, NULL);
> + if (IS_ERR(mc))
> + return dev_err_probe(dev, PTR_ERR(mc), "unable to get mux-control\n");
> +
> + cas->mux_control = mc;
> + upstream = devm_gpiod_get(dev, "upstream", GPIOD_IN);
> + if (IS_ERR(upstream))
> + return dev_err_probe(dev, PTR_ERR(upstream), "unable to claim upstream GPIO line\n");
> +
> + cas->upstream_line = upstream;
> + cas->parent = dev;
> +
> + gc = &cas->gpio_chip;
> + gc->get = gpio_cascade_get_value;
> + gc->get_direction = gpio_cascade_get_direction;
> + gc->base = -1;
> + gc->ngpio = mux_control_states(mc);
> + gc->label = dev_name(cas->parent);
> + gc->parent = cas->parent;
> + gc->owner = THIS_MODULE;
> +
> + platform_set_drvdata(pdev, cas);
> + return devm_gpiochip_add_data(dev, &cas->gpio_chip, NULL);
> +}
> +
> +static const struct of_device_id gpio_cascade_id[] = {
> + { .compatible = "gpio-cascade" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, gpio_cascade_id);
> +
> +static struct platform_driver gpio_cascade_driver = {
> + .driver = {
> + .name = "gpio-cascade",
> + .of_match_table = gpio_cascade_id,
> + },
> + .probe = gpio_cascade_probe,
> +};
> +module_platform_driver(gpio_cascade_driver);
> +
> +MODULE_AUTHOR("Mauri Sandberg <maukka@....kapsi.fi>");
> +MODULE_DESCRIPTION("Generic GPIO cascade");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists