Message-ID: <AS8PR04MB867697878533A37B72D7E4AA8C839@AS8PR04MB8676.eurprd04.prod.outlook.com>
Date:   Mon, 25 Oct 2021 02:12:54 +0000
From:   Richard Zhu <hongxing.zhu@....com>
To:     "tharvey@...eworks.com" <tharvey@...eworks.com>
CC:     Lucas Stach <l.stach@...gutronix.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        "vkoul@...nel.org" <vkoul@...nel.org>,
        Rob Herring <robh@...nel.org>,
        "galak@...nel.crashing.org" <galak@...nel.crashing.org>,
        Shawn Guo <shawnguo@...nel.org>,
        "linux-phy@...ts.infradead.org" <linux-phy@...ts.infradead.org>,
        Device Tree Mailing List <devicetree@...r.kernel.org>,
        Linux ARM Mailing List <linux-arm-kernel@...ts.infradead.org>,
        open list <linux-kernel@...r.kernel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie
 support


> -----Original Message-----
> From: Tim Harvey <tharvey@...eworks.com>
> Sent: Saturday, October 23, 2021 12:55 AM
> To: Richard Zhu <hongxing.zhu@....com>
> Cc: Lucas Stach <l.stach@...gutronix.de>; Kishon Vijay Abraham I
> <kishon@...com>; vkoul@...nel.org; Rob Herring <robh@...nel.org>;
> galak@...nel.crashing.org; Shawn Guo <shawnguo@...nel.org>;
> linux-phy@...ts.infradead.org; Device Tree Mailing List
> <devicetree@...r.kernel.org>; Linux ARM Mailing List
> <linux-arm-kernel@...ts.infradead.org>; open list
> <linux-kernel@...r.kernel.org>; Sascha Hauer <kernel@...gutronix.de>;
> dl-linux-imx <linux-imx@....com>
> Subject: Re: [PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie
> support
> 
> On Fri, Oct 22, 2021 at 8:59 AM Tim Harvey <tharvey@...eworks.com>
> wrote:
> >
> > On Thu, Oct 21, 2021 at 5:43 PM Richard Zhu <hongxing.zhu@....com>
> wrote:
> > >
> > > > -----Original Message-----
> > > > From: Tim Harvey <tharvey@...eworks.com>
> > > > Sent: Friday, October 22, 2021 12:25 AM
> > > > To: Richard Zhu <hongxing.zhu@....com>
> > > > Cc: Lucas Stach <l.stach@...gutronix.de>; Kishon Vijay Abraham I
> > > > <kishon@...com>; vkoul@...nel.org; Rob Herring <robh@...nel.org>;
> > > > galak@...nel.crashing.org; Shawn Guo <shawnguo@...nel.org>;
> > > > linux-phy@...ts.infradead.org; Device Tree Mailing List
> > > > <devicetree@...r.kernel.org>; Linux ARM Mailing List
> > > > <linux-arm-kernel@...ts.infradead.org>; open list
> > > > <linux-kernel@...r.kernel.org>; Sascha Hauer
> > > > <kernel@...gutronix.de>; dl-linux-imx <linux-imx@....com>
> > > > Subject: Re: [PATCH v3 0/9] add the imx8m pcie phy driver and
> > > > imx8mm pcie support
> > > >
> > > > On Wed, Oct 20, 2021 at 8:32 PM Richard Zhu <hongxing.zhu@....com>
> > > > wrote:
> > > > >
> > > > > <snipped...>
> > > > > >
> > > > > > Richard,
> > > > > >
> > > > > > What is this 'invalid resource' about? I see that with my
> > > > > > downstream IMX8MM PCIe driver as well and have been asked
> about it.
> > > > > >
> > > > > [Richard Zhu] Hi Tim:
> > > > > This complain is caused by the following codes in pcie-designware.c
> driver.
> > > > > I'm not sure that why there is only size assignment after the
> > > > > res valid check,
> > > > and do nothing if the res is invalid.
> > > > > It seems that it is an expected design logic refer to the later codes.
> > > > >                 if (!pci->atu_base) {
> > > > >                         struct resource *res =
> > > > >
> > > > platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu");
> > > > >                         if (res)
> > > > >                                 pci->atu_size =
> resource_size(res);
> > > > >                         pci->atu_base =
> > > > devm_ioremap_resource(dev, res);
> > > > >                         if (IS_ERR(pci->atu_base))
> > > > >                                 pci->atu_base =
> pci->dbi_base +
> > > > DEFAULT_DBI_ATU_OFFSET;
> > > > >                 }
> > > > >
> > > > > Since the default offset is used on i.MX8MM, the "atu" is not
> > > > > specified in
> > > > i.MX8MM PCIe DT node, so there is no real res at all.
> > > > > Then, devm_ioremap_resource() would complain the invalid resource.
> > > >
> > > > I think you are saying a change should be made like this:
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > > index a945f0c0e73d..3254f60d1713 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > @@ -671,10 +671,11 @@ void dw_pcie_iatu_detect(struct dw_pcie
> *pci)
> > > >                 if (!pci->atu_base) {
> > > >                         struct resource *res =
> > > >
> > > > platform_get_resource_byname(pdev,
> > > > IORESOURCE_MEM, "atu");
> > > > -                       if (res)
> > > > +                       if (res) {
> > > >                                 pci->atu_size =
> resource_size(res);
> > > > -                       pci->atu_base =
> devm_ioremap_resource(dev,
> > > > res);
> > > > -                       if (IS_ERR(pci->atu_base))
> > > > +                               pci->atu_base =
> > > > devm_ioremap_resource(dev, res);
> > > > +                       }
> > > > +                       if (!pci->atu_base ||
> > > > + IS_ERR(pci->atu_base))
> > > >                                 pci->atu_base = pci->dbi_base
> +
> > > > DEFAULT_DBI_ATU_OFFSET;
> > > >                 }
> > > >
> > > > so that it looks like this:
> > > >                 if (!pci->atu_base) {
> > > >                         struct resource *res =
> > > >
> > > > platform_get_resource_byname(pdev,
> > > > IORESOURCE_MEM, "atu");
> > > >                         if (res) {
> > > >                                 pci->atu_size =
> resource_size(res);
> > > >                                 pci->atu_base =
> > > > devm_ioremap_resource(dev, res);
> > > >                         }
> > > >                         if (!pci->atu_base ||
> IS_ERR(pci->atu_base))
> > > >                                 pci->atu_base = pci->dbi_base
> +
> > > > DEFAULT_DBI_ATU_OFFSET;
> > > >                 }
> > > >
> > > > Right?
> > > [Richard Zhu] Yes, it is. The res shouldn't be remapped if it is invalid
> resource memory.
> >
> > Ok, I will submit a patch for that.
> >
[Richard Zhu] Thanks for your help. Please cc me, if you issue that patch.

> > >
> > > >
> > > > >
> > > > > > > [    1.316305] imx6q-pcie 33800000.pcie: iATU unroll: enabled
> > > > > > > [    1.321799] imx6q-pcie 33800000.pcie: Detected iATU regions:
> 4
> > > > > > outbound, 4 inbound
> > > > > > > [    1.429803] imx6q-pcie 33800000.pcie: Link up
> > > > > > > [    1.534497] imx6q-pcie 33800000.pcie: Link up
> > > > > > > [    1.538870] imx6q-pcie 33800000.pcie: Link up, Gen2
> > > > > > > [    1.550364] imx6q-pcie 33800000.pcie: Link up
> > > > > > > [    1.550487] imx6q-pcie 33800000.pcie: PCI host bridge to bus
> > > > 0000:00
> > > > > > > [    1.565545] pci_bus 0000:00: root bus resource [bus 00-ff]
> > > > > > > [    1.573834] pci_bus 0000:00: root bus resource [io
> 0x0000-0xffff]
> > > > > > > [    1.580055] pci_bus 0000:00: root bus resource [mem
> > > > > > 0x18000000-0x1fefffff]
> > > > > > > [    1.586968] pci 0000:00:00.0: [16c3:abcd] type 01 class
> 0x060400
> > > > > > > [    1.592997] pci 0000:00:00.0: reg 0x10: [mem
> > > > 0x00000000-0x000fffff]
> > > > > > > [    1.599282] pci 0000:00:00.0: reg 0x38: [mem
> > > > 0x00000000-0x0000ffff
> > > > > > pref]
> > > > > > > [    1.606033] pci 0000:00:00.0: supports D1
> > > > > > > [    1.610053] pci 0000:00:00.0: PME# supported from D0 D1
> D3hot
> > > > > > D3cold
> > > > > > > [    1.618206] pci 0000:01:00.0: [15b7:5002] type 00 class
> 0x010802
> > > > > > > [    1.624293] pci 0000:01:00.0: reg 0x10: [mem
> > > > 0x00000000-0x00003fff
> > > > > > 64bit]
> > > > > > > [    1.631177] pci 0000:01:00.0: reg 0x20: [mem
> > > > 0x00000000-0x000000ff
> > > > > > 64bit]
> > > > > > > [    1.638409] pci 0000:01:00.0: 4.000 Gb/s available PCIe
> bandwidth,
> > > > > > limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of
> > > > > > 31.504 Gb/s with
> > > > > > 8.0 GT/s PCIe x4 link)
> > > > > > > [    1.664931] pci 0000:00:00.0: BAR 0: assigned [mem
> > > > > > 0x18000000-0x180fffff]
> > > > > > > [    1.671745] pci 0000:00:00.0: BAR 14: assigned [mem
> > > > > > 0x18100000-0x181fffff]
> > > > > > > [    1.678634] pci 0000:00:00.0: BAR 6: assigned [mem
> > > > > > 0x18200000-0x1820ffff pref]
> > > > > > > [    1.685873] pci 0000:01:00.0: BAR 0: assigned [mem
> > > > > > 0x18100000-0x18103fff 64bit]
> > > > > > > [    1.693222] pci 0000:01:00.0: BAR 4: assigned [mem
> > > > > > 0x18104000-0x181040ff 64bit]
> > > > > > > [    1.700577] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> > > > > > > [    1.705814] pci 0000:00:00.0:   bridge window [mem
> > > > > > 0x18100000-0x181fffff]
> > > > > > > [    1.712972] pcieport 0000:00:00.0: PME: Signaling with IRQ
> 216
> > > > > > > "
> > > > > > > Regarding the log you pasted, it seems that the clock is not
> > > > > > > feed to PHY
> > > > > > properly.
> > > > > > >
> > > > > > > Anyway, let's waiting for the v4 series, then make a try.
> > > > > > > Thanks for your
> > > > > > great help to make the double tests.
> > > > > > >
> > > > > >
> > > > > > My boards do not use CLKREQ# so I do not have that defined in
> > > > > > pinmux and I found that if I add
> > > > > > MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B
> > > > PCIe
> > > > > > works on my board but this isn't a solution just a work-around
> > > > > > (I have boards that use the only two possible pins for CLKREQ
> > > > > > as other
> > > > features).
> > > > > >
> > > > > > Similarly you will find on the imx8mm-evk if you comment out
> > > > > > the CLKREQ (which isn't required) the imx8mmevk will end up
> > > > > > hanging like my
> > > > boards:
> > > > > [Richard Zhu] Hi Tim:
> > > > > Regarding the SPEC, the CLKREQ# is mandatory required, and
> > > > > should be
> > > > configured as an open drain, active low signal.
> > > > > And this signal should be driven low by the PCIe M.2 device to
> > > > > request the
> > > > REF clock be available(active low).
> > > > > So, there is such kind of CLKREQ# pin definition on i.MX8MM EVK
> board.
> > > > >
> > > > > Anyway, I think the external OSC circuit should be always
> > > > > running if there is
> > > > no CLKREQ# on your HW board design.
> > > > >
> > > >
> > > > The way I understand it is CLKREQ# allows the host to disable the
> > > > REFCLK when not needed for power savings so it would seem optional
> > > > to implement that and if not implemented should be left unconnected on
> the card.
> > > >
> > > [Richard Zhu] No, not that way. Regarding the SPEC, this signal is
> mandatory required.
> > > Especially for the L1ss usages. This signal would be OD(open drain),
> > > bi-directional, and might be driven low/high by RC or EP automatically if
> L1ss modes are enabled.
> > > You can make reference to the
> > > "ECN_L1_PM_Substates_with_CLKREQ_31_May_2013_Rev10a", or the
> chapter 5.5 L1 PM Substates of "PCI Express Base Specification, Rev. 4.0
> Version 1.0".
> > >
> >
> > CLKREQ is only mandatory if you wish to support clock power
> > management. Many boards with a PCI host controller do not support
> > this.
[Richard Zhu] Okay, understood.

> >
> > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > > > > > b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > > > > > index 5ce43daa0c8b..f0023b48f475 100644
> > > > > > --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > > > > > @@ -448,7 +448,9 @@
> > > > > >
> > > > > >         pinctrl_pcie0: pcie0grp {
> > > > > >                 fsl,pins = <
> > > > > > +/*
> > > > > >
> > > > > > MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
> > > > > > +*/
> > > > > >
> > > > MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21
> > > > > > 0x41
> > > > > >                 >;
> > > > > >         };
> > > > > >
> > > > > > I have PCIe working with a driver that I ported from NXP's
> > > > > > kernel which differs from your driver in that the PCIe PHY is
> > > > > > not abstracted to its own driver so I think this has something
> > > > > > to do with the order in which the phy is reset or initialized?
> > > > > > The configuration of
> > > > gpr14 bits looks correct to me.
> > > > > [Richard Zhu] The CLKREQ# PIN definition shouldn't be masked.
> > > > > In the NXP's local BSP kernel, I just force CLKREQ# low to level
> > > > > up the HW
> > > > compatibility.
> > > > > That's might the reason why the PCIe works on your HW board
> > > > > although the
> > > > CLKREQ# PIN is not defined.
> > > > > This method is a little rude and violate the SPEC, and not
> > > > > recommended
> > > > although it levels up the HW compatibility.
> > > > > So I drop this method in this series.
> > > > >
> > > >
> > > > Sorry, I don't understand what you are saying here. Is there a
> > > > change you are going to make to v4 that will make this work for
> > > > the evk and my boards? What is that change exactly?
> > > [Richard Zhu] No. What I said above is that the CLKREQ# is forced to
> > > be low in NXP local BSP kernel. I guess this might be the reason why your
> board works.
> > >
> > > BIT11 and BIT10 of IOMUXC_GPR14 can be used to force the CLKREQ# to
> be low.
> > > Set CLKREQ_OVERRIDE_EN(bit10) 1b1, then write one zero to
> CLKREQ_OVERRIDE(bit11).
> > >
> >
> > Ok, that makes sense. Those bits are not explained well in the
> > IMX8MMRM. As my board's external REFCLK is always enabled that must
> > gate the clock internally to the host controller block.
> >
> > I can confirm that asserting those GPR14 bits does resolve my issue:
> >
> > #define IMX8MM_GPR_PCIE_CLKREQ_OVERRIDE_VAL    BIT(11)
> > #define IMX8MM_GPR_PCIE_CLKREQ_OVERRIDE_EN     BIT(10)
> >
> >        /*
> >         * for boards that do not connect CLKREQ#,
> >         * override CLKREQ# and drive it low internally
> >         */
> >        regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> >
> IMX8MM_GPR_PCIE_CLKREQ_OVERRIDE_VAL, 0);
> >        regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> >
> IMX8MM_GPR_PCIE_CLKREQ_OVERRIDE_EN, 1);
[Richard Zhu] regmap bits operations should manipulate according bits.
The BIT(10) and BIT(11) should be touched actually.

> >
> > Should this be added as a 'fsl,clkreq-unsupported' flag that needs to
> > be set true to implement the above code?
> >
> 
> Richard,
> 
> Sorry - spoke too soon. My test was flawed as I still was pinmuxing CLKREQ in
> my dt to work around the issue and after removed the above did not resolve
> my issue. The setting of OVERRIDE_EN was wrong above (should not be set to
> '1' but BIT(10) instead) but this code already exists in
> imx6_pcie_enable_ref_clk and is used for IMX8MM per your patch so this is
> not the issue.
> 
> What makes my board work is to clear GPR14 bit9 (like the NXP kernel
> does) so I don't think this bit does what we think it does (select between
> internal and ext clk). I think setting it enables clock gating via CLKREQ#.
> 
> This also points out that perhaps the CLKREQ_OVERRIDE logic should be
> moved to the new phy driver for IMX8MM.
[Richard Zhu] It sounds reasonable to consider to force the CLKREQ# to be low.
I will think about that and add this in later v5 patch-set if nobody has different concerns.
Thanks.

BR
Richard
 
> 
> Best regards,
> 
> Tim

Powered by blists - more mailing lists