| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211028075344.1688-1-etienne.carriere@linaro.org>
Date: Thu, 28 Oct 2021 09:53:43 +0200
From: Etienne Carriere <etienne.carriere@...aro.org>
To: linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org,
Sudeep Holla <sudeep.holla@....com>,
Cristian Marussi <cristian.marussi@....com>,
Vincent Guittot <vincent.guittot@...aro.org>,
Etienne Carriere <etienne.carriere@...aro.org>,
devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>
Subject: [PATCH v7 1/2] dt-bindings: arm: Add OP-TEE transport for SCMI
Introduce compatible "linaro,scmi-optee" for SCMI transport channel
based on an OP-TEE service invocation. The compatible mandates a
channel ID defined with property "linaro,optee-channel-id".
Cc: devicetree@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>
Signed-off-by: Etienne Carriere <etienne.carriere@...aro.org>
---
Changes since v6:
- Remove maxItems from linaro,optee-channel-id description
No change since v5
Changes since v4:
- Fix sram node name in DTS example: s/-shm-/-sram-/
Changes since v3:
- Add description for linaro,optee-channel-id in patternProperties
specifying protocol can optionaly define a dedicated channel id.
- Fix DTS example (duplicated phandles issue, subnodes ordering)
- Fix typo in DTS example and description comments.
Changes since v2:
- Define mandatory property linaro,optee-channel-id
- Rebased on yaml description file
Changes since v1:
- Removed modification regarding mboxes property description.
---
.../bindings/firmware/arm,scmi.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5c4c6782e052..eae15df36eef 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -38,6 +38,9 @@ properties:
The virtio transport only supports a single device.
items:
- const: arm,scmi-virtio
+ - description: SCMI compliant firmware with OP-TEE transport
+ items:
+ - const: linaro,scmi-optee
interrupts:
description:
@@ -83,6 +86,11 @@ properties:
description:
SMC id required when using smc or hvc transports
+ linaro,optee-channel-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Channel specifier required when using OP-TEE transport.
+
protocol@11:
type: object
properties:
@@ -195,6 +203,12 @@ patternProperties:
minItems: 1
maxItems: 2
+ linaro,optee-channel-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Channel specifier required when using OP-TEE transport and
+ protocol has a dedicated communication channel.
+
required:
- reg
@@ -226,6 +240,16 @@ else:
- arm,smc-id
- shmem
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: linaro,scmi-optee
+ then:
+ required:
+ - linaro,optee-channel-id
+
examples:
- |
firmware {
@@ -340,7 +364,48 @@ examples:
reg = <0x11>;
#power-domain-cells = <1>;
};
+ };
+ };
+
+ - |
+ firmware {
+ scmi {
+ compatible = "linaro,scmi-optee";
+ linaro,optee-channel-id = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_dvfs1: protocol@13 {
+ reg = <0x13>;
+ linaro,optee-channel-id = <1>;
+ shmem = <&cpu_optee_lpri0>;
+ #clock-cells = <1>;
+ };
+
+ scmi_clk0: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ sram@...00000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x51000000 0x0 0x10000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x51000000 0x10000>;
+
+ cpu_optee_lpri0: optee-sram-section@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x80>;
+ };
};
};
--
2.17.1
Powered by blists - more mailing lists