[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdXK0dVpNsCUAv6eqPi0Zqek1hymvW6HrcDfJPtDVJ4hog@mail.gmail.com>
Date: Thu, 28 Oct 2021 11:10:19 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH 4/4] pinctrl: renesas: pinctrl-rzg2l: Add support to
get/set drive-strength and output-impedance-ohms
Hi Prabhakar,
On Thu, Oct 28, 2021 at 10:59 AM Lad, Prabhakar
<prabhakar.csengg@...il.com> wrote:
> On Thu, Oct 28, 2021 at 8:56 AM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > On Wed, Oct 27, 2021 at 3:45 PM Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> > > Add support to get/set drive-strength and output-impedance-ohms
> > > for the supported pins.
> > >
> > > While at it also renamed the below macros to match the HW manual,
> > > PIN_CFG_IOLH_SD0 -> PIN_CFG_IO_VMC_SD0
> > > PIN_CFG_IOLH_SD1 -> PIN_CFG_IO_VMC_SD1
> > > PIN_CFG_IOLH_QSPI -> PIN_CFG_IO_VMC_QSPI
> > > PIN_CFG_IOLH_ETH0 -> PIN_CFG_IO_VMC_ETH0
> > > PIN_CFG_IOLH_ETH1 -> PIN_CFG_IO_VMC_ETH1
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > The rest looks good to me!
> >
> Thanks, I'll post a v2 just with patches 3 and 4 only. Hope that is OK with you.
That's fine for me. I can take 1/4 and 2/4 of this series, if LinusW
and Rob give their Acked-by.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists