lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 28 Oct 2021 12:18:37 +0200
From:   Andrea Merello <andrea.merello@...il.com>
To:     jic23@...nel.org, mchehab+huawei@...nel.org,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Cc:     lars@...afoo.de, robh+dt@...nel.org, andy.shevchenko@...il.com,
        matt.ranostay@...sulko.com, ardeleanalex@...il.com,
        jacopo@...ndi.org, Andrea Merello <andrea.merello@...il.com>,
        Andrea Merello <andrea.merello@....it>
Subject: [v2 07/10] iio: imu: add Bosch Sensortec BNO055 core driver

This patch adds a core driver for the BNO055 IMU from Bosch. This IMU
can be connected via both serial and I2C busses; separate patches will
add support for them.

The driver supports "AMG" (Accelerometer, Magnetometer, Gyroscope) mode,
that provides raw data from the said internal sensors, and a couple of
"fusion" modes (i.e. the IMU also do calculations in order to provide
euler angles, quaternions, linear acceleration and gravity measurements).

In fusion modes the AMG data is still available (with some calibration
refinements done by the IMU), but certain settings such as low pass
filters cut-off frequency and sensors ranges are fixed, while in AMG mode
they can be customized; this is why AMG mode can still be interesting.

Signed-off-by: Andrea Merello <andrea.merello@....it>
---
 drivers/iio/imu/Kconfig         |    1 +
 drivers/iio/imu/Makefile        |    1 +
 drivers/iio/imu/bno055/Kconfig  |    4 +
 drivers/iio/imu/bno055/Makefile |    3 +
 drivers/iio/imu/bno055/bno055.c | 1480 +++++++++++++++++++++++++++++++
 drivers/iio/imu/bno055/bno055.h |   12 +
 6 files changed, 1501 insertions(+)
 create mode 100644 drivers/iio/imu/bno055/Kconfig
 create mode 100644 drivers/iio/imu/bno055/Makefile
 create mode 100644 drivers/iio/imu/bno055/bno055.c
 create mode 100644 drivers/iio/imu/bno055/bno055.h

diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 001ca2c3ff95..f1d7d4b5e222 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -52,6 +52,7 @@ config ADIS16480
 	  ADIS16485, ADIS16488 inertial sensors.
 
 source "drivers/iio/imu/bmi160/Kconfig"
+source "drivers/iio/imu/bno055/Kconfig"
 
 config FXOS8700
 	tristate
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index c82748096c77..6eb612034722 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
 obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
 
 obj-y += bmi160/
+obj-y += bno055/
 
 obj-$(CONFIG_FXOS8700) += fxos8700_core.o
 obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
new file mode 100644
index 000000000000..d197310661af
--- /dev/null
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config BOSH_BNO055_IIO
+	tristate
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
new file mode 100644
index 000000000000..c55741d0e96f
--- /dev/null
+++ b/drivers/iio/imu/bno055/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_BOSH_BNO055_IIO) += bno055.o
diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c
new file mode 100644
index 000000000000..c85cb985f0f1
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.c
@@ -0,0 +1,1480 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO driver for Bosh BNO055 IMU
+ *
+ * Copyright (C) 2021 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@....it>
+ *
+ * Portions of this driver are taken from the BNO055 driver patch
+ * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation.
+ *
+ * This driver is also based on BMI160 driver, which is:
+ *	Copyright (c) 2016, Intel Corporation.
+ *	Copyright (c) 2019, Martin Kelly.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+
+#include "bno055.h"
+
+#define BNO055_FW_NAME "bno055-caldata"
+#define BNO055_FW_EXT ".dat"
+#define BNO055_FW_UID_NAME BNO055_FW_NAME "-%*phN" BNO055_FW_EXT
+#define BNO055_FW_GENERIC_NAME (BNO055_FW_NAME BNO055_FW_EXT)
+
+/* common registers */
+#define BNO055_PAGESEL_REG		0x7
+
+/* page 0 registers */
+#define BNO055_CHIP_ID_REG		0x0
+#define BNO055_CHIP_ID_MAGIC 0xA0
+#define BNO055_SW_REV_LSB_REG		0x4
+#define BNO055_SW_REV_MSB_REG		0x5
+#define BNO055_ACC_DATA_X_LSB_REG	0x8
+#define BNO055_ACC_DATA_Y_LSB_REG	0xA
+#define BNO055_ACC_DATA_Z_LSB_REG	0xC
+#define BNO055_MAG_DATA_X_LSB_REG	0xE
+#define BNO055_MAG_DATA_Y_LSB_REG	0x10
+#define BNO055_MAG_DATA_Z_LSB_REG	0x12
+#define BNO055_GYR_DATA_X_LSB_REG	0x14
+#define BNO055_GYR_DATA_Y_LSB_REG	0x16
+#define BNO055_GYR_DATA_Z_LSB_REG	0x18
+#define BNO055_EUL_DATA_X_LSB_REG	0x1A
+#define BNO055_EUL_DATA_Y_LSB_REG	0x1C
+#define BNO055_EUL_DATA_Z_LSB_REG	0x1E
+#define BNO055_QUAT_DATA_W_LSB_REG	0x20
+#define BNO055_LIA_DATA_X_LSB_REG	0x28
+#define BNO055_LIA_DATA_Y_LSB_REG	0x2A
+#define BNO055_LIA_DATA_Z_LSB_REG	0x2C
+#define BNO055_GRAVITY_DATA_X_LSB_REG	0x2E
+#define BNO055_GRAVITY_DATA_Y_LSB_REG	0x30
+#define BNO055_GRAVITY_DATA_Z_LSB_REG	0x32
+#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2)
+#define BNO055_TEMP_REG			0x34
+#define BNO055_CALIB_STAT_REG		0x35
+#define BNO055_CALIB_STAT_MASK GENMASK(1, 0)
+#define BNO055_CALIB_STAT_MAGN_SHIFT 0
+#define BNO055_CALIB_STAT_ACCEL_SHIFT 2
+#define BNO055_CALIB_STAT_GYRO_SHIFT 4
+#define BNO055_CALIB_STAT_SYS_SHIFT 6
+#define BNO055_SYS_ERR_REG		0x3A
+#define BNO055_SYS_TRIGGER_REG		0x3F
+#define BNO055_SYS_TRIGGER_RST_INT BIT(6)
+#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7)
+#define BNO055_OPR_MODE_REG		0x3D
+#define BNO055_OPR_MODE_CONFIG 0x0
+#define BNO055_OPR_MODE_AMG 0x7
+#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB
+#define BNO055_OPR_MODE_FUSION 0xC
+#define BNO055_UNIT_SEL_REG		0x3B
+/* Android orientation mode means: pitch value decreases turning clockwise */
+#define BNO055_UNIT_SEL_ANDROID BIT(7)
+#define BNO055_CALDATA_START		0x55
+#define BNO055_CALDATA_END		0x6A
+#define BNO055_CALDATA_LEN 22
+
+/*
+ * The difference in address between the register that contains the
+ * value and the register that contains the offset.  This applies for
+ * accel, gyro and magn channels.
+ */
+#define BNO055_REG_OFFSET_ADDR		0x4D
+
+/* page 1 registers */
+#define PG1(x) ((x) | 0x80)
+#define BNO055_ACC_CONFIG_REG		PG1(0x8)
+#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2)
+#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0)
+#define BNO055_MAG_CONFIG_REG		PG1(0x9)
+#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18
+#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_REG		PG1(0xA)
+#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3)
+#define BNO055_GYR_AM_SET_REG		PG1(0x1F)
+#define BNO055_UID_LOWER_REG		PG1(0x50)
+#define BNO055_UID_HIGHER_REG		PG1(0x5F)
+#define BNO055_UID_LEN 16
+
+static const int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30};
+/* the following one is INT_PLUS_MICRO */
+static const int bno055_acc_lpf_vals[] = {7, 810000, 15, 630000,
+					  31, 250000, 62, 500000, 125, 0,
+					  250, 0, 500, 0, 1000, 0};
+static const int bno055_acc_ranges[] = {2, 4, 8, 16};
+static const int bno055_gyr_lpf_vals[] = {523, 230, 116, 47, 23, 12, 64, 32};
+static const int bno055_gyr_ranges[] = {2000, 1000, 500, 250, 125};
+
+struct bno055_priv {
+	struct regmap *regmap;
+	struct device *dev;
+	struct clk *clk;
+	int operation_mode;
+	int xfer_burst_break_thr;
+	struct mutex lock;
+	u8 uid[BNO055_UID_LEN];
+	struct {
+		__le16 chans[BNO055_SCAN_CH_COUNT];
+		s64 timestamp __aligned(8);
+	} buf;
+};
+
+static bool bno055_regmap_volatile(struct device *dev, unsigned int reg)
+{
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return true;
+
+	/* when in fusion mode, config is updated by chip */
+	if (reg == BNO055_MAG_CONFIG_REG ||
+	    reg == BNO055_ACC_CONFIG_REG ||
+	    reg == BNO055_GYR_CONFIG_REG)
+		return true;
+
+	/* calibration data may be updated by the IMU */
+	if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END)
+		return true;
+	return false;
+}
+
+static bool bno055_regmap_readable(struct device *dev, unsigned int reg)
+{
+	/* unnamed PG0 reserved areas */
+	if ((reg < PG1(0) && reg > BNO055_CALDATA_END) ||
+	    reg == 0x3C)
+		return false;
+
+	/* unnamed PG1 reserved areas */
+	if (reg > PG1(BNO055_UID_HIGHER_REG) ||
+	    (reg < PG1(BNO055_UID_LOWER_REG) && reg > PG1(BNO055_GYR_AM_SET_REG)) ||
+	    reg == PG1(0xE) ||
+	    (reg < PG1(BNO055_PAGESEL_REG) && reg >= PG1(0x0)))
+		return false;
+	return true;
+}
+
+static bool bno055_regmap_writeable(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Unreadable registers are indeed reserved; there are no WO regs
+	 * (except for a single bit in SYS_TRIGGER register)
+	 */
+	if (!bno055_regmap_readable(dev, reg))
+		return false;
+
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return false;
+
+	/* IDs areas */
+	if (reg < BNO055_PAGESEL_REG ||
+	    (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG))
+		return false;
+
+	return true;
+}
+
+static const struct regmap_range_cfg bno055_regmap_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 0x7f * 2,
+		.selector_reg = BNO055_PAGESEL_REG,
+		.selector_mask = GENMASK(7, 0),
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 0x80
+	},
+};
+
+const struct regmap_config bno055_regmap_config = {
+	.name = "bno055",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = bno055_regmap_ranges,
+	.num_ranges = 1,
+	.volatile_reg = bno055_regmap_volatile,
+	.max_register = 0x80 * 2,
+	.writeable_reg = bno055_regmap_writeable,
+	.readable_reg = bno055_regmap_readable,
+	.cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_GPL(bno055_regmap_config);
+
+static int bno055_reg_update_bits(struct bno055_priv *priv, unsigned int reg,
+				  unsigned int mask, unsigned int val)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap, reg, mask, val);
+	if (ret && ret != -ERESTARTSYS) {
+		dev_err(priv->dev, "Regmap update_bits  error. adr: 0x%x, ret: %d",
+			reg,  ret);
+	}
+
+	return ret;
+}
+
+/* must be called in configuration mode */
+int bno055_calibration_load(struct bno055_priv *priv, const struct firmware *fw)
+{
+	if (fw->size != BNO055_CALDATA_LEN) {
+		dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)",
+			fw->size, BNO055_CALDATA_LEN);
+		return -EINVAL;
+	}
+
+	dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, fw->data);
+	return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START,
+				fw->data, BNO055_CALDATA_LEN);
+}
+
+static int bno055_init(struct bno055_priv *priv, const struct firmware *caldata)
+{
+	int ret;
+
+	ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+			   (priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0) |
+			   BNO055_SYS_TRIGGER_RST_INT);
+	if (ret)
+		return ret;
+
+	msleep(100);
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	/* use standard SI units */
+	ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG,
+			   BNO055_UNIT_SEL_ANDROID);
+	if (ret)
+		return ret;
+
+	if (caldata) {
+		ret = bno055_calibration_load(priv, caldata);
+		if (ret)
+			dev_warn(priv->dev, "failed to load calibration data with error %d",
+				 ret);
+	}
+
+	priv->operation_mode = BNO055_OPR_MODE_FUSION;
+	return regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			    priv->operation_mode);
+}
+
+static void bno055_uninit(void *arg)
+{
+	struct bno055_priv *priv = arg;
+
+	/* stop the IMU */
+	regmap_write(priv->regmap, BNO055_OPR_MODE_REG, BNO055_OPR_MODE_CONFIG);
+}
+
+static void bno055_clk_disable(void *arg)
+{
+	struct bno055_priv *priv = arg;
+
+	clk_disable_unprepare(priv->clk);
+}
+
+#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) {	\
+	.address = _address,							\
+	.type = _type,								\
+	.modified = 1,								\
+	.channel2 = IIO_MOD_##_axis,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh),		\
+	.info_mask_shared_by_type_available = _avail,				\
+	.scan_index = _index,							\
+	.scan_type = {								\
+		.sign = 's',							\
+		.realbits = 16,							\
+		.storagebits = 16,						\
+		.endianness = IIO_LE,						\
+		.repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0		\
+	},									\
+}
+
+/* scan indexes follow DATA register order */
+enum bmi160_scan_axis {
+	BNO055_SCAN_ACCEL_X,
+	BNO055_SCAN_ACCEL_Y,
+	BNO055_SCAN_ACCEL_Z,
+	BNO055_SCAN_MAGN_X,
+	BNO055_SCAN_MAGN_Y,
+	BNO055_SCAN_MAGN_Z,
+	BNO055_SCAN_GYRO_X,
+	BNO055_SCAN_GYRO_Y,
+	BNO055_SCAN_GYRO_Z,
+	BNO055_SCAN_YAW,
+	BNO055_SCAN_ROLL,
+	BNO055_SCAN_PITCH,
+	BNO055_SCAN_QUATERNION,
+	BNO055_SCAN_LIA_X,
+	BNO055_SCAN_LIA_Y,
+	BNO055_SCAN_LIA_Z,
+	BNO055_SCAN_GRAVITY_X,
+	BNO055_SCAN_GRAVITY_Y,
+	BNO055_SCAN_GRAVITY_Z,
+	BNO055_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec bno055_channels[] = {
+	/* accelerometer */
+	BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X,
+		       BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y,
+		       BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z,
+		       BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	/* gyroscope */
+	BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X,
+		       BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y,
+		       BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z,
+		       BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	/* magnetometer */
+	BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X,
+		       BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y,
+		       BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z,
+		       BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	/* euler angle */
+	BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW,
+		       BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL,
+		       BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH,
+		       BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0),
+	/* quaternion */
+	BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION,
+		       BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0),
+
+	/* linear acceleration */
+	BNO055_CHANNEL(IIO_ACCEL, ACCEL_LINEAR_X, BNO055_SCAN_LIA_X,
+		       BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, ACCEL_LINEAR_Y, BNO055_SCAN_LIA_Y,
+		       BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, ACCEL_LINEAR_Z, BNO055_SCAN_LIA_Z,
+		       BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0),
+
+	/* gravity vector */
+	BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X,
+		       BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y,
+		       BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z,
+		       BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0),
+
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP),
+};
+
+static int bno055_get_acc_lpf(struct bno055_priv *priv, int *val, int *val2)
+{
+	const int shift = __ffs(BNO055_ACC_CONFIG_LPF_MASK);
+	int hwval, idx;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_ACC_CONFIG_REG, &hwval);
+	if (ret)
+		return ret;
+
+	idx = (hwval & BNO055_ACC_CONFIG_LPF_MASK) >> shift;
+	*val = bno055_acc_lpf_vals[idx * 2];
+	*val2 = bno055_acc_lpf_vals[idx * 2 + 1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int bno055_set_acc_lpf(struct bno055_priv *priv, int val, int val2)
+{
+	const int shift = __ffs(BNO055_ACC_CONFIG_LPF_MASK);
+	int req_val = val * 1000 + val2 / 1000;
+	bool first = true;
+	int best_delta;
+	int best_idx;
+	int tbl_val;
+	int delta;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bno055_acc_lpf_vals) / 2; i++) {
+		tbl_val = bno055_acc_lpf_vals[i * 2] * 1000 +
+			bno055_acc_lpf_vals[i * 2 + 1] / 1000;
+		delta = abs(tbl_val - req_val);
+		if (first || delta < best_delta) {
+			best_delta = delta;
+			best_idx = i;
+			first = false;
+		}
+	}
+
+	/*
+	 * The closest value the HW supports is only one in fusion mode,
+	 * and it is autoselected, so don't do anything, just return OK,
+	 * as the closest possible value has been (virtually) selected
+	 */
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return 0;
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = bno055_reg_update_bits(priv, BNO055_ACC_CONFIG_REG,
+				     BNO055_ACC_CONFIG_LPF_MASK,
+				     best_idx << shift);
+
+	if (ret)
+		return ret;
+
+	return regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			    BNO055_OPR_MODE_AMG);
+}
+
+static int bno055_get_regmask(struct bno055_priv *priv, int *val, int reg,
+			      int mask,  const int tbl[])
+{
+	const int shift = __ffs(mask);
+	int hwval, idx;
+	int ret;
+
+	ret = regmap_read(priv->regmap, reg, &hwval);
+	if (ret)
+		return ret;
+
+	idx = (hwval & mask) >> shift;
+	*val = tbl[idx];
+
+	return IIO_VAL_INT;
+}
+
+static int bno055_set_regmask(struct bno055_priv *priv, int val, int reg,
+			      int mask, const int table[], int table_len)
+
+{
+	int hwval = find_closest_unsorted(val, table, table_len);
+	const int shift = __ffs(mask);
+	int ret;
+	/*
+	 * The closest value the HW supports is only one in fusion mode,
+	 * and it is autoselected, so don't do anything, just return OK,
+	 * as the closest possible value has been (virtually) selected
+	 */
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return 0;
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = bno055_reg_update_bits(priv, reg, mask, hwval << shift);
+
+	if (ret)
+		return ret;
+
+	return regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			    BNO055_OPR_MODE_AMG);
+}
+
+#define bno055_get_mag_odr(p, v) \
+	bno055_get_regmask(p, v, \
+			   BNO055_MAG_CONFIG_REG, BNO055_MAG_CONFIG_ODR_MASK, \
+			   bno055_mag_odr_vals)
+
+#define bno055_set_mag_odr(p, v) \
+	bno055_set_regmask(p, v, \
+			   BNO055_MAG_CONFIG_REG, BNO055_MAG_CONFIG_ODR_MASK, \
+			   bno055_mag_odr_vals, \
+			   ARRAY_SIZE(bno055_mag_odr_vals))
+
+#define bno055_get_acc_range(p, v) \
+	bno055_get_regmask(priv, v, \
+			   BNO055_ACC_CONFIG_REG, BNO055_ACC_CONFIG_RANGE_MASK, \
+			   bno055_acc_ranges)
+
+#define bno055_set_acc_range(p, v) \
+	bno055_set_regmask(p, v, \
+			   BNO055_ACC_CONFIG_REG, \
+			   BNO055_ACC_CONFIG_RANGE_MASK,  \
+			   bno055_acc_ranges, ARRAY_SIZE(bno055_acc_ranges))
+
+#define bno055_get_gyr_lpf(p, v) \
+	bno055_get_regmask(p, v, \
+			   BNO055_GYR_CONFIG_REG, BNO055_GYR_CONFIG_LPF_MASK, \
+			   bno055_gyr_lpf_vals)
+
+#define bno055_set_gyr_lpf(p, v) \
+	bno055_set_regmask(p, v, \
+			   BNO055_GYR_CONFIG_REG, BNO055_GYR_CONFIG_LPF_MASK, \
+			   bno055_gyr_lpf_vals, \
+			   ARRAY_SIZE(bno055_gyr_lpf_vals))
+
+#define bno055_get_gyr_range(p, v) \
+	bno055_get_regmask(p, v, \
+			   BNO055_GYR_CONFIG_REG, BNO055_GYR_CONFIG_RANGE_MASK, \
+			   bno055_gyr_ranges)
+
+#define bno055_set_gyr_range(p, v) \
+	bno055_set_regmask(p, v, \
+			   BNO055_GYR_CONFIG_REG, \
+			   BNO055_GYR_CONFIG_RANGE_MASK, \
+			   bno055_gyr_ranges, ARRAY_SIZE(bno055_gyr_ranges))
+
+static int bno055_read_simple_chan(struct iio_dev *indio_dev,
+				   struct iio_chan_spec const *chan,
+				   int *val, int *val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_val;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_bulk_read(priv->regmap, chan->address,
+				       &raw_val, sizeof(raw_val));
+		if (ret < 0)
+			return ret;
+		*val = (s16)le16_to_cpu(raw_val);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+			*val = 0;
+		} else {
+			ret = regmap_bulk_read(priv->regmap,
+					       chan->address +
+					       BNO055_REG_OFFSET_ADDR,
+					       &raw_val, sizeof(raw_val));
+			if (ret < 0)
+				return ret;
+			/*
+			 * IMU reports sensor offests; IIO wants correction
+			 * offset, thus we need the 'minus' here.
+			 */
+			*val = -(s16)le16_to_cpu(raw_val);
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;
+		switch (chan->type) {
+		case IIO_GRAVITY:
+			/* Table 3-35: 1 m/s^2 = 100 LSB */
+		case IIO_ACCEL:
+			/* Table 3-17: 1 m/s^2 = 100 LSB */
+			*val2 = 100;
+			break;
+		case IIO_MAGN:
+			/*
+			 * Table 3-19: 1 uT = 16 LSB.  But we need
+			 * Gauss: 1G = 0.1 uT.
+			 */
+			*val2 = 160;
+			break;
+		case IIO_ANGL_VEL:
+			/* Table 3-22: 1 Rps = 900 LSB */
+			*val2 = 900;
+			break;
+		case IIO_ROT:
+			/* Table 3-28: 1 degree = 16 LSB */
+			*val2 = 16;
+			break;
+		default:
+			return -EINVAL;
+		}
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_MAGN)
+			return -EINVAL;
+		else
+			return bno055_get_mag_odr(priv, val);
+
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return bno055_get_gyr_lpf(priv, val);
+		case IIO_ACCEL:
+			return bno055_get_acc_lpf(priv, val, val2);
+		default:
+			return -EINVAL;
+		}
+	}
+}
+
+static int bno055_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+				/* locked on 32 */
+				*vals = bno055_gyr_lpf_vals + 7;
+				*length = 1;
+			} else {
+				*vals = bno055_gyr_lpf_vals;
+				*length = ARRAY_SIZE(bno055_gyr_lpf_vals);
+			}
+			*type =  IIO_VAL_INT;
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		case IIO_ACCEL:
+			if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+				/* locked on 62.5Hz  */
+				*vals = bno055_acc_lpf_vals + 6;
+				*length = 2;
+			} else {
+				*vals = bno055_acc_lpf_vals;
+				*length = ARRAY_SIZE(bno055_acc_lpf_vals);
+			}
+			*type = IIO_VAL_INT_PLUS_MICRO;
+			return IIO_AVAIL_LIST;
+		}
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_MAGN:
+			if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+				/* locked on 20Hz */
+				*vals = bno055_mag_odr_vals + 5;
+				*length = 1;
+			} else {
+				*vals = bno055_mag_odr_vals;
+				*length = ARRAY_SIZE(bno055_mag_odr_vals);
+			}
+			*type =  IIO_VAL_INT;
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	unsigned int raw_val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C.
+	 * ABI wants milliC.
+	 */
+	*val = raw_val * 1000;
+
+	return IIO_VAL_INT;
+}
+
+static int bno055_read_quaternion(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_vals[4];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (size < 4)
+			return -EINVAL;
+		ret = regmap_bulk_read(priv->regmap,
+				       BNO055_QUAT_DATA_W_LSB_REG,
+				       raw_vals, sizeof(raw_vals));
+		if (ret < 0)
+			return ret;
+		for (i = 0; i < 4; i++)
+			vals[i] = (s16)le16_to_cpu(raw_vals[i]);
+		*val_len = 4;
+		return IIO_VAL_INT_MULTIPLE;
+	case IIO_CHAN_INFO_SCALE:
+		/* Table 3-31: 1 quaternion = 2^14 LSB */
+		if (size < 2)
+			return -EINVAL;
+		vals[0] = 1;
+		vals[1] = 1 << 14;
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int _bno055_read_raw_multi(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	switch (chan->type) {
+	case IIO_MAGN:
+	case IIO_ACCEL:
+	case IIO_ANGL_VEL:
+	case IIO_GRAVITY:
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	case IIO_TEMP:
+		*val_len = 1;
+		return bno055_read_temp_chan(indio_dev, &vals[0]);
+	case IIO_ROT:
+		/*
+		 * Rotation is exposed as either a quaternion or three
+		 * Euler angles.
+		 */
+		if (chan->channel2 == IIO_MOD_QUATERNION)
+			return bno055_read_quaternion(indio_dev, chan,
+						      size, vals,
+						      val_len, mask);
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_raw_multi(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int size, int *vals, int *val_len,
+				 long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_read_raw_multi(indio_dev, chan, size,
+				     vals, val_len, mask);
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int _bno055_write_raw(struct iio_dev *iio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	switch (chan->type) {
+	case IIO_MAGN:
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return bno055_set_mag_odr(priv, val);
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_ACCEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_acc_lpf(priv, val, val2);
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_ANGL_VEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_gyr_lpf(priv, val);
+
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_write_raw(struct iio_dev *iio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_write_raw(iio_dev, chan, val, val2, mask);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static ssize_t in_accel_range_available_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%s\n",
+			  priv->operation_mode != BNO055_OPR_MODE_AMG ? "4" :
+			 "2 4 8 16");
+}
+
+static ssize_t in_anglvel_range_available_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%s\n",
+			 (priv->operation_mode != BNO055_OPR_MODE_AMG) ? "2000" :
+			 "125 250 500 1000 2000");
+}
+
+static ssize_t bno055_operation_mode_set(struct bno055_priv *priv,
+					 int operation_mode)
+{
+	int ret;
+
+	mutex_lock(&priv->lock);
+	priv->operation_mode = operation_mode;
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   BNO055_OPR_MODE_CONFIG);
+	if (ret) {
+		mutex_unlock(&priv->lock);
+		return ret;
+	}
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG, priv->operation_mode);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static ssize_t bno055_fusion_enable_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode != BNO055_OPR_MODE_AMG);
+}
+
+static ssize_t bno055_fusion_enable_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int ret = 0;
+
+	if (sysfs_streq(buf, "0")) {
+		ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG);
+	} else {
+		/*
+		 * Coming from AMG means the FMC was off, just switch to fusion
+		 * but don't change anything that doesn't belong to us (i.e let.
+		 * FMC stay off.
+		 * Coming from any other fusion mode means we don't need to do
+		 * anything.
+		 */
+		if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF);
+	}
+
+	return len ?: len;
+}
+
+static ssize_t bno055_fmc_enable_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode == BNO055_OPR_MODE_FUSION);
+}
+
+static ssize_t bno055_fmc_enable_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int ret = 0;
+
+	if (sysfs_streq(buf, "0")) {
+		if (priv->operation_mode == BNO055_OPR_MODE_FUSION)
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF);
+	} else {
+		if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+			return -EINVAL;
+	}
+
+	return len ?: ret;
+}
+
+static ssize_t bno055_in_accel_range_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int val;
+	int ret;
+
+	ret = bno055_get_acc_range(priv, &val);
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t bno055_in_accel_range_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_set_acc_range(priv, val);
+	mutex_unlock(&priv->lock);
+
+	return ret ?: len;
+}
+
+static ssize_t bno055_in_gyr_range_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int val;
+	int ret;
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	ret = bno055_get_gyr_range(priv, &val);
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t bno055_in_gyr_range_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_set_gyr_range(priv, val);
+	mutex_unlock(&priv->lock);
+
+	return ret ?: len;
+}
+
+static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	static const char * const calib_status[] = {
+		"bad", "barely enough", "fair", "good" };
+	const char *calib_str;
+	int ret;
+	int val;
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG ||
+	    (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF &&
+	     which == BNO055_CALIB_STAT_MAGN_SHIFT)) {
+		calib_str = "idle";
+	} else {
+		mutex_lock(&priv->lock);
+		ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val);
+		mutex_unlock(&priv->lock);
+
+		if (ret)
+			return -EIO;
+
+		val = (val >> which) & BNO055_CALIB_STAT_MASK;
+		calib_str = calib_status[val];
+	}
+
+	return sysfs_emit(buf, "%s\n", calib_str);
+}
+
+static ssize_t unique_id_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid);
+}
+
+static ssize_t in_calibration_data_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	u8 data[BNO055_CALDATA_LEN];
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto unlock;
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data,
+			       BNO055_CALDATA_LEN);
+	if (ret)
+		goto unlock;
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG, priv->operation_mode);
+	mutex_unlock(&priv->lock);
+	if (ret)
+		return ret;
+
+	memcpy(buf, data, BNO055_CALDATA_LEN);
+
+	return BNO055_CALDATA_LEN;
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static ssize_t in_autocalibration_status_sys_show(struct device *dev,
+						  struct device_attribute *a,
+						  char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT);
+}
+
+static ssize_t in_autocalibration_status_accel_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT);
+}
+
+static ssize_t in_autocalibration_status_gyro_show(struct device *dev,
+						   struct device_attribute *a,
+						   char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT);
+}
+
+static ssize_t in_autocalibration_status_magn_show(struct device *dev,
+						   struct device_attribute *a,
+						   char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT);
+}
+
+#ifdef CONFIG_DEBUG_FS
+int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+			      unsigned int writeval, unsigned int *readval)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	if (readval)
+		return regmap_read(priv->regmap, reg, readval);
+	else
+		return regmap_write(priv->regmap, reg, writeval);
+}
+
+static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf,
+				      size_t count, loff_t *ppos)
+{
+	struct bno055_priv *priv = file->private_data;
+	int rev, ver;
+	char *buf;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	buf = devm_kasprintf(priv->dev, GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n",
+			     ver, rev);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+	devm_kfree(priv->dev, buf);
+
+	return ret;
+}
+
+static const struct file_operations bno055_fw_version_ops = {
+	.open = simple_open,
+	.read = bno055_show_fw_version,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	debugfs_create_file("firmware_version", 0400,
+			    iio_get_debugfs_dentry(iio_dev), priv,
+			    &bno055_fw_version_ops);
+}
+#else
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+}
+
+int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+			      unsigned int writeval, unsigned int *readval)
+{
+	return 0;
+}
+#endif
+
+static IIO_DEVICE_ATTR(fusion_enable, 0644,
+		       bno055_fusion_enable_show,
+		       bno055_fusion_enable_store, 0);
+
+static IIO_DEVICE_ATTR(fast_magnetometer_calibration_enable, 0644,
+		       bno055_fmc_enable_show,
+		       bno055_fmc_enable_store, 0);
+
+static IIO_DEVICE_ATTR(in_accel_range, 0644,
+		       bno055_in_accel_range_show,
+		       bno055_in_accel_range_store, 0);
+
+static IIO_DEVICE_ATTR_RO(in_accel_range_available, 0);
+
+static IIO_DEVICE_ATTR(in_anglvel_range, 0644,
+		       bno055_in_gyr_range_show,
+		       bno055_in_gyr_range_store, 0);
+
+static IIO_DEVICE_ATTR_RO(in_anglvel_range_available, 0);
+
+static IIO_DEVICE_ATTR_RO(in_autocalibration_status_sys, 0);
+static IIO_DEVICE_ATTR_RO(in_autocalibration_status_accel, 0);
+static IIO_DEVICE_ATTR_RO(in_autocalibration_status_gyro, 0);
+static IIO_DEVICE_ATTR_RO(in_autocalibration_status_magn, 0);
+static IIO_DEVICE_ATTR_RO(in_calibration_data, 0);
+
+static IIO_DEVICE_ATTR_RO(unique_id, 0);
+
+static struct attribute *bno055_attrs[] = {
+	&iio_dev_attr_in_accel_range_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_range.dev_attr.attr,
+	&iio_dev_attr_in_anglvel_range_available.dev_attr.attr,
+	&iio_dev_attr_in_anglvel_range.dev_attr.attr,
+	&iio_dev_attr_fusion_enable.dev_attr.attr,
+	&iio_dev_attr_fast_magnetometer_calibration_enable.dev_attr.attr,
+	&iio_dev_attr_in_autocalibration_status_sys.dev_attr.attr,
+	&iio_dev_attr_in_autocalibration_status_accel.dev_attr.attr,
+	&iio_dev_attr_in_autocalibration_status_gyro.dev_attr.attr,
+	&iio_dev_attr_in_autocalibration_status_magn.dev_attr.attr,
+	&iio_dev_attr_in_calibration_data.dev_attr.attr,
+	&iio_dev_attr_unique_id.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group bno055_attrs_group = {
+	.attrs = bno055_attrs,
+};
+
+static const struct iio_info bno055_info = {
+	.read_raw_multi = bno055_read_raw_multi,
+	.read_avail = bno055_read_avail,
+	.write_raw = bno055_write_raw,
+	.attrs = &bno055_attrs_group,
+	.debugfs_reg_access = bno055_debugfs_reg_access,
+};
+
+/*
+ * Reads len samples from the HW, stores them in buf starting from buf_idx,
+ * and applies mask to cull (skip) unneeded samples.
+ * Updates buf_idx incrementing with the number of stored samples.
+ * Samples from HW are transferred into buf, then in-place copy on buf is
+ * performed in order to cull samples that need to be skipped.
+ * This avoids copies of the first samples until we hit the 1st sample to skip,
+ * and also avoids having an extra bounce buffer.
+ * buf must be able to contain len elements in spite of how many samples we are
+ * going to cull.
+ */
+static int bno055_scan_xfer(struct bno055_priv *priv,
+			    int start_ch, int len, unsigned long mask,
+			    __le16 *buf, int *buf_idx)
+{
+	const int base = BNO055_ACC_DATA_X_LSB_REG;
+	bool quat_in_read = false;
+	int buf_base = *buf_idx;
+	__le16 *dst, *src;
+	int offs_fixup = 0;
+	int xfer_len = len;
+	int ret;
+	int i, n;
+
+	/*
+	 * All chans are made up 1 16-bit sample, except for quaternion that is
+	 * made up 4 16-bit values.
+	 * For us the quaternion CH is just like 4 regular CHs.
+	 * If our read starts past the quaternion make sure to adjust the
+	 * starting offset; if the quaternion is contained in our scan then make
+	 * sure to adjust the read len.
+	 */
+	if (start_ch > BNO055_SCAN_QUATERNION) {
+		start_ch += 3;
+	} else if ((start_ch <= BNO055_SCAN_QUATERNION) &&
+		 ((start_ch + len) > BNO055_SCAN_QUATERNION)) {
+		quat_in_read = true;
+		xfer_len += 3;
+	}
+
+	ret = regmap_bulk_read(priv->regmap,
+			       base + start_ch * sizeof(__le16),
+			       buf + buf_base,
+			       xfer_len * sizeof(__le16));
+	if (ret)
+		return ret;
+
+	for_each_set_bit(i, &mask, len) {
+		if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION))
+			offs_fixup = 3;
+
+		dst = buf + *buf_idx;
+		src = buf + buf_base + offs_fixup + i;
+
+		n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1;
+
+		if (dst != src)
+			memcpy(dst, src, n * sizeof(__le16));
+
+		*buf_idx += n;
+	}
+	return 0;
+}
+
+static irqreturn_t bno055_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio_dev = pf->indio_dev;
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int xfer_start, start, end, prev_end;
+	bool xfer_pending = false;
+	bool first = true;
+	unsigned long mask;
+	int buf_idx = 0;
+	bool thr_hit;
+	int quat;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	for_each_set_bitrange(start, end, iio_dev->active_scan_mask,
+			      iio_dev->masklength) {
+		if (!xfer_pending)
+			xfer_start = start;
+		xfer_pending = true;
+
+		if (!first) {
+			quat = ((start > BNO055_SCAN_QUATERNION) &&
+				(prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0;
+			thr_hit = (start - prev_end + quat) >
+				priv->xfer_burst_break_thr;
+
+			if (thr_hit) {
+				mask = *iio_dev->active_scan_mask >> xfer_start;
+				ret = bno055_scan_xfer(priv, xfer_start,
+						       prev_end - xfer_start + 1,
+						       mask, priv->buf.chans, &buf_idx);
+				if (ret)
+					goto done;
+				xfer_pending = false;
+			}
+			first = false;
+		}
+		prev_end = end;
+	}
+
+	if (xfer_pending) {
+		mask = *iio_dev->active_scan_mask >> xfer_start;
+		ret = bno055_scan_xfer(priv, xfer_start,
+				       end - xfer_start + 1,
+				       mask, priv->buf.chans, &buf_idx);
+	}
+
+	iio_push_to_buffers_with_timestamp(iio_dev, &priv->buf, pf->timestamp);
+done:
+	mutex_unlock(&priv->lock);
+	iio_trigger_notify_done(iio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr)
+{
+	const struct firmware *caldata;
+	struct bno055_priv *priv;
+	struct iio_dev *iio_dev;
+	struct gpio_desc *rst;
+	char *fw_name_buf;
+	unsigned int val;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	iio_dev->name = "bno055";
+	priv = iio_priv(iio_dev);
+	mutex_init(&priv->lock);
+	priv->regmap = regmap;
+	priv->dev = dev;
+	priv->xfer_burst_break_thr = xfer_burst_break_thr;
+	rst = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(rst))
+		return dev_err_probe(dev, PTR_ERR(rst), "Failed to get reset GPIO");
+
+	priv->clk = devm_clk_get_optional(dev, "clk");
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK");
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bno055_clk_disable, priv);
+	if (ret)
+		return ret;
+
+	if (rst) {
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(rst, 0);
+		usleep_range(650000, 750000);
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val);
+	if (ret)
+		return ret;
+
+	if (val != BNO055_CHIP_ID_MAGIC) {
+		dev_err(dev, "Unrecognized chip ID 0x%x", val);
+		return -ENODEV;
+	}
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG,
+			       priv->uid, BNO055_UID_LEN);
+	if (ret)
+		return ret;
+
+	/*
+	 * This has nothing to do with the IMU firmware, this is for sensor
+	 * calibration data.
+	 */
+	fw_name_buf = devm_kasprintf(dev, GFP_KERNEL,
+				     BNO055_FW_UID_NAME,
+				     BNO055_UID_LEN, priv->uid);
+	if (!fw_name_buf)
+		return -ENOMEM;
+
+	ret = request_firmware(&caldata, fw_name_buf, dev);
+	devm_kfree(dev, fw_name_buf);
+	if (ret)
+		ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev);
+
+	if (ret) {
+		dev_notice(dev, "Failed to load calibration data firmware file; this has nothing to do with IMU main firmware.\nYou can calibrate your IMU (look for 'in_autocalibration_status*' files in sysfs) and then copy 'in_calibration_data' to your firmware file");
+		caldata = NULL;
+	}
+
+	ret = bno055_init(priv, caldata);
+	if (caldata)
+		release_firmware(caldata);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bno055_uninit, priv);
+	if (ret)
+		return ret;
+
+	iio_dev->channels = bno055_channels;
+	iio_dev->num_channels = ARRAY_SIZE(bno055_channels);
+	iio_dev->info = &bno055_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_iio_triggered_buffer_setup(dev, iio_dev,
+					      iio_pollfunc_store_time,
+					      bno055_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, iio_dev);
+	if (ret)
+		return ret;
+
+	bno055_debugfs_init(iio_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bno055_probe);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@....it>");
+MODULE_DESCRIPTION("Bosch BNO055 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h
new file mode 100644
index 000000000000..7ad8da1ffbf0
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __BNO055_H__
+#define __BNO055_H__
+
+#include <linux/regmap.h>
+
+struct device;
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr);
+extern const struct regmap_config bno055_regmap_config;
+
+#endif
-- 
2.17.1

Powered by blists - more mailing lists