[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1635385599-17778-1-git-send-email-hayashi.kunihiko@socionext.com>
Date: Thu, 28 Oct 2021 10:46:39 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Masami Hiramatsu <mhiramat@...nel.org>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH v2] dt-bindings: pinctrl: uniphier: Add child node definitions to describe pin mux and configuration
In arch/arm/boot/dts/uniphier-pinctrl.dtsi, there are child nodes of
pinctrl that defines pinmux and pincfg, however, there are no rules about
that in dt-bindings.
'make dtbs_check' results an error with the following message:
pinctrl: 'ain1', 'ain2', 'ainiec1', 'aout', 'aout1', 'aout2', ...
... 'usb2', 'usb3' do not match any of the regexes: 'pinctrl-[0-9]+'
To avoid this issue, add the rules of pinmux and pincfg in each child node
and grandchild node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
Changes since v1:
- Replace additionalProperties with unevaluatedProperties
- Add additionalProperties for child and grandchild nodes
.../pinctrl/socionext,uniphier-pinctrl.yaml | 50 +++++++++++++++++++++-
1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index a804d9bc1602..7e504e003181 100644
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -26,10 +26,58 @@ properties:
- socionext,uniphier-pxs3-pinctrl
- socionext,uniphier-nx1-pinctrl
+additionalProperties:
+ type: object
+
+patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-strength: true
+
+ additionalProperties:
+ type: object
+
+ patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-strength: true
+
+ unevaluatedProperties: false
+
+ unevaluatedProperties: false
+
required:
- compatible
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
--
2.7.4
Powered by blists - more mailing lists