[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <28833c69-9a51-fb14-7ba5-bcb71e88ca14@redhat.com>
Date: Fri, 29 Oct 2021 09:40:56 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Cc: linuxarm@...wei.com, mauro.chehab@...wei.com,
Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] mfd: Kconfig: change INTEL_SOC_PMIC_CHTDC_TI to bool
Hi,
On 10/29/21 09:02, Mauro Carvalho Chehab wrote:
> The INTEL_SOC_PMIC_CHTDC_TI should be initialized early, before
> loading the fbcon driver, as otherwise the i915 driver will
> fail to configure pwm:
>
> [ 13.674287] fb0: switching to inteldrmfb from EFI VGA
> [ 13.682380] Console: switching to colour dummy device 80x25
> [ 13.682468] i915 0000:00:02.0: vgaarb: deactivate vga console
> [ 13.682686] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 13.685773] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 13.686219] i915 0000:00:02.0: [drm] *ERROR* Failed to configure the pwm chip
> [ 13.699572] [drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
> [ 13.739044] fbcon: i915drmfb (fb0) is primary device
> [ 14.037792] intel_soc_pmic_exec_mipi_pmic_seq_element: No PMIC registered
> ...
> [ 24.621403] intel_pmic_install_opregion_handler: Ask to register OpRegion for bus ID=PMI2, HID=INT33F5
> [ 24.630540] intel_pmic_install_opregion_handler: OpRegion registered
>
> (some extra debug printk's were added to the above)
>
> As suggested by Hans, this patch also addresses an issue with
> the dependencies, as, for this driver to be a bool, it also
> need the I2C core and the I2C_DESIGNWARE driver to be builtin.
>
> Suggested-by: Hans de Goede <hdegoede@...hat.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
Regards,
Hans
> ---
> drivers/mfd/Kconfig | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ca0edab91aeb..f9092c79c4e8 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -632,7 +632,7 @@ config INTEL_SOC_PMIC_CHTWC
> config INTEL_SOC_PMIC_CHTDC_TI
> tristate "Support for Intel Cherry Trail Dollar Cove TI PMIC"
> depends on GPIOLIB
> - depends on I2C
> + depends on I2C = y && I2C_DESIGNWARE_PLATFORM=y
> depends on ACPI
> depends on X86
> select MFD_CORE
> @@ -642,6 +642,10 @@ config INTEL_SOC_PMIC_CHTDC_TI
> Select this option for supporting Dollar Cove (TI version) PMIC
> device that is found on some Intel Cherry Trail systems.
>
> + This option is a bool as it provides an ACPI OpRegion which must be
> + available before any devices using it are probed. This option also
> + needs the designware-i2c driver to be builtin for the same reason.
> +
> config INTEL_SOC_PMIC_MRFLD
> tristate "Support for Intel Merrifield Basin Cove PMIC"
> depends on GPIOLIB
>
Powered by blists - more mailing lists