| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1635496955-13985-2-git-send-email-lh.kuo@sunplus.com>
Date: Fri, 29 Oct 2021 16:42:34 +0800
From: "LH.Kuo" <lhjeff911@...il.com>
To: p.zabel@...gutronix.de, robh+dt@...nel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org
Cc: dvorkin@...bo.com, qinjian@...lus1.com, wells.lu@...plus.com,
"LH.Kuo" <lh.kuo@...plus.com>
Subject: [PATCH 1/2] I2C: Add I2C driver for Sunplus SP7021
Add I2C driver for Sunplus SP7021.
Signed-off-by: LH.Kuo <lh.kuo@...plus.com>
---
MAINTAINERS | 38 +-
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-sunplus.c | 1936 ++++++++++++++++++++++++++++++++++++++
4 files changed, 1969 insertions(+), 16 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-sunplus.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 80eebc1..c89a3b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3553,7 +3553,7 @@ N: kona
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <hauke@...ke-m.de>
-M: Rafał Miłecki <zajec5@...il.com>
+M: Rafa? Mi?ecki <zajec5@...il.com>
L: linux-mips@...r.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/mips/brcm/
@@ -3561,7 +3561,7 @@ F: arch/mips/bcm47xx/*
F: arch/mips/include/asm/mach-bcm47xx/*
BROADCOM BCM4908 ETHERNET DRIVER
-M: Rafał Miłecki <rafal@...ecki.pl>
+M: Rafa? Mi?ecki <rafal@...ecki.pl>
M: bcm-kernel-feedback-list@...adcom.com
L: netdev@...r.kernel.org
S: Maintained
@@ -3571,7 +3571,7 @@ F: drivers/net/ethernet/broadcom/unimac.h
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@...ke-m.de>
-M: Rafał Miłecki <zajec5@...il.com>
+M: Rafa? Mi?ecki <zajec5@...il.com>
M: bcm-kernel-feedback-list@...adcom.com
L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -3581,7 +3581,7 @@ F: arch/arm/boot/dts/bcm953012*
F: arch/arm/mach-bcm/bcm_5301x.c
BROADCOM BCM53573 ARM ARCHITECTURE
-M: Rafał Miłecki <rafal@...ecki.pl>
+M: Rafa? Mi?ecki <rafal@...ecki.pl>
L: bcm-kernel-feedback-list@...adcom.com
L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -3800,7 +3800,7 @@ N: hr2
N: stingray
BROADCOM IPROC GBIT ETHERNET DRIVER
-M: Rafał Miłecki <rafal@...ecki.pl>
+M: Rafa? Mi?ecki <rafal@...ecki.pl>
M: bcm-kernel-feedback-list@...adcom.com
L: netdev@...r.kernel.org
S: Maintained
@@ -3835,13 +3835,13 @@ F: drivers/infiniband/hw/bnxt_re/
F: include/uapi/rdma/bnxt_re-abi.h
BROADCOM NVRAM DRIVER
-M: Rafał Miłecki <zajec5@...il.com>
+M: Rafa? Mi?ecki <zajec5@...il.com>
L: linux-mips@...r.kernel.org
S: Maintained
F: drivers/firmware/broadcom/*
BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
-M: Rafał Miłecki <rafal@...ecki.pl>
+M: Rafa? Mi?ecki <rafal@...ecki.pl>
M: Florian Fainelli <f.fainelli@...il.com>
M: bcm-kernel-feedback-list@...adcom.com
L: linux-pm@...r.kernel.org
@@ -3851,7 +3851,7 @@ F: drivers/soc/bcm/bcm63xx/bcm-pmb.c
F: include/dt-bindings/soc/bcm-pmb.h
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
-M: Rafał Miłecki <zajec5@...il.com>
+M: Rafa? Mi?ecki <zajec5@...il.com>
L: linux-wireless@...r.kernel.org
S: Maintained
F: drivers/bcma/
@@ -6947,7 +6947,7 @@ W: http://www.broadcom.com
F: drivers/scsi/elx/
ENE CB710 FLASH CARD READER DRIVER
-M: Michał Mirosław <mirq-linux@...e.qmqm.pl>
+M: Micha? Miros?aw <mirq-linux@...e.qmqm.pl>
S: Maintained
F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
@@ -7389,7 +7389,7 @@ F: include/uapi/video/
F: include/video/
FREESCALE CAAM (Cryptographic Acceleration and Assurance Module) DRIVER
-M: Horia Geantă <horia.geanta@....com>
+M: Horia Geant? <horia.geanta@....com>
M: Pankaj Gupta <pankaj.gupta@....com>
L: linux-crypto@...r.kernel.org
S: Maintained
@@ -7926,7 +7926,7 @@ F: fs/gfs2/
F: include/uapi/linux/gfs2_ondisk.h
GIGABYTE WMI DRIVER
-M: Thomas Weißschuh <thomas@...ssschuh.net>
+M: Thomas Wei?schuh <thomas@...ssschuh.net>
L: platform-driver-x86@...r.kernel.org
S: Maintained
F: drivers/platform/x86/gigabyte-wmi.c
@@ -8871,7 +8871,7 @@ S: Maintained
F: drivers/i2c/i2c-stub.c
I3C DRIVER FOR CADENCE I3C MASTER IP
-M: Przemysław Gaj <pgaj@...ence.com>
+M: Przemys?aw Gaj <pgaj@...ence.com>
S: Maintained
F: Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
F: drivers/i3c/master/i3c-master-cdns.c
@@ -14456,7 +14456,7 @@ F: drivers/pci/controller/pci-v3-semi.c
PCI ENDPOINT SUBSYSTEM
M: Kishon Vijay Abraham I <kishon@...com>
M: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
-R: Krzysztof Wilczyński <kw@...ux.com>
+R: Krzysztof Wilczy?ski <kw@...ux.com>
L: linux-pci@...r.kernel.org
S: Supported
F: Documentation/PCI/endpoint/*
@@ -14504,7 +14504,7 @@ F: drivers/pci/controller/pci-xgene-msi.c
PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
M: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
R: Rob Herring <robh@...nel.org>
-R: Krzysztof Wilczyński <kw@...ux.com>
+R: Krzysztof Wilczy?ski <kw@...ux.com>
L: linux-pci@...r.kernel.org
S: Supported
Q: http://patchwork.ozlabs.org/project/linux-pci/list/
@@ -16490,7 +16490,7 @@ F: Documentation/devicetree/bindings/rng/samsung,exynos4-rng.yaml
F: drivers/crypto/exynos-rng.c
SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER
-M: Łukasz Stelmach <l.stelmach@...sung.com>
+M: ?ukasz Stelmach <l.stelmach@...sung.com>
L: linux-samsung-soc@...r.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
@@ -16504,7 +16504,7 @@ F: drivers/video/fbdev/s3c-fb.c
SAMSUNG INTERCONNECT DRIVERS
M: Sylwester Nawrocki <s.nawrocki@...sung.com>
-M: Artur Świgoń <a.swigon@...sung.com>
+M: Artur ?wigo? <a.swigon@...sung.com>
L: linux-pm@...r.kernel.org
L: linux-samsung-soc@...r.kernel.org
S: Supported
@@ -17947,6 +17947,12 @@ L: netdev@...r.kernel.org
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c
+SUNPLUS I2C CONTROLLER INTERFACE DRIVER
+M: LH Kuo <lh.kuo@...plus.com>
+L: linux-i2c@...r.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-sunplus.c
+
SUPERH
M: Yoshinori Sato <ysato@...rs.sourceforge.jp>
M: Rich Felker <dalias@...c.org>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e17790f..a4d6074 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1371,6 +1371,16 @@ config SCx200_ACB
This support is also available as a module. If so, the module
will be called scx200_acb.
+config I2C_SUNPLUS
+ tristate "Sunplus I2C driver"
+ depends on SOC_SP7021 || SOC_Q645
+ help
+ Say Y here to include support for I2C controller in the
+ Sunplus SoCs.
+
+ This driver can also be built as a module. If so, the module will be
+ called as i2c-sunplus.
+
config I2C_OPAL
tristate "IBM OPAL I2C driver"
depends on PPC_POWERNV
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 1336b04..56ea06b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -146,5 +146,6 @@ obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_I2C_FSI) += i2c-fsi.o
obj-$(CONFIG_I2C_VIRTIO) += i2c-virtio.o
+obj-$(CONFIG_I2C_SUNPLUS) += i2c-sunplus.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-sunplus.c b/drivers/i2c/busses/i2c-sunplus.c
new file mode 100644
index 0000000..d7f2111
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sunplus.c
@@ -0,0 +1,1936 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021 Sunplus Inc.
+ * Author: LH Kuo <lh.kuo@...plus.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/dma-mapping.h>
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+#include <linux/pm_runtime.h>
+#endif
+
+
+//#define I2C_RETEST
+
+//#define I2C_FUNC_DEBUG
+//#define I2C_DBG_INFO
+#define I2C_DBG_ERR
+
+#ifdef I2C_FUNC_DEBUG
+ #define FUNC_DEBUG() pr_info("[I2C] Debug: %s(%d)\n", __func__, __LINE__)
+#else
+ #define FUNC_DEBUG()
+#endif
+
+#ifdef I2C_DBG_INFO
+ #define DBG_INFO(fmt, args ...) pr_info("[I2C] Info (%d): " fmt"\n", __LINE__, ## args)
+#else
+ #define DBG_INFO(fmt, args ...)
+#endif
+
+#ifdef I2C_DBG_ERR
+ #define DBG_ERR(fmt, args ...) pr_info("[I2C] Error (%d): " fmt"\n", __LINE__, ## args)
+#else
+ #define DBG_ERR(fmt, args ...)
+#endif
+
+#define I2C_FREQ 400
+#define I2C_SLEEP_TIMEOUT 200
+#define I2C_SCL_DELAY 1 //SCl dalay xT
+
+#define I2C_CLK_SOURCE_FREQ 27000 // KHz(27MHz)
+#define I2C_BUFFER_SIZE 1024 // Byte
+
+
+
+#define I2CM_REG_NAME "i2cm"
+
+#define DEVICE_NAME "sp7021-i2cm"
+
+#define I2CM_DMA_REG_NAME "i2cmdma"
+
+#define I2C_MASTER_NUM (4)
+
+//burst write use
+#define I2C_EMPTY_THRESHOLD_VALUE 4
+
+//burst read use
+#define I2C_IS_READ16BYTE
+
+#ifdef I2C_IS_READ16BYTE
+#define I2C_BURST_RDATA_BYTES 16
+#define I2C_BURST_RDATA_FLAG 0x80008000
+#else
+#define I2C_BURST_RDATA_BYTES 4
+#define I2C_BURST_RDATA_FLAG 0x88888888
+#endif
+
+#define I2C_BURST_RDATA_ALL_FLAG 0xFFFFFFFF
+
+
+//control0
+#define I2C_CTL0_FREQ(x) (x<<24) //bit[26:24]
+#define I2C_CTL0_PREFETCH (1<<18)
+#define I2C_CTL0_RESTART_EN (1<<17) //0:disable 1:enable
+#define I2C_CTL0_SUBADDR_EN (1<<16) //For restart mode need to set high
+#define I2C_CTL0_SW_RESET (1<<15)
+#define I2C_CTL0_SLAVE_ADDR(x) (x<<1) //bit[7:1]
+
+//control1
+#define I2C_CTL1_ALL_CLR (0x3FF)
+#define I2C_CTL1_EMPTY_CLR (1<<9)
+#define I2C_CTL1_SCL_HOLD_TOO_LONG_CLR (1<<8)
+#define I2C_CTL1_SCL_WAIT_CLR (1<<7)
+#define I2C_CTL1_EMPTY_THRESHOLD_CLR (1<<6)
+#define I2C_CTL1_DATA_NACK_CLR (1<<5)
+#define I2C_CTL1_ADDRESS_NACK_CLR (1<<4)
+#define I2C_CTL1_BUSY_CLR (1<<3)
+#define I2C_CTL1_CLKERR_CLR (1<<2)
+#define I2C_CTL1_DONE_CLR (1<<1)
+#define I2C_CTL1_SIFBUSY_CLR (1<<0)
+
+//control2
+#define I2C_CTL2_FREQ_CUSTOM(x) (x<<0) //bit[10:0]
+#define I2C_CTL2_SCL_DELAY(x) (x<<24) //bit[25:24]
+#define I2C_CTL2_SDA_HALF_ENABLE (1<<31)
+
+//control7
+#define I2C_CTL7_RDCOUNT(x) (x<<16) //bit[31:16]
+#define I2C_CTL7_WRCOUNT(x) (x<<0) //bit[15:0]
+
+
+#define I2C_CTL0_FREQ_MASK (0x7) // 3 bit
+#define I2C_CTL0_SLAVE_ADDR_MASK (0x7F) // 7 bit
+#define I2C_CTL2_FREQ_CUSTOM_MASK (0x7FF) // 11 bit
+#define I2C_CTL2_SCL_DELAY_MASK (0x3) // 2 bit
+#define I2C_CTL7_RW_COUNT_MASK (0xFFFF) // 16 bit
+#define I2C_EN0_CTL_EMPTY_THRESHOLD_MASK (0x7) // 3 bit
+#define I2C_SG_DMA_LLI_INDEX_MASK (0x1F) // 5 bit
+
+//interrupt enable1
+#define I2C_EN1_BURST_RDATA_INT (0x80008000) //must sync with GET_BYTES_EACHTIME
+
+//interrupt enable2
+#define I2C_EN2_BURST_RDATA_OVERFLOW_INT (0xFFFFFFFF)
+
+//i2c master mode
+#define I2C_MODE_DMA_MODE (1<<2)
+#define I2C_MODE_MANUAL_MODE (1<<1) //0:trigger mode 1:auto mode
+#define I2C_MODE_MANUAL_TRIG (1<<0)
+
+
+//dma config
+#define I2C_DMA_CFG_DMA_GO (1<<8)
+#define I2C_DMA_CFG_NON_BUF_MODE (1<<2)
+#define I2C_DMA_CFG_SAME_SLAVE (1<<1)
+#define I2C_DMA_CFG_DMA_MODE (1<<0)
+
+//dma interrupt flag
+#define I2C_DMA_INT_LENGTH0_FLAG (1<<6)
+#define I2C_DMA_INT_THRESHOLD_FLAG (1<<5)
+#define I2C_DMA_INT_IP_TIMEOUT_FLAG (1<<4)
+#define I2C_DMA_INT_GDMA_TIMEOUT_FLAG (1<<3)
+#define I2C_DMA_INT_WB_EN_ERROR_FLAG (1<<2)
+#define I2C_DMA_INT_WCNT_ERROR_FLAG (1<<1)
+#define I2C_DMA_INT_DMA_DONE_FLAG (1<<0)
+
+//dma interrupt enable
+#define I2C_DMA_EN_LENGTH0_INT (1<<6)
+#define I2C_DMA_EN_THRESHOLD_INT (1<<5)
+#define I2C_DMA_EN_IP_TIMEOUT_INT (1<<4)
+#define I2C_DMA_EN_GDMA_TIMEOUT_INT (1<<3)
+#define I2C_DMA_EN_WB_EN_ERROR_INT (1<<2)
+#define I2C_DMA_EN_WCNT_ERROR_INT (1<<1)
+#define I2C_DMA_EN_DMA_DONE_INT (1<<0)
+
+//interrupt
+#define I2C_INT_RINC_INDEX(x) (x<<18) //bit[20:18]
+#define I2C_INT_WINC_INDEX(x) (x<<15) //bit[17:15]
+#define I2C_INT_SCL_HOLD_TOO_LONG_FLAG (1<<11)
+#define I2C_INT_WFIFO_ENABLE (1<<10)
+#define I2C_INT_FULL_FLAG (1<<9)
+#define I2C_INT_EMPTY_FLAG (1<<8)
+#define I2C_INT_SCL_WAIT_FLAG (1<<7)
+#define I2C_INT_EMPTY_THRESHOLD_FLAG (1<<6)
+#define I2C_INT_DATA_NACK_FLAG (1<<5)
+#define I2C_INT_ADDRESS_NACK_FLAG (1<<4)
+#define I2C_INT_BUSY_FLAG (1<<3)
+#define I2C_INT_CLKERR_FLAG (1<<2)
+#define I2C_INT_DONE_FLAG (1<<1)
+#define I2C_INT_SIFBUSY_FLAG (1<<0)
+
+
+//interrupt enable0
+#define I2C_EN0_SCL_HOLD_TOO_LONG_INT (1<<13)
+#define I2C_EN0_NACK_INT (1<<12)
+#define I2C_EN0_CTL_EMPTY_THRESHOLD(x) (x<<9) //bit[11:9]
+#define I2C_EN0_EMPTY_INT (1<<8)
+#define I2C_EN0_SCL_WAIT_INT (1<<7)
+#define I2C_EN0_EMPTY_THRESHOLD_INT (1<<6)
+#define I2C_EN0_DATA_NACK_INT (1<<5)
+#define I2C_EN0_ADDRESS_NACK_INT (1<<4)
+#define I2C_EN0_BUSY_INT (1<<3)
+#define I2C_EN0_CLKERR_INT (1<<2)
+#define I2C_EN0_DONE_INT (1<<1)
+#define I2C_EN0_SIFBUSY_INT (1<<0)
+
+
+#define I2C_RESET(id, val) ((1 << (16 + id)) | (val << id))
+#define I2C_CLKEN(id, val) ((1 << (16 + id)) | (val << id))
+#define I2C_GCLKEN(id, val) ((1 << (16 + id)) | (val << id))
+
+
+struct regs_i2cm_s {
+ unsigned int control0; /* 00 */
+ unsigned int control1; /* 01 */
+ unsigned int control2; /* 02 */
+ unsigned int control3; /* 03 */
+ unsigned int control4; /* 04 */
+ unsigned int control5; /* 05 */
+ unsigned int i2cm_status0; /* 06 */
+ unsigned int interrupt; /* 07 */
+ unsigned int int_en0; /* 08 */
+ unsigned int i2cm_mode; /* 09 */
+ unsigned int i2cm_status1; /* 10 */
+ unsigned int i2cm_status2; /* 11 */
+ unsigned int control6; /* 12 */
+ unsigned int int_en1; /* 13 */
+ unsigned int i2cm_status3; /* 14 */
+ unsigned int i2cm_status4; /* 15 */
+ unsigned int int_en2; /* 16 */
+ unsigned int control7; /* 17 */
+ unsigned int control8; /* 18 */
+ unsigned int control9; /* 19 */
+ unsigned int reserved[3]; /* 20~22 */
+ unsigned int version; /* 23 */
+ unsigned int data00_03; /* 24 */
+ unsigned int data04_07; /* 25 */
+ unsigned int data08_11; /* 26 */
+ unsigned int data12_15; /* 27 */
+ unsigned int data16_19; /* 28 */
+ unsigned int data20_23; /* 29 */
+ unsigned int data24_27; /* 30 */
+ unsigned int data28_31; /* 31 */
+};
+
+struct regs_i2cm_dma_s {
+ unsigned int hw_version; /* 00 */
+ unsigned int dma_config; /* 01 */
+ unsigned int dma_length; /* 02 */
+ unsigned int dma_addr; /* 03 */
+ unsigned int port_mux; /* 04 */
+ unsigned int int_flag; /* 05 */
+ unsigned int int_en; /* 06 */
+ unsigned int sw_reset_state; /* 07 */
+ unsigned int reserved[2]; /* 08~09 */
+ unsigned int sg_dma_index; /* 10 */
+ unsigned int sg_dma_config; /* 11 */
+ unsigned int sg_dma_length; /* 12 */
+ unsigned int sg_dma_addr; /* 13 */
+ unsigned int reserved2; /* 14 */
+ unsigned int sg_setting; /* 15 */
+ unsigned int threshold; /* 16 */
+ unsigned int reserved3; /* 17 */
+ unsigned int gdma_read_timeout; /* 18 */
+ unsigned int gdma_write_timeout; /* 19 */
+ unsigned int ip_read_timeout; /* 20 */
+ unsigned int ip_write_timeout; /* 21 */
+ unsigned int write_cnt_debug; /* 22 */
+ unsigned int w_byte_en_debug; /* 23 */
+ unsigned int sw_reset_write_cnt_debug; /* 24 */
+ unsigned int reserved4[7]; /* 25~31 */
+};
+
+enum I2C_Status_e_ {
+ I2C_SUCCESS, /* successful */
+ I2C_ERR_I2C_BUSY, /* I2C is busy */
+ I2C_ERR_INVALID_DEVID, /* device id is invalid */
+ I2C_ERR_INVALID_CNT, /* read or write count is invalid */
+ I2C_ERR_TIMEOUT_OUT, /* wait timeout */
+ I2C_ERR_RECEIVE_NACK, /* receive NACK */
+ I2C_ERR_FIFO_EMPTY, /* FIFO empty */
+ I2C_ERR_SCL_HOLD_TOO_LONG, /* SCL hlod too long */
+ I2C_ERR_RDATA_OVERFLOW, /* rdata overflow */
+ I2C_ERR_INVALID_STATE, /* read write state is invalid */
+ I2C_ERR_REQUESET_IRQ, /* request irq failed */
+};
+
+enum I2C_State_e_ {
+ I2C_WRITE_STATE, /* i2c is write */
+ I2C_READ_STATE, /* i2c is read */
+ I2C_IDLE_STATE, /* i2c is idle */
+ I2C_DMA_WRITE_STATE,/* i2c is dma write */
+ I2C_DMA_READ_STATE, /* i2c is dma read */
+};
+
+enum I2C_switch_e_ {
+ I2C_POWER_ALL_SWITCH,
+ I2C_POWER_NO_SWITCH,
+};
+
+struct I2C_Cmd_t_ {
+ unsigned int dDevId;
+ unsigned int dFreq;
+ unsigned int dSlaveAddr;
+ unsigned int dRestartEn;
+ unsigned int dWrDataCnt;
+ unsigned int dRdDataCnt;
+ unsigned char *pWrData;
+ unsigned char *pRdData;
+};
+
+struct I2C_Irq_Dma_Flag_t_ {
+ unsigned char bDmaDone;
+ unsigned char bWCntError;
+ unsigned char bWBEnError;
+ unsigned char bGDmaTimeout;
+ unsigned char bIPTimeout;
+ unsigned char bThreshold;
+ unsigned char bLength0;
+};
+
+struct I2C_Irq_Flag_t_ {
+ unsigned char bActiveDone;
+ unsigned char bAddrNack;
+ unsigned char bDataNack;
+ unsigned char bEmptyThreshold;
+ unsigned char bFiFoEmpty;
+ unsigned char bFiFoFull;
+ unsigned char bSCLHoldTooLong;
+ unsigned char bRdOverflow;
+};
+
+struct I2C_Irq_Event_t_ {
+ enum I2C_State_e_ eRWState;
+ struct I2C_Irq_Flag_t_ stIrqFlag;
+ struct I2C_Irq_Dma_Flag_t_ stIrqDmaFlag;
+ unsigned int dDevId;
+ unsigned int dBurstCount;
+ unsigned int dBurstRemainder;
+ unsigned int dDataIndex;
+ unsigned int dDataTotalLen;
+ unsigned int dRegDataIndex;
+ unsigned char bI2CBusy;
+ unsigned char bRet;
+ unsigned char *pDataBuf;
+};
+
+
+enum I2C_DMA_RW_Mode_e_ {
+ I2C_DMA_WRITE_MODE,
+ I2C_DMA_READ_MODE,
+};
+
+enum I2C_RW_Mode_e_ {
+ I2C_WRITE_MODE,
+ I2C_READ_MODE,
+ I2C_RESTART_MODE,
+};
+
+enum I2C_Active_Mode_e_ {
+ I2C_TRIGGER,
+ I2C_AUTO,
+};
+
+
+struct i2c_compatible {
+ int mode; /* clk source switch*/
+};
+
+struct SpI2C_If_t_ {
+ struct i2c_msg *msgs; /* messages currently handled */
+ struct i2c_adapter adap;
+ struct device *dev;
+ struct I2C_Cmd_t_ stCmdInfo;
+ struct I2C_Irq_Event_t_ stIrqEvent;
+ void __iomem *i2c_regs;
+
+ struct clk *clk;
+ struct reset_control *rstc;
+ unsigned int i2c_clk_freq;
+ int irq;
+ wait_queue_head_t wait;
+
+ void __iomem *i2c_dma_regs;
+ dma_addr_t dma_phy_base;
+ void *dma_vir_base;
+ unsigned int mode;
+};
+
+
+
+#ifdef I2C_RETEST
+int test_count;
+#endif
+
+
+
+void sp_i2cm_status_clear(struct regs_i2cm_s *sr, unsigned int flag)
+{
+ unsigned int ctl1;
+
+ ctl1 = readl(&sr->control1);
+ ctl1 |= flag;
+ writel(ctl1, &sr->control1);
+
+ ctl1 = readl(&sr->control1);
+ ctl1 &= (~flag);
+ writel(ctl1, &sr->control1);
+}
+
+void sp_i2cm_dma_int_flag_clear(struct regs_i2cm_dma_s *sr_dma, unsigned int flag)
+{
+ unsigned int val;
+
+ val = readl(&sr_dma->int_flag);
+ val |= flag;
+ writel(val, &sr_dma->int_flag);
+}
+
+void sp_i2cm_reset(struct regs_i2cm_s *sr)
+{
+ unsigned int ctl0;
+
+ ctl0 = readl(&sr->control0);
+ ctl0 |= I2C_CTL0_SW_RESET;
+ writel(ctl0, &sr->control0);
+
+ udelay(2);
+}
+
+void sp_i2cm_data0_set(struct regs_i2cm_s *sr, unsigned int *wdata)
+{
+ writel(*wdata, &sr->data00_03);
+}
+
+
+void sp_i2cm_int_en0_disable(struct regs_i2cm_s *sr, unsigned int int0)
+{
+ unsigned int val;
+
+ val = readl(&sr->int_en0);
+ val &= (~int0);
+ writel(val, &sr->int_en0);
+
+}
+
+void sp_i2cm_rdata_flag_get(struct regs_i2cm_s *sr, unsigned int *flag)
+{
+ *flag = readl(&sr->i2cm_status3);
+}
+
+void sp_i2cm_data_get(struct regs_i2cm_s *sr, unsigned int index, unsigned int *rdata)
+{
+ switch (index) {
+ case 0:
+ *rdata = readl(&sr->data00_03);
+ break;
+
+ case 1:
+ *rdata = readl(&sr->data04_07);
+ break;
+
+ case 2:
+ *rdata = readl(&sr->data08_11);
+ break;
+
+ case 3:
+ *rdata = readl(&sr->data12_15);
+ break;
+
+ case 4:
+ *rdata = readl(&sr->data16_19);
+ break;
+
+ case 5:
+ *rdata = readl(&sr->data20_23);
+ break;
+
+ case 6:
+ *rdata = readl(&sr->data24_27);
+ break;
+
+ case 7:
+ *rdata = readl(&sr->data28_31);
+ break;
+
+ default:
+ break;
+ }
+}
+
+void sp_i2cm_rdata_flag_clear(struct regs_i2cm_s *sr, unsigned int flag)
+{
+ writel(flag, &sr->control6);
+ writel(0, &sr->control6);
+}
+
+void sp_i2cm_clock_freq_set(struct regs_i2cm_s *sr, unsigned int freq)
+{
+ unsigned int div;
+ unsigned int ctl0, ctl2;
+
+ div = I2C_CLK_SOURCE_FREQ / freq;
+ div -= 1;
+ if (I2C_CLK_SOURCE_FREQ % freq != 0)
+ div += 1;
+
+ if (div > I2C_CTL2_FREQ_CUSTOM_MASK)
+ div = I2C_CTL2_FREQ_CUSTOM_MASK;
+
+ ctl0 = readl(&sr->control0);
+ ctl0 &= (~I2C_CTL0_FREQ(I2C_CTL0_FREQ_MASK));
+ writel(ctl0, &sr->control0);
+
+ ctl2 = readl(&sr->control2);
+ ctl2 &= (~I2C_CTL2_FREQ_CUSTOM(I2C_CTL2_FREQ_CUSTOM_MASK));
+ ctl2 |= I2C_CTL2_FREQ_CUSTOM(div);
+ writel(ctl2, &sr->control2);
+
+}
+
+void sp_i2cm_slave_addr_set(struct regs_i2cm_s *sr, unsigned int addr)
+{
+ unsigned int t_addr = addr & I2C_CTL0_SLAVE_ADDR_MASK;
+ unsigned int ctl0;
+
+ ctl0 = readl(&sr->control0);
+ ctl0 &= (~I2C_CTL0_SLAVE_ADDR(I2C_CTL0_SLAVE_ADDR_MASK));
+ ctl0 |= I2C_CTL0_SLAVE_ADDR(t_addr);
+ writel(ctl0, &sr->control0);
+}
+
+void sp_i2cm_scl_delay_set(struct regs_i2cm_s *sr, unsigned int delay)
+{
+ unsigned int ctl2;
+
+ ctl2 = readl(&sr->control2);
+ ctl2 &= (~I2C_CTL2_SCL_DELAY(I2C_CTL2_SCL_DELAY_MASK));
+ ctl2 |= I2C_CTL2_SCL_DELAY(delay);
+ ctl2 &= (~(I2C_CTL2_SDA_HALF_ENABLE));
+ writel(ctl2, &sr->control2);
+}
+
+void sp_i2cm_trans_cnt_set(struct regs_i2cm_s *sr, unsigned int write_cnt,
+ unsigned int read_cnt)
+{
+ unsigned int t_write = write_cnt & I2C_CTL7_RW_COUNT_MASK;
+ unsigned int t_read = read_cnt & I2C_CTL7_RW_COUNT_MASK;
+ unsigned int ctl7;
+
+ ctl7 = I2C_CTL7_WRCOUNT(t_write) | I2C_CTL7_RDCOUNT(t_read);
+ writel(ctl7, &sr->control7);
+}
+
+void sp_i2cm_active_mode_set(struct regs_i2cm_s *sr, enum I2C_Active_Mode_e_ mode)
+{
+ unsigned int val;
+
+ val = readl(&sr->i2cm_mode);
+ val &= (~(I2C_MODE_MANUAL_MODE | I2C_MODE_MANUAL_TRIG));
+ switch (mode) {
+ default:
+ case I2C_TRIGGER:
+ break;
+
+ case I2C_AUTO:
+ val |= I2C_MODE_MANUAL_MODE;
+ break;
+ }
+ writel(val, &sr->i2cm_mode);
+}
+
+void sp_i2cm_data_set(struct regs_i2cm_s *sr, unsigned int *wdata)
+{
+ writel(wdata[0], &sr->data00_03);
+ writel(wdata[1], &sr->data04_07);
+ writel(wdata[2], &sr->data08_11);
+ writel(wdata[3], &sr->data12_15);
+ writel(wdata[4], &sr->data16_19);
+ writel(wdata[5], &sr->data20_23);
+ writel(wdata[6], &sr->data24_27);
+ writel(wdata[7], &sr->data28_31);
+}
+
+void sp_i2cm_rw_mode_set(struct regs_i2cm_s *sr, enum I2C_RW_Mode_e_ rw_mode)
+{
+ unsigned int ctl0;
+
+ ctl0 = readl(&sr->control0);
+ switch (rw_mode) {
+ default:
+ case I2C_WRITE_MODE:
+ ctl0 &= (~(I2C_CTL0_PREFETCH | I2C_CTL0_RESTART_EN | I2C_CTL0_SUBADDR_EN));
+ break;
+
+ case I2C_READ_MODE:
+ ctl0 &= (~(I2C_CTL0_RESTART_EN | I2C_CTL0_SUBADDR_EN));
+ ctl0 |= I2C_CTL0_PREFETCH;
+ break;
+
+ case I2C_RESTART_MODE:
+ ctl0 |= (I2C_CTL0_PREFETCH | I2C_CTL0_RESTART_EN | I2C_CTL0_SUBADDR_EN);
+ break;
+ }
+ writel(ctl0, &sr->control0);
+}
+
+
+void sp_i2cm_int_en0_set(struct regs_i2cm_s *sr, unsigned int int0)
+{
+ writel(int0, &sr->int_en0);
+}
+
+void sp_i2cm_int_en1_set(struct regs_i2cm_s *sr, unsigned int rdata_en)
+{
+ writel(rdata_en, &sr->int_en1);
+}
+
+void sp_i2cm_int_en2_set(struct regs_i2cm_s *sr, unsigned int overflow_en)
+{
+ writel(overflow_en, &sr->int_en2);
+}
+
+
+#define MOON0_BASE 0xF8000000
+
+struct Moon_RegBase_s {
+ void __iomem *moon0_regs;
+} Moon_RegBase;
+
+struct Moon_RegBase_s stMoonRegBase;
+
+struct regs_moon0_s {
+ unsigned int stamp; /* 00 */
+ unsigned int clken[10]; /* 01~10 */
+ unsigned int gclken[10]; /* 11~20 */
+ unsigned int reset[10]; /* 21~30 */
+ unsigned int sfg_cfg_mode; /* 31 */
+} regs_moon0;
+
+
+void sp_i2cm_enable(unsigned int device_id, void __iomem *membase)
+{
+ struct regs_moon0_s *pMoon0Reg = (struct regs_moon0_s *)membase;
+
+ writel(I2C_RESET(device_id, 0), &(pMoon0Reg->reset[3]));
+ writel(I2C_CLKEN(device_id, 1), &(pMoon0Reg->clken[3]));
+ writel(I2C_GCLKEN(device_id, 0), &(pMoon0Reg->gclken[3]));
+}
+
+void sp_i2cm_manual_trigger(struct regs_i2cm_s *sr)
+{
+ unsigned int val;
+
+ val = readl(&sr->i2cm_mode);
+ val |= I2C_MODE_MANUAL_TRIG;
+ writel(val, &sr->i2cm_mode);
+}
+
+void sp_i2cm_int_en0_with_thershold_set(struct regs_i2cm_s *sr,
+ unsigned int int0, unsigned char threshold)
+{
+ unsigned int val;
+
+ val = (int0 | I2C_EN0_CTL_EMPTY_THRESHOLD(threshold));
+ writel(val, &sr->int_en0);
+}
+
+void sp_i2cm_dma_mode_enable(struct regs_i2cm_s *sr)
+{
+ unsigned int val;
+
+ val = readl(&sr->i2cm_mode);
+ val |= I2C_MODE_DMA_MODE;
+ writel(val, &sr->i2cm_mode);
+}
+
+void sp_i2cm_dma_addr_set(struct regs_i2cm_dma_s *sr_dma, unsigned int addr)
+{
+ writel(addr, &sr_dma->dma_addr);
+}
+
+void sp_i2cm_dma_length_set(struct regs_i2cm_dma_s *sr_dma, unsigned int length)
+{
+ length &= (0xFFFF); //only support 16 bit
+ writel(length, &sr_dma->dma_length);
+}
+
+void sp_i2cm_dma_rw_mode_set(struct regs_i2cm_dma_s *sr_dma,
+ enum I2C_DMA_RW_Mode_e_ rw_mode)
+{
+ unsigned int val;
+
+ val = readl(&sr_dma->dma_config);
+ switch (rw_mode) {
+ default:
+ case I2C_DMA_WRITE_MODE:
+ val |= I2C_DMA_CFG_DMA_MODE;
+ break;
+
+ case I2C_DMA_READ_MODE:
+ val &= (~I2C_DMA_CFG_DMA_MODE);
+ break;
+ }
+ writel(val, &sr_dma->dma_config);
+
+}
+
+void sp_i2cm_dma_int_en_set(struct regs_i2cm_dma_s *sr_dma, unsigned int dma_int)
+{
+ writel(dma_int, &sr_dma->int_en);
+}
+
+void sp_i2cm_dma_go_set(struct regs_i2cm_dma_s *sr_dma)
+{
+ unsigned int val;
+
+ val = readl(&sr_dma->dma_config);
+ val |= I2C_DMA_CFG_DMA_GO;
+ writel(val, &sr_dma->dma_config);
+}
+
+
+static void _sp_i2cm_intflag_check(struct SpI2C_If_t_ *pstSpI2CInfo,
+ struct I2C_Irq_Event_t_ *pstIrqEvent)
+{
+
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+ unsigned int int_flag = 0;
+ unsigned int overflow_flag = 0;
+ #ifdef I2C_RETEST
+ unsigned int scl_belay = 0;
+ #endif
+
+
+ int_flag = readl(&sr->interrupt);
+
+ if (int_flag & I2C_INT_DONE_FLAG) {
+ DBG_INFO("I2C is done !!\n");
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bActiveDone = 0;
+ }
+
+ if (int_flag & I2C_INT_ADDRESS_NACK_FLAG) {
+ DBG_INFO("I2C slave address NACK !!\n");
+ #ifdef I2C_RETEST
+
+ scl_belay = readl(&sr->control2);
+ scl_belay &= I2C_CTL2_SCL_DELAY(I2C_CTL2_SCL_DELAY_MASK);
+
+ if (scl_belay == 0x00)
+ test_count++;
+ else if (test_count > 9)
+ test_count = 1;
+ #endif
+ pstIrqEvent->stIrqFlag.bAddrNack = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bAddrNack = 0;
+ }
+
+ if (int_flag & I2C_INT_DATA_NACK_FLAG) {
+ DBG_INFO("I2C slave data NACK !!\n");
+ pstIrqEvent->stIrqFlag.bDataNack = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bDataNack = 0;
+ }
+
+ // write use
+ if (int_flag & I2C_INT_EMPTY_THRESHOLD_FLAG) {
+ DBG_INFO("I2C empty threshold occur !!\n");
+ pstIrqEvent->stIrqFlag.bEmptyThreshold = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bEmptyThreshold = 0;
+ }
+
+ // write use
+ if (int_flag & I2C_INT_EMPTY_FLAG) {
+ DBG_INFO("I2C FIFO empty occur !!\n");
+ pstIrqEvent->stIrqFlag.bFiFoEmpty = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bFiFoEmpty = 0;
+ }
+
+ // write use (for debug)
+ if (int_flag & I2C_INT_FULL_FLAG) {
+ DBG_INFO("I2C FIFO full occur !!\n");
+ pstIrqEvent->stIrqFlag.bFiFoFull = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bFiFoFull = 0;
+ }
+
+ if (int_flag & I2C_INT_SCL_HOLD_TOO_LONG_FLAG) {
+ DBG_INFO("I2C SCL hold too long occur !!\n");
+ pstIrqEvent->stIrqFlag.bSCLHoldTooLong = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bSCLHoldTooLong = 0;
+ }
+ sp_i2cm_status_clear(sr, I2C_CTL1_ALL_CLR);
+
+ // read use
+ overflow_flag = readl(&sr->i2cm_status4);
+
+ if (overflow_flag) {
+ DBG_ERR("I2C burst read data overflow !! overflow_flag = 0x%x\n", overflow_flag);
+ pstIrqEvent->stIrqFlag.bRdOverflow = 1;
+ } else {
+ pstIrqEvent->stIrqFlag.bRdOverflow = 0;
+ }
+}
+
+static void _sp_i2cm_dma_intflag_check(struct SpI2C_If_t_ *pstSpI2CInfo,
+ struct I2C_Irq_Event_t_ *pstIrqEvent)
+{
+ struct regs_i2cm_dma_s *sr_dma = (struct regs_i2cm_dma_s *)pstSpI2CInfo->i2c_dma_regs;
+ unsigned int int_flag = 0;
+
+ int_flag = readl(&sr_dma->int_flag);
+
+ if (int_flag & I2C_DMA_INT_DMA_DONE_FLAG) {
+ DBG_INFO("I2C DMA is done !!\n");
+ pstIrqEvent->stIrqDmaFlag.bDmaDone = 1;
+ } else {
+ pstIrqEvent->stIrqDmaFlag.bDmaDone = 0;
+ }
+
+ if (int_flag & I2C_DMA_INT_WCNT_ERROR_FLAG) {
+ DBG_INFO("I2C DMA WCNT ERR !!\n");
+ pstIrqEvent->stIrqDmaFlag.bWCntError = 1;
+ } else {
+ pstIrqEvent->stIrqDmaFlag.bWCntError = 0;
+ }
+ if (int_flag & I2C_DMA_INT_WB_EN_ERROR_FLAG) {
+ DBG_INFO("I2C DMA WB EN ERR !!\n");
+ pstIrqEvent->stIrqDmaFlag.bWBEnError = 1;
+ } else {
+ pstIrqEvent->stIrqDmaFlag.bWBEnError = 0;
+ }
+ if (int_flag & I2C_DMA_INT_GDMA_TIMEOUT_FLAG) {
+ DBG_INFO("I2C DMA timeout !!\n");
+ pstIrqEvent->stIrqDmaFlag.bGDmaTimeout = 1;
+ } else {
+ pstIrqEvent->stIrqDmaFlag.bGDmaTimeout = 0;
+ }
+ if (int_flag & I2C_DMA_INT_IP_TIMEOUT_FLAG) {
+ DBG_INFO("I2C IP timeout !!\n");
+ pstIrqEvent->stIrqDmaFlag.bIPTimeout = 1;
+ } else {
+ pstIrqEvent->stIrqDmaFlag.bIPTimeout = 0;
+ }
+ if (int_flag & I2C_DMA_INT_LENGTH0_FLAG) {
+ DBG_INFO("I2C Length is zero !!\n");
+ pstIrqEvent->stIrqDmaFlag.bLength0 = 1;
+ } else {
+ pstIrqEvent->stIrqDmaFlag.bLength0 = 0;
+ }
+
+ sp_i2cm_dma_int_flag_clear(sr_dma, 0x7F); //write 1 to clear
+
+}
+
+static irqreturn_t _sp_i2cm_irqevent_handler(int irq, void *args)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = args;
+ struct I2C_Irq_Event_t_ *pstIrqEvent = &(pstSpI2CInfo->stIrqEvent);
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+ unsigned char w_data[32] = {0};
+ unsigned char r_data[I2C_BURST_RDATA_BYTES] = {0};
+ unsigned int rdata_flag = 0;
+ unsigned int bit_index = 0;
+ int i = 0, j = 0, k = 0;
+
+ _sp_i2cm_intflag_check(pstSpI2CInfo, pstIrqEvent);
+
+switch (pstIrqEvent->eRWState) {
+case I2C_WRITE_STATE:
+case I2C_DMA_WRITE_STATE:
+ if (pstIrqEvent->stIrqFlag.bActiveDone) {
+ DBG_INFO("I2C write success !!\n");
+ pstIrqEvent->bRet = I2C_SUCCESS;
+ wake_up(&pstSpI2CInfo->wait);
+ } else if (pstIrqEvent->stIrqFlag.bAddrNack || pstIrqEvent->stIrqFlag.bDataNack) {
+
+ if (pstIrqEvent->eRWState == I2C_DMA_WRITE_STATE)
+ DBG_ERR("DMA wtire NACK!!\n");
+ else
+ DBG_ERR("wtire NACK!!\n");
+
+ pstIrqEvent->bRet = I2C_ERR_RECEIVE_NACK;
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ wake_up(&pstSpI2CInfo->wait);
+ sp_i2cm_reset(sr);
+ } else if (pstIrqEvent->stIrqFlag.bSCLHoldTooLong) {
+ DBG_ERR("I2C SCL hold too long !!\n");
+ pstIrqEvent->bRet = I2C_ERR_SCL_HOLD_TOO_LONG;
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ wake_up(&pstSpI2CInfo->wait);
+ sp_i2cm_reset(sr);
+ } else if (pstIrqEvent->stIrqFlag.bFiFoEmpty) {
+ DBG_ERR("I2C FIFO empty !!\n");
+ pstIrqEvent->bRet = I2C_ERR_FIFO_EMPTY;
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ wake_up(&pstSpI2CInfo->wait);
+ sp_i2cm_reset(sr);
+ } else if ((pstIrqEvent->dBurstCount > 0) &&
+ (pstIrqEvent->eRWState == I2C_WRITE_STATE)) {
+ if (pstIrqEvent->stIrqFlag.bEmptyThreshold) {
+ for (i = 0; i < I2C_EMPTY_THRESHOLD_VALUE; i++) {
+ for (j = 0; j < 4; j++) {
+
+ if (pstIrqEvent->dDataIndex >= pstIrqEvent->dDataTotalLen)
+ w_data[j] = 0;
+ else
+ w_data[j] =
+ pstIrqEvent->pDataBuf[pstIrqEvent->dDataIndex];
+
+ pstIrqEvent->dDataIndex++;
+ }
+ sp_i2cm_data0_set(sr, (unsigned int *)w_data);
+ pstIrqEvent->dBurstCount--;
+ if (pstIrqEvent->dBurstCount == 0) {
+ sp_i2cm_int_en0_disable(sr,
+ (I2C_EN0_EMPTY_THRESHOLD_INT | I2C_EN0_EMPTY_INT));
+ break;
+ }
+ }
+ sp_i2cm_status_clear(sr, I2C_CTL1_EMPTY_THRESHOLD_CLR);
+ }
+ }
+ break;
+
+case I2C_READ_STATE:
+case I2C_DMA_READ_STATE:
+ if (pstIrqEvent->stIrqFlag.bAddrNack || pstIrqEvent->stIrqFlag.bDataNack) {
+
+ if (pstIrqEvent->eRWState == I2C_DMA_READ_STATE)
+ DBG_ERR("DMA read NACK!!\n");
+ else
+ DBG_ERR("read NACK!!\n");
+
+ pstIrqEvent->bRet = I2C_ERR_RECEIVE_NACK;
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ wake_up(&pstSpI2CInfo->wait);
+ sp_i2cm_reset(sr);
+ } else if (pstIrqEvent->stIrqFlag.bSCLHoldTooLong) {
+ DBG_ERR("I2C SCL hold too long !!\n");
+ pstIrqEvent->bRet = I2C_ERR_SCL_HOLD_TOO_LONG;
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ wake_up(&pstSpI2CInfo->wait);
+ sp_i2cm_reset(sr);
+ } else if (pstIrqEvent->stIrqFlag.bRdOverflow) {
+ DBG_ERR("I2C read data overflow !!\n");
+ pstIrqEvent->bRet = I2C_ERR_RDATA_OVERFLOW;
+ pstIrqEvent->stIrqFlag.bActiveDone = 1;
+ wake_up(&pstSpI2CInfo->wait);
+ sp_i2cm_reset(sr);
+} else {
+ if ((pstIrqEvent->dBurstCount > 0) && (pstIrqEvent->eRWState == I2C_READ_STATE)) {
+ sp_i2cm_rdata_flag_get(sr, &rdata_flag);
+ for (i = 0; i < (32 / I2C_BURST_RDATA_BYTES); i++) {
+ bit_index = (I2C_BURST_RDATA_BYTES - 1) + (I2C_BURST_RDATA_BYTES * i);
+ if (rdata_flag & (1 << bit_index)) {
+ for (j = 0; j < (I2C_BURST_RDATA_BYTES/4); j++) {
+ k = pstIrqEvent->dRegDataIndex + j;
+ if (k >= 8)
+ k -= 8;
+
+ sp_i2cm_data_get(sr,
+ k, (unsigned int *)(&pstIrqEvent->pDataBuf[pstIrqEvent->dDataIndex]));
+ pstIrqEvent->dDataIndex += 4;
+ }
+ sp_i2cm_rdata_flag_clear(sr,
+ (((1 << I2C_BURST_RDATA_BYTES) - 1) << (I2C_BURST_RDATA_BYTES * i)));
+ pstIrqEvent->dRegDataIndex += (I2C_BURST_RDATA_BYTES / 4);
+ if (pstIrqEvent->dRegDataIndex >= 8)
+ pstIrqEvent->dBurstCount--;
+ }
+ }
+ }
+ if (pstIrqEvent->stIrqFlag.bActiveDone) {
+ if ((pstIrqEvent->dBurstRemainder) &&
+ (pstIrqEvent->eRWState == I2C_READ_STATE)) {
+ j = 0;
+ for (i = 0; i < (I2C_BURST_RDATA_BYTES/4); i++) {
+ k = pstIrqEvent->dRegDataIndex + i;
+ if (k >= 8)
+ k -= 8;
+
+ sp_i2cm_data_get(sr, k, (unsigned int *)(&r_data[j]));
+ j += 4;
+ }
+
+ for (i = 0; i < pstIrqEvent->dBurstRemainder; i++)
+ pstIrqEvent->pDataBuf[pstIrqEvent->dDataIndex + i]
+ = r_data[i];
+ }
+
+ DBG_INFO("I2C read success !!\n");
+ pstIrqEvent->bRet = I2C_SUCCESS;
+ wake_up(&pstSpI2CInfo->wait);
+ }
+ }
+ break;
+
+default:
+ break;
+}
+ //switch case
+
+ _sp_i2cm_dma_intflag_check(pstSpI2CInfo, pstIrqEvent);
+
+ switch (pstIrqEvent->eRWState) {
+ case I2C_DMA_WRITE_STATE:
+ DBG_INFO("I2C_DMA_WRITE_STATE !!\n");
+ if (pstIrqEvent->stIrqDmaFlag.bDmaDone) {
+ DBG_INFO("I2C dma write success !!\n");
+ pstIrqEvent->bRet = I2C_SUCCESS;
+ wake_up(&pstSpI2CInfo->wait);
+ }
+ break;
+
+ case I2C_DMA_READ_STATE:
+ DBG_INFO("I2C_DMA_READ_STATE !!\n");
+ if (pstIrqEvent->stIrqDmaFlag.bDmaDone) {
+ DBG_INFO("I2C dma read success !!\n");
+ pstIrqEvent->bRet = I2C_SUCCESS;
+ wake_up(&pstSpI2CInfo->wait);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+static int _sp_i2cm_init(unsigned int device_id, struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+
+ FUNC_DEBUG();
+
+ if (device_id >= I2C_MASTER_NUM) {
+ DBG_ERR("I2C device id is not correct !! device_id=%d\n", device_id);
+ return I2C_ERR_INVALID_DEVID;
+ }
+
+ DBG_INFO("[I2C adapter] i2c_regs= 0x%x\n", (unsigned int)pstSpI2CInfo->i2c_regs);
+ DBG_INFO("[I2C adapter] i2c_dma_regs= 0x%x\n", (unsigned int)pstSpI2CInfo->i2c_dma_regs);
+
+ sp_i2cm_reset(sr);
+
+ return I2C_SUCCESS;
+}
+
+static int _sp_i2cm_get_irq(struct platform_device *pdev, struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ int irq;
+
+ FUNC_DEBUG();
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ DBG_ERR("[I2C adapter] get irq number fail, irq = %d\n", irq);
+ return -ENODEV;
+ }
+
+ pstSpI2CInfo->irq = irq;
+ return I2C_SUCCESS;
+}
+
+static int _sp_i2cm_get_resources(struct platform_device *pdev,
+ struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ int ret;
+ struct resource *res;
+
+ FUNC_DEBUG();
+
+ /* find and map our resources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, I2CM_REG_NAME);
+ if (res) {
+ pstSpI2CInfo->i2c_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pstSpI2CInfo->i2c_regs))
+ DBG_INFO("[I2C adapter] platform_get_resource_byname fail\n");
+ } else {
+ DBG_ERR("[I2C adapter] %s (%d)\n", __func__, __LINE__);
+ return -ENODEV;
+ }
+
+
+ /* find DMA and map our resources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, I2CM_DMA_REG_NAME);
+ if (res) {
+ pstSpI2CInfo->i2c_dma_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pstSpI2CInfo->i2c_dma_regs))
+ DBG_INFO("[I2C adapter] platform_get_resource_byname fail\n");
+ } else {
+ DBG_ERR("[I2C adapter] %s (%d)\n", __func__, __LINE__);
+ return -ENODEV;
+ }
+
+ ret = _sp_i2cm_get_irq(pdev, pstSpI2CInfo);
+ if (ret) {
+ DBG_ERR("[I2C adapter] %s (%d) ret = %d\n", __func__, __LINE__, ret);
+ return ret;
+ }
+
+ return I2C_SUCCESS;
+}
+
+int sp_i2cm_read(struct I2C_Cmd_t_ *pstCmdInfo, struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+ struct I2C_Irq_Event_t_ *pstIrqEvent = &(pstSpI2CInfo->stIrqEvent);
+ unsigned char w_data[32] = {0};
+ unsigned int read_cnt = 0;
+ unsigned int write_cnt = 0;
+ unsigned int burst_cnt = 0, burst_r = 0;
+ unsigned int int0 = 0, int1 = 0, int2 = 0;
+ int ret = I2C_SUCCESS;
+ int i = 0;
+
+ FUNC_DEBUG();
+
+ if (pstCmdInfo->dDevId > I2C_MASTER_NUM)
+ return I2C_ERR_INVALID_DEVID;
+
+ if (pstIrqEvent->bI2CBusy) {
+ DBG_ERR("I2C is busy !!\n");
+ return I2C_ERR_I2C_BUSY;
+ }
+
+ memset(pstIrqEvent, 0, sizeof(*pstIrqEvent));
+ pstIrqEvent->bI2CBusy = 1;
+
+ write_cnt = pstCmdInfo->dWrDataCnt;
+ read_cnt = pstCmdInfo->dRdDataCnt;
+
+ if (pstCmdInfo->dRestartEn) {
+ //if ((write_cnt > 32) || (write_cnt == 0)) {
+ if (write_cnt > 32) {
+ pstIrqEvent->bI2CBusy = 0;
+ DBG_ERR("I2C write count is invalid !! write count=%d\n", write_cnt);
+ return I2C_ERR_INVALID_CNT;
+ }
+ }
+
+ if ((read_cnt > 0xFFFF) || (read_cnt == 0)) {
+ pstIrqEvent->bI2CBusy = 0;
+ DBG_ERR("I2C read count is invalid !! read count=%d\n", read_cnt);
+ return I2C_ERR_INVALID_CNT;
+ }
+
+ burst_cnt = read_cnt / I2C_BURST_RDATA_BYTES;
+ burst_r = read_cnt % I2C_BURST_RDATA_BYTES;
+ DBG_INFO("write_cnt = %d, read_cnt = %d, burst_cnt = %d, burst_r = %d\n",
+ write_cnt, read_cnt, burst_cnt, burst_r);
+
+ int0 = (I2C_EN0_SCL_HOLD_TOO_LONG_INT | I2C_EN0_EMPTY_INT | I2C_EN0_DATA_NACK_INT
+ | I2C_EN0_ADDRESS_NACK_INT | I2C_EN0_DONE_INT);
+ if (burst_cnt) {
+ int1 = I2C_BURST_RDATA_FLAG;
+ int2 = I2C_BURST_RDATA_ALL_FLAG;
+ }
+
+ pstIrqEvent->eRWState = I2C_READ_STATE;
+ pstIrqEvent->dBurstCount = burst_cnt;
+ pstIrqEvent->dBurstRemainder = burst_r;
+ pstIrqEvent->dDataIndex = 0;
+ pstIrqEvent->dRegDataIndex = 0;
+ pstIrqEvent->dDataTotalLen = read_cnt;
+ pstIrqEvent->pDataBuf = pstCmdInfo->pRdData;
+
+ //hal_i2cm_reset(pstCmdInfo->dDevId);
+ sp_i2cm_reset(sr);
+ sp_i2cm_clock_freq_set(sr, pstCmdInfo->dFreq);
+ sp_i2cm_slave_addr_set(sr, pstCmdInfo->dSlaveAddr);
+ #ifdef I2C_RETEST
+ if ((test_count > 1) && (test_count%3 == 0)) {
+ sp_i2cm_scl_delay_set(sr, 0x01);
+ DBG_INFO("test_count = %d", test_count);
+ } else {
+ sp_i2cm_scl_delay_set(sr, I2C_SCL_DELAY);
+ }
+ #endif
+ sp_i2cm_trans_cnt_set(sr, write_cnt, read_cnt);
+ sp_i2cm_active_mode_set(sr, I2C_TRIGGER);
+
+ if (pstCmdInfo->dRestartEn) {
+ DBG_INFO("I2C_RESTART_MODE\n");
+ for (i = 0; i < write_cnt; i++)
+ w_data[i] = pstCmdInfo->pWrData[i];
+
+ sp_i2cm_data_set(sr, (unsigned int *)w_data);
+ sp_i2cm_rw_mode_set(sr, I2C_RESTART_MODE);
+ } else {
+ DBG_INFO("I2C_READ_MODE\n");
+ sp_i2cm_rw_mode_set(sr, I2C_READ_MODE);
+ }
+
+ sp_i2cm_int_en0_set(sr, int0);
+ sp_i2cm_int_en1_set(sr, int1);
+ sp_i2cm_int_en2_set(sr, int2);
+ sp_i2cm_manual_trigger(sr); //start send data
+
+ ret = wait_event_timeout(pstSpI2CInfo->wait,
+ pstIrqEvent->stIrqFlag.bActiveDone, (I2C_SLEEP_TIMEOUT * HZ) / 500);
+ if (ret == 0) {
+ DBG_ERR("I2C read timeout !!\n");
+ ret = I2C_ERR_TIMEOUT_OUT;
+ } else {
+ ret = pstIrqEvent->bRet;
+ }
+ sp_i2cm_reset(sr);
+ pstIrqEvent->eRWState = I2C_IDLE_STATE;
+ pstIrqEvent->bI2CBusy = 0;
+
+ return ret;
+}
+
+int sp_i2cm_write(struct I2C_Cmd_t_ *pstCmdInfo, struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+ struct I2C_Irq_Event_t_ *pstIrqEvent = &(pstSpI2CInfo->stIrqEvent);
+ unsigned char w_data[32] = {0};
+ unsigned int write_cnt = 0;
+ unsigned int burst_cnt = 0;
+ unsigned int int0 = 0;
+ int ret = I2C_SUCCESS;
+ int i = 0;
+
+ FUNC_DEBUG();
+
+ if (pstCmdInfo->dDevId > I2C_MASTER_NUM)
+ return I2C_ERR_INVALID_DEVID;
+
+ if (pstIrqEvent->bI2CBusy) {
+ DBG_ERR("I2C is busy !!\n");
+ return I2C_ERR_I2C_BUSY;
+ }
+
+ memset(pstIrqEvent, 0, sizeof(*pstIrqEvent));
+ pstIrqEvent->bI2CBusy = 1;
+
+ write_cnt = pstCmdInfo->dWrDataCnt;
+
+ if (write_cnt > 0xFFFF) {
+ pstIrqEvent->bI2CBusy = 0;
+ DBG_ERR("I2C write count is invalid !! write count=%d\n", write_cnt);
+ return I2C_ERR_INVALID_CNT;
+ }
+
+ if (write_cnt > 32) {
+ burst_cnt = (write_cnt - 32) / 4;
+ if ((write_cnt - 32) % 4)
+ burst_cnt += 1;
+ for (i = 0; i < 32; i++)
+ w_data[i] = pstCmdInfo->pWrData[i];
+ } else {
+ for (i = 0; i < write_cnt; i++)
+ w_data[i] = pstCmdInfo->pWrData[i];
+ }
+ DBG_INFO("write_cnt = %d, burst_cnt = %d\n", write_cnt, burst_cnt);
+
+ int0 = (I2C_EN0_SCL_HOLD_TOO_LONG_INT | I2C_EN0_EMPTY_INT | I2C_EN0_DATA_NACK_INT
+ | I2C_EN0_ADDRESS_NACK_INT | I2C_EN0_DONE_INT);
+
+ if (burst_cnt)
+ int0 |= I2C_EN0_EMPTY_THRESHOLD_INT;
+
+ pstIrqEvent->eRWState = I2C_WRITE_STATE;
+ pstIrqEvent->dBurstCount = burst_cnt;
+ pstIrqEvent->dDataIndex = i;
+ pstIrqEvent->dDataTotalLen = write_cnt;
+ pstIrqEvent->pDataBuf = pstCmdInfo->pWrData;
+
+ sp_i2cm_reset(sr);
+ sp_i2cm_clock_freq_set(sr, pstCmdInfo->dFreq);
+ sp_i2cm_slave_addr_set(sr, pstCmdInfo->dSlaveAddr);
+ #ifdef I2C_RETEST
+ if ((test_count > 1) && (test_count%3 == 0)) {
+ DBG_INFO("test_count = %d", test_count);
+ sp_i2cm_scl_delay_set(sr, 0x01);
+ } else {
+ sp_i2cm_scl_delay_set(sr, I2C_SCL_DELAY);
+ }
+ #endif
+ sp_i2cm_trans_cnt_set(sr, write_cnt, 0);
+ sp_i2cm_active_mode_set(sr, I2C_TRIGGER);
+ sp_i2cm_rw_mode_set(sr, I2C_WRITE_MODE);
+ sp_i2cm_data_set(sr, (unsigned int *)w_data);
+
+ if (burst_cnt)
+ sp_i2cm_int_en0_with_thershold_set(sr, int0, I2C_EMPTY_THRESHOLD_VALUE);
+ else
+ sp_i2cm_int_en0_set(sr, int0);
+
+ sp_i2cm_manual_trigger(sr); //start send data
+
+ ret = wait_event_timeout(pstSpI2CInfo->wait,
+ pstIrqEvent->stIrqFlag.bActiveDone, (I2C_SLEEP_TIMEOUT * HZ) / 500);
+ if (ret == 0) {
+ DBG_ERR("I2C write timeout !!\n");
+ ret = I2C_ERR_TIMEOUT_OUT;
+ } else {
+ ret = pstIrqEvent->bRet;
+ }
+ sp_i2cm_reset(sr);
+ pstIrqEvent->eRWState = I2C_IDLE_STATE;
+ pstIrqEvent->bI2CBusy = 0;
+
+ return ret;
+}
+
+
+int sp_i2cm_dma_write(struct I2C_Cmd_t_ *pstCmdInfo, struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+ struct regs_i2cm_dma_s *sr_dma = (struct regs_i2cm_dma_s *)pstSpI2CInfo->i2c_dma_regs;
+ struct I2C_Irq_Event_t_ *pstIrqEvent = &(pstSpI2CInfo->stIrqEvent);
+ struct Moon_RegBase_s *pstMoonRegBase = &stMoonRegBase;
+ unsigned int int0 = 0;
+ int ret = I2C_SUCCESS;
+ unsigned int dma_int = 0;
+ dma_addr_t dma_w_addr = 0;
+
+ FUNC_DEBUG();
+
+
+ if (pstCmdInfo->dDevId > I2C_MASTER_NUM)
+ return I2C_ERR_INVALID_DEVID;
+
+ if (pstSpI2CInfo->mode == I2C_POWER_ALL_SWITCH) {
+ pstMoonRegBase->moon0_regs = (void __iomem *)MOON0_BASE;
+ sp_i2cm_enable(0, pstMoonRegBase->moon0_regs);
+ }
+
+ if (pstIrqEvent->bI2CBusy) {
+ DBG_ERR("I2C is busy !!\n");
+ return I2C_ERR_I2C_BUSY;
+ }
+
+ memset(pstIrqEvent, 0, sizeof(*pstIrqEvent));
+ pstIrqEvent->bI2CBusy = 1;
+
+ if (pstCmdInfo->dWrDataCnt > 0xFFFF) {
+ pstIrqEvent->bI2CBusy = 0;
+ DBG_ERR("I2C write count is invalid !! write count=%d\n", pstCmdInfo->dWrDataCnt);
+ return I2C_ERR_INVALID_CNT;
+ }
+
+
+ DBG_INFO(" DMA DataCnt = %d\n", pstCmdInfo->dWrDataCnt);
+
+ pstIrqEvent->eRWState = I2C_DMA_WRITE_STATE;
+
+ dma_w_addr = dma_map_single(pstSpI2CInfo->dev, pstCmdInfo->pWrData,
+ pstCmdInfo->dWrDataCnt, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(pstSpI2CInfo->dev, dma_w_addr)) {
+ DBG_ERR("I2C dma_w_addr fail\n");
+ dma_w_addr = pstSpI2CInfo->dma_phy_base;
+ memcpy(pstSpI2CInfo->dma_vir_base, pstCmdInfo->pWrData, pstCmdInfo->dWrDataCnt);
+ }
+
+ int0 = (I2C_EN0_SCL_HOLD_TOO_LONG_INT | I2C_EN0_EMPTY_INT
+ | I2C_EN0_DATA_NACK_INT | I2C_EN0_ADDRESS_NACK_INT | I2C_EN0_DONE_INT);
+
+
+ dma_int = I2C_DMA_EN_DMA_DONE_INT;
+
+
+ sp_i2cm_reset(sr);
+ sp_i2cm_dma_mode_enable(sr);
+ sp_i2cm_clock_freq_set(sr, pstCmdInfo->dFreq);
+ sp_i2cm_slave_addr_set(sr, pstCmdInfo->dSlaveAddr);
+
+ #ifdef I2C_RETEST
+ if ((test_count > 1) && (test_count%3 == 0)) {
+ DBG_INFO("test_count = %d", test_count);
+ sp_i2cm_scl_delay_set(sr, 0x01);
+ } else {
+ sp_i2cm_scl_delay_set(sr, I2C_SCL_DELAY);
+ }
+ #endif
+ sp_i2cm_active_mode_set(sr, I2C_AUTO);
+ sp_i2cm_rw_mode_set(sr, I2C_WRITE_MODE);
+ sp_i2cm_int_en0_set(sr, int0);
+
+ sp_i2cm_dma_addr_set(sr_dma, (unsigned int)dma_w_addr);
+ sp_i2cm_dma_length_set(sr_dma, pstCmdInfo->dWrDataCnt);
+ sp_i2cm_dma_rw_mode_set(sr_dma, I2C_DMA_READ_MODE);
+ sp_i2cm_dma_int_en_set(sr_dma, dma_int);
+ sp_i2cm_dma_go_set(sr_dma);
+
+
+ ret = wait_event_timeout(pstSpI2CInfo->wait,
+ pstIrqEvent->stIrqDmaFlag.bDmaDone, (I2C_SLEEP_TIMEOUT * HZ) / 200);
+ if (ret == 0) {
+ DBG_ERR("I2C DMA write timeout !!\n");
+ ret = I2C_ERR_TIMEOUT_OUT;
+ } else {
+ ret = pstIrqEvent->bRet;
+ }
+ sp_i2cm_status_clear(sr, 0xFFFFFFFF);
+
+ if (dma_w_addr != pstSpI2CInfo->dma_phy_base)
+ dma_unmap_single(pstSpI2CInfo->dev, dma_w_addr,
+ pstCmdInfo->dWrDataCnt, DMA_TO_DEVICE);
+
+
+
+ pstIrqEvent->eRWState = I2C_IDLE_STATE;
+ pstIrqEvent->bI2CBusy = 0;
+
+ sp_i2cm_reset(sr);
+
+ return ret;
+}
+
+int sp_i2cm_dma_read(struct I2C_Cmd_t_ *pstCmdInfo, struct SpI2C_If_t_ *pstSpI2CInfo)
+{
+ struct regs_i2cm_s *sr = (struct regs_i2cm_s *)pstSpI2CInfo->i2c_regs;
+ struct regs_i2cm_dma_s *sr_dma = (struct regs_i2cm_dma_s *)pstSpI2CInfo->i2c_dma_regs;
+ struct I2C_Irq_Event_t_ *pstIrqEvent = &(pstSpI2CInfo->stIrqEvent);
+
+ struct Moon_RegBase_s *pstMoonRegBase = &stMoonRegBase;
+ unsigned char w_data[32] = {0};
+ unsigned int read_cnt = 0;
+ unsigned int write_cnt = 0;
+ unsigned int int0 = 0, int1 = 0, int2 = 0;
+ unsigned int dma_int = 0;
+ int ret = I2C_SUCCESS;
+ int i = 0;
+ dma_addr_t dma_r_addr = 0;
+
+ FUNC_DEBUG();
+
+ if (pstCmdInfo->dDevId > I2C_MASTER_NUM)
+ return I2C_ERR_INVALID_DEVID;
+
+ if (pstSpI2CInfo->mode == I2C_POWER_ALL_SWITCH) {
+ pstMoonRegBase->moon0_regs = (void __iomem *)MOON0_BASE;
+ sp_i2cm_enable(0, pstMoonRegBase->moon0_regs);
+ }
+
+
+ if (pstIrqEvent->bI2CBusy) {
+ DBG_ERR("I2C is busy !!\n");
+ return I2C_ERR_I2C_BUSY;
+ }
+
+ memset(pstIrqEvent, 0, sizeof(*pstIrqEvent));
+ pstIrqEvent->bI2CBusy = 1;
+
+ write_cnt = pstCmdInfo->dWrDataCnt;
+ read_cnt = pstCmdInfo->dRdDataCnt;
+
+ if (pstCmdInfo->dRestartEn) {
+ if (write_cnt > 32) {
+ pstIrqEvent->bI2CBusy = 0;
+ DBG_ERR("I2C write count is invalid !! write count=%d\n", write_cnt);
+ return I2C_ERR_INVALID_CNT;
+ }
+ }
+
+ if ((read_cnt > 0xFFFF) || (read_cnt == 0)) {
+ pstIrqEvent->bI2CBusy = 0;
+ DBG_ERR("I2C read count is invalid !! read count=%d\n", read_cnt);
+ return I2C_ERR_INVALID_CNT;
+ }
+
+ DBG_INFO("write_cnt = %d, DMA read_cnt = %d\n",
+ write_cnt, read_cnt);
+
+ dma_r_addr = dma_map_single(pstSpI2CInfo->dev, pstCmdInfo->pRdData,
+ pstCmdInfo->dRdDataCnt, DMA_FROM_DEVICE);
+
+
+ if (dma_mapping_error(pstSpI2CInfo->dev, dma_r_addr)) {
+ DBG_ERR("I2C dma_r_addr fail\n");
+ dma_r_addr = pstSpI2CInfo->dma_phy_base;
+ }
+
+
+ int0 = (I2C_EN0_SCL_HOLD_TOO_LONG_INT | I2C_EN0_EMPTY_INT | I2C_EN0_DATA_NACK_INT
+ | I2C_EN0_ADDRESS_NACK_INT | I2C_EN0_DONE_INT);
+
+ dma_int = I2C_DMA_EN_DMA_DONE_INT;
+
+ pstIrqEvent->eRWState = I2C_DMA_READ_STATE;
+
+ pstIrqEvent->dDataIndex = 0;
+ pstIrqEvent->dRegDataIndex = 0;
+ pstIrqEvent->dDataTotalLen = read_cnt;
+
+ sp_i2cm_reset(sr);
+ sp_i2cm_dma_mode_enable(sr);
+ sp_i2cm_clock_freq_set(sr, pstCmdInfo->dFreq);
+ sp_i2cm_slave_addr_set(sr, pstCmdInfo->dSlaveAddr);
+
+ #ifdef I2C_RETEST
+ if ((test_count > 1) && (test_count%3 == 0)) {
+ DBG_INFO("test_count = %d", test_count);
+ sp_i2cm_scl_delay_set(sr, 0x01);
+ } else {
+ sp_i2cm_scl_delay_set(sr, I2C_SCL_DELAY);
+ }
+ #endif
+
+ if (pstCmdInfo->dRestartEn) {
+ DBG_INFO("I2C_RESTART_MODE\n");
+ sp_i2cm_active_mode_set(sr, I2C_TRIGGER);
+ sp_i2cm_rw_mode_set(sr, I2C_RESTART_MODE);
+ sp_i2cm_trans_cnt_set(sr, write_cnt, read_cnt);
+ for (i = 0; i < write_cnt; i++)
+ w_data[i] = pstCmdInfo->pWrData[i];
+
+ sp_i2cm_data_set(sr, (unsigned int *)w_data);
+ } else {
+ DBG_INFO("I2C_READ_MODE\n");
+ sp_i2cm_active_mode_set(sr, I2C_AUTO);
+ sp_i2cm_rw_mode_set(sr, I2C_READ_MODE);
+ }
+
+ sp_i2cm_int_en0_set(sr, int0);
+ sp_i2cm_int_en1_set(sr, int1);
+ sp_i2cm_int_en2_set(sr, int2);
+
+ sp_i2cm_dma_addr_set(sr_dma, (unsigned int)dma_r_addr);
+ sp_i2cm_dma_length_set(sr_dma, pstCmdInfo->dRdDataCnt);
+ sp_i2cm_dma_rw_mode_set(sr_dma, I2C_DMA_WRITE_MODE);
+ sp_i2cm_dma_int_en_set(sr_dma, dma_int);
+ sp_i2cm_dma_go_set(sr_dma);
+
+
+ if (pstCmdInfo->dRestartEn)
+ sp_i2cm_manual_trigger(sr); //start send data
+
+
+ ret = wait_event_timeout(pstSpI2CInfo->wait,
+ pstIrqEvent->stIrqDmaFlag.bDmaDone, (I2C_SLEEP_TIMEOUT * HZ) / 200);
+
+ if (ret == 0) {
+ DBG_ERR("I2C DMA read timeout !!\n");
+ ret = I2C_ERR_TIMEOUT_OUT;
+ } else {
+ ret = pstIrqEvent->bRet;
+ }
+ sp_i2cm_status_clear(sr, 0xFFFFFFFF);
+
+ //copy data from virtual addr to pstCmdInfo->pRdData
+
+ if (dma_r_addr == pstSpI2CInfo->dma_phy_base)
+ memcpy(pstCmdInfo->pRdData, pstSpI2CInfo->dma_vir_base, pstCmdInfo->dRdDataCnt);
+ else
+ dma_unmap_single(pstSpI2CInfo->dev,
+ dma_r_addr, pstCmdInfo->dRdDataCnt, DMA_FROM_DEVICE);
+
+ pstIrqEvent->eRWState = I2C_IDLE_STATE;
+ pstIrqEvent->bI2CBusy = 0;
+
+
+ sp_i2cm_reset(sr);
+ return ret;
+}
+
+
+
+static int sp_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = adap->algo_data;
+ struct I2C_Cmd_t_ *pstCmdInfo = &(pstSpI2CInfo->stCmdInfo);
+ int ret = I2C_SUCCESS;
+ int i = 0;
+ unsigned char restart_w_data[32] = {0};
+ unsigned int restart_write_cnt = 0;
+ unsigned int restart_en = 0;
+
+ FUNC_DEBUG();
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+ ret = pm_runtime_get_sync(&adap->dev);
+ if (ret < 0)
+ goto out;
+#endif
+ if (num == 0)
+ return -EINVAL;
+
+ memset(pstCmdInfo, 0, sizeof(*pstCmdInfo));
+ pstCmdInfo->dDevId = adap->nr;
+
+ if (pstCmdInfo->dFreq > I2C_FREQ)
+ pstCmdInfo->dFreq = I2C_FREQ;
+ else
+ pstCmdInfo->dFreq = pstSpI2CInfo->i2c_clk_freq/1000;
+
+ DBG_INFO("[I2C] set freq : %d\n", pstCmdInfo->dFreq);
+
+ for (i = 0; i < num; i++) {
+ if (msgs[i].flags & I2C_M_TEN)
+ return -EINVAL;
+
+ pstCmdInfo->dSlaveAddr = msgs[i].addr;
+
+ if (msgs[i].flags & I2C_M_NOSTART) {
+
+ restart_write_cnt = msgs[i].len;
+ for (i = 0; i < restart_write_cnt; i++)
+ restart_w_data[i] = msgs[i].buf[i];
+
+ restart_en = 1;
+ continue;
+ }
+
+ if (msgs[i].flags & I2C_M_RD) {
+ if (restart_en == 1) {
+ pstCmdInfo->dWrDataCnt = restart_write_cnt;
+ pstCmdInfo->pWrData = restart_w_data;
+ DBG_INFO("I2C_M_RD dWrDataCnt =%d ", pstCmdInfo->dWrDataCnt);
+ DBG_INFO("I2C_M_RD pWrData[0] =%x ", pstCmdInfo->pWrData[0]);
+ DBG_INFO("I2C_M_RD pWrData[1] =%x ", pstCmdInfo->pWrData[1]);
+ restart_en = 0;
+ pstCmdInfo->dRestartEn = 1;
+ }
+ pstCmdInfo->dRdDataCnt = msgs[i].len;
+ pstCmdInfo->pRdData = i2c_get_dma_safe_msg_buf(&msgs[i], 4);
+
+ if ((pstCmdInfo->dRdDataCnt < 4) || (!pstCmdInfo->pRdData)) {
+ pstCmdInfo->pRdData = msgs[i].buf;
+ ret = sp_i2cm_read(pstCmdInfo, pstSpI2CInfo);
+ } else {
+ ret = sp_i2cm_dma_read(pstCmdInfo, pstSpI2CInfo);
+ i2c_put_dma_safe_msg_buf(pstCmdInfo->pRdData, &msgs[i], true);
+ }
+
+ } else {
+ pstCmdInfo->dWrDataCnt = msgs[i].len;
+ pstCmdInfo->pWrData = i2c_get_dma_safe_msg_buf(&msgs[i], 4);
+ if ((pstCmdInfo->dWrDataCnt < 4) || (!pstCmdInfo->pWrData)) {
+ pstCmdInfo->pWrData = msgs[i].buf;
+ ret = sp_i2cm_write(pstCmdInfo, pstSpI2CInfo);
+ } else {
+ ret = sp_i2cm_dma_write(pstCmdInfo, pstSpI2CInfo);
+ i2c_put_dma_safe_msg_buf(pstCmdInfo->pWrData,
+ &msgs[i], true);
+ }
+ }
+
+ if (ret != I2C_SUCCESS)
+ return -EIO;
+ }
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+ pm_runtime_put(&adap->dev);
+
+#endif
+
+ return num;
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+out:
+ pm_runtime_mark_last_busy(&adap->dev);
+ pm_runtime_put_autosuspend(&adap->dev);
+ return num;
+#endif
+
+}
+
+static u32 sp_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm sp_algorithm = {
+ .master_xfer = sp_master_xfer,
+ .functionality = sp_functionality,
+};
+
+static int sp_i2c_probe(struct platform_device *pdev)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo;
+ struct i2c_adapter *p_adap;
+ unsigned int i2c_clk_freq;
+ int device_id = 0;
+ int ret = I2C_SUCCESS;
+ struct device *dev = &pdev->dev;
+ const struct i2c_compatible *dev_mode;
+
+ FUNC_DEBUG();
+
+ if (pdev->dev.of_node) {
+ pdev->id = of_alias_get_id(pdev->dev.of_node, "i2c");
+ DBG_INFO("[I2C adapter] pdev->id=%d\n", pdev->id);
+ device_id = pdev->id;
+ }
+
+ pstSpI2CInfo = devm_kzalloc(&pdev->dev, sizeof(*pstSpI2CInfo), GFP_KERNEL);
+ if (!pstSpI2CInfo)
+ return -ENOMEM;
+
+ if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", &i2c_clk_freq)) {
+ dev_dbg(&pdev->dev, "clk_freq %d\n", i2c_clk_freq);
+ pstSpI2CInfo->i2c_clk_freq = i2c_clk_freq;
+ } else
+ pstSpI2CInfo->i2c_clk_freq = I2C_FREQ*1000;
+
+ DBG_INFO("[I2C adapter] get freq : %d\n", pstSpI2CInfo->i2c_clk_freq);
+
+ pstSpI2CInfo->dev = &pdev->dev;
+
+ ret = _sp_i2cm_get_resources(pdev, pstSpI2CInfo);
+ if (ret != I2C_SUCCESS) {
+ DBG_ERR("[I2C adapter] get resources fail !\n");
+ return ret;
+ }
+
+ pstSpI2CInfo->clk = devm_clk_get(dev, NULL);
+
+ if (IS_ERR(pstSpI2CInfo->clk)) {
+ ret = PTR_ERR(pstSpI2CInfo->clk);
+ dev_err(dev, "failed to retrieve clk: %d\n", ret);
+ goto err_clk_disable;
+ }
+ ret = clk_prepare_enable(pstSpI2CInfo->clk);
+
+ if (ret) {
+ dev_err(dev, "failed to enable clk: %d\n", ret);
+ goto err_clk_disable;
+ }
+
+ pstSpI2CInfo->rstc = devm_reset_control_get(dev, NULL);
+
+ if (IS_ERR(pstSpI2CInfo->rstc)) {
+ ret = PTR_ERR(pstSpI2CInfo->rstc);
+ dev_err(dev, "failed to retrieve reset controller: %d\n", ret);
+ goto err_reset_assert;
+ }
+ ret = reset_control_deassert(pstSpI2CInfo->rstc);
+
+ if (ret) {
+ dev_err(dev, "failed to deassert reset line: %d\n", ret);
+ goto err_reset_assert;
+ }
+
+ /* dma alloc*/
+ pstSpI2CInfo->dma_vir_base = dma_alloc_coherent(&pdev->dev, I2C_BUFFER_SIZE,
+ &pstSpI2CInfo->dma_phy_base, GFP_ATOMIC);
+ if (!pstSpI2CInfo->dma_vir_base)
+ goto free_dma;
+
+ ret = _sp_i2cm_init(device_id, pstSpI2CInfo);
+ if (ret != 0) {
+ DBG_ERR("[I2C adapter] i2c master %d init error\n", device_id);
+ return ret;
+ }
+
+ init_waitqueue_head(&pstSpI2CInfo->wait);
+
+ dev_mode = of_device_get_match_data(&pdev->dev);
+ pstSpI2CInfo->mode = dev_mode->mode;
+ p_adap = &pstSpI2CInfo->adap;
+ sprintf(p_adap->name, "%s%d", DEVICE_NAME, device_id);
+ p_adap->algo = &sp_algorithm;
+ p_adap->algo_data = pstSpI2CInfo;
+ p_adap->nr = device_id;
+ p_adap->class = 0;
+ p_adap->retries = 5;
+ p_adap->dev.parent = &pdev->dev;
+ p_adap->dev.of_node = pdev->dev.of_node;
+
+ ret = i2c_add_numbered_adapter(p_adap);
+ if (ret < 0) {
+ DBG_ERR("[I2C adapter] error add adapter %s\n", p_adap->name);
+ goto free_dma;
+ } else {
+ DBG_INFO("[I2C adapter] add adapter %s success\n", p_adap->name);
+ platform_set_drvdata(pdev, pstSpI2CInfo);
+ }
+
+ ret = request_irq(pstSpI2CInfo->irq, _sp_i2cm_irqevent_handler, IRQF_TRIGGER_HIGH,
+ p_adap->name, pstSpI2CInfo);
+ if (ret) {
+ DBG_ERR("request irq fail !!\n");
+ return I2C_ERR_REQUESET_IRQ;
+ }
+
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 5000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+#endif
+
+ return ret;
+
+free_dma:
+ dma_free_coherent(&pdev->dev, I2C_BUFFER_SIZE,
+ pstSpI2CInfo->dma_vir_base, pstSpI2CInfo->dma_phy_base);
+
+err_reset_assert:
+ reset_control_assert(pstSpI2CInfo->rstc);
+
+err_clk_disable:
+ clk_disable_unprepare(pstSpI2CInfo->clk);
+
+ return ret;
+}
+
+static int sp_i2c_remove(struct platform_device *pdev)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = platform_get_drvdata(pdev);
+ struct i2c_adapter *p_adap = &pstSpI2CInfo->adap;
+
+ FUNC_DEBUG();
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+#endif
+
+ dma_free_coherent(&pdev->dev, I2C_BUFFER_SIZE,
+ pstSpI2CInfo->dma_vir_base, pstSpI2CInfo->dma_phy_base);
+
+ i2c_del_adapter(p_adap);
+ if (p_adap->nr < I2C_MASTER_NUM) {
+ clk_disable_unprepare(pstSpI2CInfo->clk);
+ reset_control_assert(pstSpI2CInfo->rstc);
+ free_irq(pstSpI2CInfo->irq, NULL);
+ }
+
+ return 0;
+}
+
+static int sp_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = platform_get_drvdata(pdev);
+ struct i2c_adapter *p_adap = &pstSpI2CInfo->adap;
+
+ FUNC_DEBUG();
+
+ if (p_adap->nr < I2C_MASTER_NUM)
+ reset_control_assert(pstSpI2CInfo->rstc);
+
+ return 0;
+}
+
+static int sp_i2c_resume(struct platform_device *pdev)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = platform_get_drvdata(pdev);
+ struct i2c_adapter *p_adap = &pstSpI2CInfo->adap;
+
+ FUNC_DEBUG();
+
+ if (p_adap->nr < I2C_MASTER_NUM) {
+ reset_control_deassert(pstSpI2CInfo->rstc); //release reset
+ clk_prepare_enable(pstSpI2CInfo->clk); //enable clken and disable gclken
+ }
+
+ return 0;
+}
+
+static const struct i2c_compatible i2c_7021_compat = {
+ .mode = I2C_POWER_ALL_SWITCH,
+};
+
+static const struct i2c_compatible i2c_645_compat = {
+ .mode = I2C_POWER_NO_SWITCH,
+};
+
+
+static const struct of_device_id sp_i2c_of_match[] = {
+ { .compatible = "sunplus,sp7021-i2cm",
+ .data = &i2c_7021_compat, },
+ { .compatible = "sunplus,q645-i2cm",
+ .data = &i2c_645_compat, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sp_i2c_of_match);
+
+#ifdef CONFIG_PM_RUNTIME_I2C
+static int sp_i2c_runtime_suspend(struct device *dev)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = dev_get_drvdata(dev);
+ struct i2c_adapter *p_adap = &pstSpI2CInfo->adap;
+
+ FUNC_DEBUG();
+
+ if (p_adap->nr < I2C_MASTER_NUM)
+ reset_control_assert(pstSpI2CInfo->rstc);
+
+ return 0;
+}
+
+static int sp_i2c_runtime_resume(struct device *dev)
+{
+ struct SpI2C_If_t_ *pstSpI2CInfo = dev_get_drvdata(dev);
+ struct i2c_adapter *p_adap = &pstSpI2CInfo->adap;
+
+ FUNC_DEBUG();
+
+ if (p_adap->nr < I2C_MASTER_NUM) {
+ reset_control_deassert(pstSpI2CInfo->rstc); //release reset
+ clk_prepare_enable(pstSpI2CInfo->clk); //enable clken and disable gclken
+ }
+
+ return 0;
+}
+static const struct dev_pm_ops sp7021_i2c_pm_ops = {
+ .runtime_suspend = sp_i2c_runtime_suspend,
+ .runtime_resume = sp_i2c_runtime_resume,
+};
+
+#define sp_i2c_pm_ops (&sp7021_i2c_pm_ops)
+#endif
+
+static struct platform_driver sp_i2c_driver = {
+ .probe = sp_i2c_probe,
+ .remove = sp_i2c_remove,
+ .suspend = sp_i2c_suspend,
+ .resume = sp_i2c_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DEVICE_NAME,
+ .of_match_table = sp_i2c_of_match,
+#ifdef CONFIG_PM_RUNTIME_I2C
+ .pm = sp_i2c_pm_ops,
+#endif
+ },
+};
+
+static int __init sp_i2c_adap_init(void)
+{
+ return platform_driver_register(&sp_i2c_driver);
+}
+module_init(sp_i2c_adap_init);
+
+static void __exit sp_i2c_adap_exit(void)
+{
+ platform_driver_unregister(&sp_i2c_driver);
+}
+module_exit(sp_i2c_adap_exit);
+
+MODULE_AUTHOR("lH Kuo <lh.kuo@...plus.com>");
+MODULE_DESCRIPTION("Sunplus I2c controller driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Powered by blists - more mailing lists