[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAHCN7xJnvujdLDznezajSYQqRO=-V+2kxdTUt-b_Wd2povwHJA@mail.gmail.com>
Date: Fri, 29 Oct 2021 12:22:14 -0500
From: Adam Ford <aford173@...il.com>
To: arm-soc <linux-arm-kernel@...ts.infradead.org>
Cc: Adam Ford-BE <aford@...conembedded.com>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Lucas Stach <l.stach@...gutronix.de>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Tim Harvey <tharvey@...eworks.com>, Peng Fan <peng.fan@....com>
Subject: Re: [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals
On Sat, Oct 9, 2021 at 11:27 AM Adam Ford <aford173@...il.com> wrote:
>
> The blk-ctrl and the GPCv2 in the i.MX8MN is similar but slightly different to that
> of the i.MX8MM. This series is based on work from Lucas Stach for i.MX8MM, but
> adapted for i.MX8MN. With the additional power domains and blk-ctrl enabled,
> additional peripherals like gpu and USB can be enabled.
>
> V2: Add mising patches for expanding GPCv2 which are necessary
> to make the blk-ctl operate.
> Fix clk names
> Fix missing references to structures in blk-ctl driver to link
> them to the device tree.
>
I know Rob had some feedback on the DT bindings updates. I can
address them in V3, I was hoping to get some feedback from this series
from others who may be interested.
I don't know if it's too late to get this into 5.16 or not, but I'll
submit a V3 this weekend.
adam
> Adam Ford (9):
> soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
> soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
> dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
> dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
> soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
> arm64: dts: imx8mn: add GPC node
> arm64: dts: imx8mn: put USB controller into power-domains
> arm64: dts: imx8mn: add DISP blk-ctrl
> arm64: dts: imx8mn: Enable GPU
>
> .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 103 ++++++++++++++++++
> drivers/soc/imx/gpcv2.c | 26 +++++
> drivers/soc/imx/imx8m-blk-ctrl.c | 75 ++++++++++++-
> include/dt-bindings/power/imx8mn-power.h | 5 +
> 5 files changed, 305 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
> --
> 2.25.1
>
Powered by blists - more mailing lists