| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 30 Oct 2021 13:08:58 +0200
From: Eugene Shalygin <eugene.shalygin@...il.com>
To: Denis Pauk <pauk.denis@...il.com>
Cc: Andy Shevchenko <andy.shevchenko@...il.com>,
Platform Driver <platform-driver-x86@...r.kernel.org>,
thomas@...ssschuh.net,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Tor Vic <torvic9@...lbox.org>,
Oleksandr Natalenko <oleksandr@...alenko.name>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Jonathan Corbet <corbet@....net>, linux-hwmon@...r.kernel.org,
Linux Documentation List <linux-doc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v9 1/2] hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.
Hi, Denis and All,
I've got info for the ROG STRIX B550-I GAMING board from a user in the
Libre hardware monitor project. It fills one gap in the EC sensors
layout. The changeset is available here:
https://github.com/zeule/asus-ec-sensors/commit/aa8d483706a76d04698cd0d50b53cd3d7e3fc865
Regards,
Eugene
On Sat, 30 Oct 2021 at 11:17, Denis Pauk <pauk.denis@...il.com> wrote:
>
> Linux HWMON sensors driver for ASUS motherboards to read
> sensors from the embedded controller.
>
> Many ASUS motherboards do not publish all the available
> sensors via the Super I/O chip but the missing ones are
> available through the embedded controller (EC) registers.
>
> This driver implements reading those sensor data via the
> WMI method BREC, which is known to be present in all ASUS
> motherboards based on the AMD 500 series chipsets (and
> probably is available in other models too). The driver
> needs to know exact register addresses for the sensors and
> thus support for each motherboard has to be added explicitly.
>
> The EC registers do not provide critical values for the
> sensors and as such they are not published to the HWMON.
>
> Supported motherboards:
> * PRIME X570-PRO
> * Pro WS X570-ACE
> * ROG CROSSHAIR VIII HERO
> * ROG CROSSHAIR VIII DARK HERO
> * ROG CROSSHAIR VIII FORMULA
> * ROG STRIX X570-E GAMING
> * ROG STRIX B550-E GAMING
>
> Signed-off-by: Denis Pauk <pauk.denis@...il.com>
> Co-developed-by: Eugene Shalygin <eugene.shalygin@...il.com>
> Signed-off-by: Eugene Shalygin <eugene.shalygin@...il.com>
> Co-developed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> Tested-by: Tor Vic <torvic9@...lbox.org>
> Tested-by: Oleksandr Natalenko <oleksandr@...alenko.name>
>
> ---
> Changes in v9:
> - Fix memory leaks in asus_wmi_ec_block_read()
> - Fix buffer and parameter lengths in decode and encode algorithms
> - Simplify encoding in read query
> - Reshuffle structures to make pointer arithmetics simpler or
> no-op in some cases
> - Shuffle parameters in some functions to make it more logical
> - Use temporary variable for EC info data structure
> - Many indentation fixes to improve readability (breaks 80 characters rule)
>
> Changes in v8:
> - Fix codestyle in defines and comments.
> - Fix buffer length calculation.
> - Use hex2bin/bin2hex for convert values in buffers.
> - Remove unrequired acpi_os_free usage.
> - Call mutex_lock inside of functions.
>
> Changes in v7:
> - Use dmi_first_match for directly get sensors list by board.
> - Add depends on ACPI_WMI to Kconfig.
> - Add response buffer size check in asus_wmi_ec_decode_reply_buffer.
> - Clean up defines names.
>
> Changes in v6:
> - Generate query for all sensors on sensors setup
> - Move binary to sensor value logic to separate get_sensor_value
> (by Eugene Shalygin)
> - Add asus_wmi_ec_sensor to documentation index.
> - Use acpi_os_free without NULL pointer check.
>
> Changes in v5:
> - Fixes build issue reported by kernel test robot with disabled ACPI_WMI.
>
> Changes in v4:
> - implement wmi driver instead platform driver.
>
> Changes in v3:
> - Use MODULE_DEVICE_TABLE for match devices.
> - Use get_unaligned_be32 instead incorrectly used get_unaligned_le32.
> - Add documentaion for driver.
>
> Changes in v2:
> - Use utf8s_to_utf16s/utf16s_to_utf8s instead handmade fuctions.
> - Use post increment.
> - Use get_unaligned* for convert values.
> - Use PTR_ERR_OR_ZERO.
> - Specify per-board sensors in a declarative way (by Eugene Shalygin).
> ---
> Documentation/hwmon/asus_wmi_ec_sensors.rst | 35 ++
> Documentation/hwmon/index.rst | 1 +
> MAINTAINERS | 7 +
> drivers/hwmon/Kconfig | 12 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/asus_wmi_ec_sensors.c | 612 ++++++++++++++++++++
> 6 files changed, 668 insertions(+)
> create mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst
> create mode 100644 drivers/hwmon/asus_wmi_ec_sensors.c
>
> diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst
> new file mode 100644
> index 000000000000..7edf08579baa
> --- /dev/null
> +++ b/Documentation/hwmon/asus_wmi_ec_sensors.rst
> @@ -0,0 +1,35 @@
> +Kernel driver asus_wmi_ec_sensors
> +=================================
> +
> +Supported boards:
> + * PRIME X570-PRO,
> + * Pro WS X570-ACE,
> + * ROG CROSSHAIR VIII DARK HERO,
> + * ROG CROSSHAIR VIII FORMULA,
> + * ROG CROSSHAIR VIII HERO,
> + * ROG STRIX B550-E GAMING,
> + * ROG STRIX X570-E GAMING.
> +
> +Authors:
> + - Eugene Shalygin <eugene.shalygin@...il.com>
> +
> +Description:
> +------------
> +ASUS mainboards publish hardware monitoring information via Super I/O
> +chip and the ACPI embedded controller (EC) registers. Some of the sensors
> +are only available via the EC.
> +
> +ASUS WMI interface provides a method (BREC) to read data from EC registers,
> +which is utilized by this driver to publish those sensor readings to the
> +HWMON system. The driver is aware of and reads the following sensors:
> +
> +1. Chipset (PCH) temperature
> +2. CPU package temperature
> +3. Motherboard temperature
> +4. Readings from the T_Sensor header
> +5. VRM temperature
> +6. CPU_Opt fan RPM
> +7. Chipset fan RPM
> +8. Readings from the "Water flow meter" header (RPM)
> +9. Readings from the "Water In" and "Water Out" temperature headers
> +10. CPU current
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 7046bf1870d9..23deb1a1202f 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -43,6 +43,7 @@ Hardware Monitoring Kernel Drivers
> asb100
> asc7621
> aspeed-pwm-tacho
> + asus_wmi_ec_sensors
> bcm54140
> bel-pfe
> bpa-rs600
> diff --git a/MAINTAINERS b/MAINTAINERS
> index cc5eaf4e65dc..05448435991d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2937,6 +2937,13 @@ W: http://acpi4asus.sf.net
> F: drivers/platform/x86/asus*.c
> F: drivers/platform/x86/eeepc*.c
>
> +ASUS WMI HARDWARE MONITOR DRIVER
> +M: Eugene Shalygin <eugene.shalygin@...il.com>
> +M: Denis Pauk <pauk.denis@...il.com>
> +L: linux-hwmon@...r.kernel.org
> +S: Maintained
> +F: drivers/hwmon/asus_wmi_ec_sensors.c
> +
> ASUS WIRELESS RADIO CONTROL DRIVER
> M: João Paulo Rechi Vita <jprvita@...il.com>
> L: platform-driver-x86@...r.kernel.org
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 64bd3dfba2c4..01d50fb9da54 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2215,6 +2215,18 @@ config SENSORS_ATK0110
> This driver can also be built as a module. If so, the module
> will be called asus_atk0110.
>
> +config SENSORS_ASUS_WMI_EC
> + tristate "ASUS WMI B550/X570"
> + depends on ACPI_WMI
> + help
> + If you say yes here you get support for the ACPI embedded controller
> + hardware monitoring interface found in B550/X570 ASUS motherboards.
> + This driver will provide readings of fans, voltages and temperatures
> + through the system firmware.
> +
> + This driver can also be built as a module. If so, the module
> + will be called asus_wmi_sensors_ec.
> +
> endif # ACPI
>
> endif # HWMON
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index baee6a8d4dd1..aae2ff5c7335 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID) += hwmon-vid.o
> # APCI drivers
> obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o
> obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
> +obj-$(CONFIG_SENSORS_ASUS_WMI_EC) += asus_wmi_ec_sensors.o
>
> # Native drivers
> # asb100, then w83781d go first, as they can override other drivers' addresses.
> diff --git a/drivers/hwmon/asus_wmi_ec_sensors.c b/drivers/hwmon/asus_wmi_ec_sensors.c
> new file mode 100644
> index 000000000000..9d02023e0c61
> --- /dev/null
> +++ b/drivers/hwmon/asus_wmi_ec_sensors.c
> @@ -0,0 +1,612 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * HWMON driver for ASUS B550/X570 motherboards that publish sensor
> + * values via the embedded controller registers.
> + *
> + * Copyright (C) 2021 Eugene Shalygin <eugene.shalygin@...il.com>
> + * Copyright (C) 2018-2019 Ed Brindley <kernel@...davale.org>
> + *
> + * EC provides:
> + * - Chipset temperature
> + * - CPU temperature
> + * - Motherboard temperature
> + * - T_Sensor temperature
> + * - VRM temperature
> + * - Water In temperature
> + * - Water Out temperature
> + * - CPU Optional Fan RPM
> + * - Chipset Fan RPM
> + * - Water Flow Fan RPM
> + * - CPU current
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/dmi.h>
> +#include <linux/init.h>
> +#include <linux/jiffies.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/nls.h>
> +#include <linux/units.h>
> +#include <linux/wmi.h>
> +
> +#include <asm/unaligned.h>
> +
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
> +#define ASUSWMI_METHODID_BLOCK_READ_EC 0x42524543 /* BREC */
> +/* From the ASUS DSDT source */
> +#define ASUSWMI_BREC_REGISTERS_MAX 16
> +#define ASUSWMI_MAX_BUF_LEN 128
> +#define SENSOR_LABEL_LEN 16
> +
> +static u32 hwmon_attributes[] = {
> + [hwmon_chip] = HWMON_C_REGISTER_TZ,
> + [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
> + [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
> + [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL,
> + [hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL,
> +};
> +
> +struct asus_wmi_ec_sensor_address {
> + u8 index;
> + u8 bank;
> + u8 size;
> +};
> +
> +#define MAKE_SENSOR_ADDRESS(size_i, bank_i, index_i) { \
> + .size = size_i, \
> + .bank = bank_i, \
> + .index = index_i, \
> +}
> +
> +struct ec_sensor_info {
> + struct asus_wmi_ec_sensor_address addr;
> + char label[SENSOR_LABEL_LEN];
> + enum hwmon_sensor_types type;
> +};
> +
> +#define EC_SENSOR(sensor_label, sensor_type, size, bank, index) { \
> + .addr = MAKE_SENSOR_ADDRESS(size, bank, index), \
> + .label = sensor_label, \
> + .type = sensor_type, \
> +}
> +
> +enum known_ec_sensor {
> + SENSOR_TEMP_CHIPSET,
> + SENSOR_TEMP_CPU,
> + SENSOR_TEMP_MB,
> + SENSOR_TEMP_T_SENSOR,
> + SENSOR_TEMP_VRM,
> + SENSOR_FAN_CPU_OPT,
> + SENSOR_FAN_CHIPSET,
> + SENSOR_FAN_WATER_FLOW,
> + SENSOR_CURR_CPU,
> + SENSOR_TEMP_WATER_IN,
> + SENSOR_TEMP_WATER_OUT,
> + SENSOR_MAX
> +};
> +
> +/* All known sensors for ASUS EC controllers */
> +static const struct ec_sensor_info known_ec_sensors[] = {
> + [SENSOR_TEMP_CHIPSET] = EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
> + [SENSOR_TEMP_CPU] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
> + [SENSOR_TEMP_MB] = EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
> + [SENSOR_TEMP_T_SENSOR] = EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
> + [SENSOR_TEMP_VRM] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
> + [SENSOR_FAN_CPU_OPT] = EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
> + [SENSOR_FAN_CHIPSET] = EC_SENSOR("Chipset", hwmon_fan, 2, 0x00, 0xb4),
> + [SENSOR_FAN_WATER_FLOW] = EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc),
> + [SENSOR_CURR_CPU] = EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
> + [SENSOR_TEMP_WATER_IN] = EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
> + [SENSOR_TEMP_WATER_OUT] = EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
> +};
> +
> +struct asus_wmi_data {
> + const enum known_ec_sensor known_board_sensors[SENSOR_MAX + 1];
> +};
> +
> +/* boards with EC support */
> +static struct asus_wmi_data sensors_board_PW_X570_P = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM,
> + SENSOR_FAN_CHIPSET,
> + SENSOR_MAX
> + },
> +};
> +
> +static struct asus_wmi_data sensors_board_PW_X570_A = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM,
> + SENSOR_FAN_CHIPSET,
> + SENSOR_CURR_CPU,
> + SENSOR_MAX
> + },
> +};
> +
> +static struct asus_wmi_data sensors_board_R_C8H = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> + SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
> + SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, SENSOR_FAN_WATER_FLOW,
> + SENSOR_CURR_CPU,
> + SENSOR_MAX
> + },
> +};
> +
> +/* Same as Hero but without chipset fan */
> +static struct asus_wmi_data sensors_board_R_C8DH = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> + SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
> + SENSOR_FAN_CPU_OPT, SENSOR_FAN_WATER_FLOW,
> + SENSOR_CURR_CPU,
> + SENSOR_MAX
> + },
> +};
> +
> +/* Same as Hero but without water */
> +static struct asus_wmi_data sensors_board_R_C8F = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> + SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET,
> + SENSOR_CURR_CPU,
> + SENSOR_MAX
> + },
> +};
> +
> +static struct asus_wmi_data sensors_board_RS_B550_E_G = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> + SENSOR_FAN_CPU_OPT,
> + SENSOR_MAX
> + },
> +};
> +
> +static struct asus_wmi_data sensors_board_RS_X570_E_G = {
> + .known_board_sensors = {
> + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> + SENSOR_FAN_CHIPSET,
> + SENSOR_CURR_CPU,
> + SENSOR_MAX
> + },
> +};
> +
> +#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name, sensors) { \
> + .matches = { \
> + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."), \
> + DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \
> + }, \
> + .driver_data = sensors, \
> +}
> +
> +static const struct dmi_system_id asus_wmi_ec_dmi_table[] = {
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X570-PRO", &sensors_board_PW_X570_P),
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", &sensors_board_PW_X570_A),
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII DARK HERO", &sensors_board_R_C8DH),
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII FORMULA", &sensors_board_R_C8F),
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII HERO", &sensors_board_R_C8H),
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-E GAMING", &sensors_board_RS_B550_E_G),
> + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X570-E GAMING", &sensors_board_RS_X570_E_G),
> + {}
> +};
> +MODULE_DEVICE_TABLE(dmi, asus_wmi_ec_dmi_table);
> +
> +struct ec_sensor {
> + enum known_ec_sensor info_index;
> + u32 cached_value;
> +};
> +
> +/**
> + * struct asus_wmi_ec_info - sensor info.
> + * @sensors: list of sensors.
> + * @read_arg: UTF-16LE string to pass to BRxx() WMI function.
> + * @read_buffer: decoded output from WMI result.
> + * @nr_sensors: number of board EC sensors.
> + * @nr_registers: number of EC registers to read (sensor might span more than 1 register).
> + * @last_updated: in jiffies.
> + */
> +struct asus_wmi_ec_info {
> + struct ec_sensor sensors[SENSOR_MAX];
> + char read_arg[(ASUSWMI_BREC_REGISTERS_MAX * 4 + 1) * 2];
> + u8 read_buffer[ASUSWMI_BREC_REGISTERS_MAX];
> + unsigned int nr_sensors;
> + unsigned int nr_registers;
> + unsigned long last_updated;
> +};
> +
> +struct asus_wmi_sensors {
> + struct asus_wmi_ec_info ec;
> + /* lock access to internal cache */
> + struct mutex lock;
> +};
> +
> +static int asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec,
> + const enum known_ec_sensor *bsi)
> +{
> + struct ec_sensor *s = ec->sensors;
> + int i;
> +
> + ec->nr_sensors = 0;
> + ec->nr_registers = 0;
> +
> + for (i = 0; bsi[i] != SENSOR_MAX; i++) {
> + s[i].info_index = bsi[i];
> + ec->nr_sensors++;
> + ec->nr_registers += known_ec_sensors[bsi[i]].addr.size;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * The next four functions convert to or from BRxx string argument format.
> + * The format of the string is as follows:
> + * - The string consists of two-byte UTF-16LE characters.
> + * - The value of the very first byte in the string is equal to the total
> + * length of the next string in bytes, thus excluding the first two-byte
> + * character.
> + * - The rest of the string encodes the pairs of (bank, index) pairs, where
> + * both values are byte-long (0x00 to 0xFF).
> + * - Numbers are encoded as UTF-16LE hex values.
> + */
> +static int asus_wmi_ec_decode_reply_buffer(const u8 *in, u32 length, u8 *out)
> +{
> + char buffer[ASUSWMI_MAX_BUF_LEN * 2];
> + u32 len = min_t(u32, get_unaligned_le16(in), length - 2);
> +
> + utf16s_to_utf8s((wchar_t *)(in + 2), len / 2, UTF16_LITTLE_ENDIAN, buffer, sizeof(buffer));
> +
> + return hex2bin(out, buffer, len / 4);
> +}
> +
> +static void asus_wmi_ec_encode_registers(const u8 *in, u32 len, char *out)
> +{
> + char buffer[ASUSWMI_MAX_BUF_LEN * 2];
> +
> + bin2hex(buffer, in, len);
> +
> + utf8s_to_utf16s(buffer, len * 2, UTF16_LITTLE_ENDIAN, (wchar_t *)(out + 2), len * 2);
> +
> + put_unaligned_le16(len * 4, out);
> +}
> +
> +static void asus_wmi_ec_make_block_read_query(struct asus_wmi_ec_info *ec)
> +{
> + u8 registers[ASUSWMI_BREC_REGISTERS_MAX * 2];
> + const struct ec_sensor_info *si;
> + int i, j, offset;
> +
> + offset = 0;
> + for (i = 0; i < ec->nr_sensors; i++) {
> + si = &known_ec_sensors[ec->sensors[i].info_index];
> + for (j = 0; j < si->addr.size; j++) {
> + registers[offset++] = si->addr.bank;
> + registers[offset++] = si->addr.index + j;
> + }
> + }
> +
> + asus_wmi_ec_encode_registers(registers, offset, ec->read_arg);
> +}
> +
> +static int asus_wmi_ec_block_read(u32 method_id, char *query, u8 *out)
> +{
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + struct acpi_buffer input;
> + union acpi_object *obj;
> + acpi_status status;
> + int ret;
> +
> + /* The first byte of the BRxx() argument string has to be the string size. */
> + input.length = query[0] + 2;
> + input.pointer = query;
> + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input, &output);
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = output.pointer;
> + if (!obj)
> + return -EIO;
> +
> + ret = -EIO;
> + if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < 2)
> + goto out_free_obj;
> +
> + ret = asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, obj->buffer.length, out);
> +
> +out_free_obj:
> + ACPI_FREE(obj);
> + return ret;
> +}
> +
> +static inline u32 get_sensor_value(const struct ec_sensor_info *si, u8 *data)
> +{
> + switch (si->addr.size) {
> + case 1:
> + return *data;
> + case 2:
> + return get_unaligned_be16(data);
> + case 4:
> + return get_unaligned_be32(data);
> + default:
> + return 0;
> + }
> +}
> +
> +static void asus_wmi_ec_update_ec_sensors(struct asus_wmi_ec_info *ec)
> +{
> + const struct ec_sensor_info *si;
> + struct ec_sensor *s;
> + u8 i_sensor;
> + u8 *data;
> +
> + data = ec->read_buffer;
> + for (i_sensor = 0; i_sensor < ec->nr_sensors; i_sensor++) {
> + s = &ec->sensors[i_sensor];
> + si = &known_ec_sensors[s->info_index];
> + s->cached_value = get_sensor_value(si, data);
> + data += si->addr.size;
> + }
> +}
> +
> +static int asus_wmi_ec_scale_sensor_value(u32 value, int data_type)
> +{
> + switch (data_type) {
> + case hwmon_curr:
> + case hwmon_temp:
> + case hwmon_in:
> + return value * MILLI;
> + default:
> + return value;
> + }
> +}
> +
> +static int asus_wmi_ec_find_sensor_index(const struct asus_wmi_ec_info *ec,
> + enum hwmon_sensor_types type, int channel)
> +{
> + int i;
> +
> + for (i = 0; i < ec->nr_sensors; i++) {
> + if (known_ec_sensors[ec->sensors[i].info_index].type == type) {
> + if (channel == 0)
> + return i;
> +
> + channel--;
> + }
> + }
> + return -EINVAL;
> +}
> +
> +static int asus_wmi_ec_get_cached_value_or_update(struct asus_wmi_sensors *sensor_data,
> + int sensor_index,
> + u32 *value)
> +{
> + struct asus_wmi_ec_info *ec = &sensor_data->ec;
> + int ret;
> +
> + mutex_lock(&sensor_data->lock);
> +
> + if (time_after(jiffies, ec->last_updated + HZ)) {
> + ret = asus_wmi_ec_block_read(ASUSWMI_METHODID_BLOCK_READ_EC,
> + ec->read_arg, ec->read_buffer);
> + if (ret)
> + goto unlock;
> +
> + asus_wmi_ec_update_ec_sensors(ec);
> + ec->last_updated = jiffies;
> + }
> +
> + *value = ec->sensors[sensor_index].cached_value;
> +
> +unlock:
> + mutex_unlock(&sensor_data->lock);
> +
> + return ret;
> +}
> +
> +/* Now follow the functions that implement the hwmon interface */
> +
> +static int asus_wmi_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
> + struct asus_wmi_ec_info *ec = &sensor_data->ec;
> + int ret, sidx, info_index;
> + u32 value = 0;
> +
> + sidx = asus_wmi_ec_find_sensor_index(ec, type, channel);
> + if (sidx < 0)
> + return sidx;
> +
> + ret = asus_wmi_ec_get_cached_value_or_update(sensor_data, sidx, &value);
> + if (ret)
> + return ret;
> +
> + info_index = ec->sensors[sidx].info_index;
> + *val = asus_wmi_ec_scale_sensor_value(value, known_ec_sensors[info_index].type);
> +
> + return ret;
> +}
> +
> +static int asus_wmi_ec_hwmon_read_string(struct device *dev,
> + enum hwmon_sensor_types type, u32 attr,
> + int channel, const char **str)
> +{
> + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
> + struct asus_wmi_ec_info *ec = &sensor_data->ec;
> + int sensor_index;
> +
> + sensor_index = asus_wmi_ec_find_sensor_index(ec, type, channel);
> + *str = known_ec_sensors[ec->sensors[sensor_index].info_index].label;
> +
> + return 0;
> +}
> +
> +static umode_t asus_wmi_ec_hwmon_is_visible(const void *drvdata,
> + enum hwmon_sensor_types type, u32 attr,
> + int channel)
> +{
> + const struct asus_wmi_sensors *sensor_data = drvdata;
> + const struct asus_wmi_ec_info *ec = &sensor_data->ec;
> + int index;
> +
> + index = asus_wmi_ec_find_sensor_index(ec, type, channel);
> +
> + return index < 0 ? 0 : 0444;
> +}
> +
> +static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info *asus_wmi_hwmon_chan,
> + struct device *dev, int num,
> + enum hwmon_sensor_types type, u32 config)
> +{
> + u32 *cfg;
> +
> + cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL);
> + if (!cfg)
> + return -ENOMEM;
> +
> + asus_wmi_hwmon_chan->type = type;
> + asus_wmi_hwmon_chan->config = cfg;
> + memset32(cfg, config, num);
> +
> + return 0;
> +}
> +
> +static const struct hwmon_ops asus_wmi_ec_hwmon_ops = {
> + .is_visible = asus_wmi_ec_hwmon_is_visible,
> + .read = asus_wmi_ec_hwmon_read,
> + .read_string = asus_wmi_ec_hwmon_read_string,
> +};
> +
> +static struct hwmon_chip_info asus_wmi_ec_chip_info = {
> + .ops = &asus_wmi_ec_hwmon_ops,
> +};
> +
> +static int asus_wmi_ec_configure_sensor_setup(struct device *dev,
> + const enum known_ec_sensor *bsi)
> +{
> + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
> + struct asus_wmi_ec_info *ec = &sensor_data->ec;
> + struct hwmon_channel_info *asus_wmi_hwmon_chan;
> + const struct hwmon_channel_info **asus_wmi_ci;
> + int nr_count[hwmon_max] = {}, nr_types = 0;
> + const struct hwmon_chip_info *chip_info;
> + const struct ec_sensor_info *si;
> + enum hwmon_sensor_types type;
> + struct device *hwdev;
> + int i, ret;
> +
> + ret = asus_wmi_ec_fill_board_sensors(ec, bsi);
> + if (ret)
> + return ret;
> +
> + if (!sensor_data->ec.nr_sensors)
> + return -ENODEV;
> +
> + for (i = 0; i < ec->nr_sensors; i++) {
> + si = &known_ec_sensors[ec->sensors[i].info_index];
> + if (!nr_count[si->type])
> + nr_types++;
> + nr_count[si->type]++;
> + }
> +
> + if (nr_count[hwmon_temp]) {
> + nr_count[hwmon_chip]++;
> + nr_types++;
> + }
> +
> + /*
> + * If we can get values for all the registers in a single query,
> + * the query will not change from call to call.
> + */
> + asus_wmi_ec_make_block_read_query(ec);
> +
> + asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types, sizeof(*asus_wmi_hwmon_chan),
> + GFP_KERNEL);
> + if (!asus_wmi_hwmon_chan)
> + return -ENOMEM;
> +
> + asus_wmi_ci = devm_kcalloc(dev, nr_types + 1, sizeof(*asus_wmi_ci), GFP_KERNEL);
> + if (!asus_wmi_ci)
> + return -ENOMEM;
> +
> + asus_wmi_ec_chip_info.info = asus_wmi_ci;
> + chip_info = &asus_wmi_ec_chip_info;
> +
> + for (type = 0; type < hwmon_max; type++) {
> + if (!nr_count[type])
> + continue;
> +
> + ret = asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan, dev,
> + nr_count[type], type,
> + hwmon_attributes[type]);
> + if (ret)
> + return ret;
> +
> + *asus_wmi_ci++ = asus_wmi_hwmon_chan++;
> + }
> +
> + dev_dbg(dev, "board has %d EC sensors that span %d registers",
> + ec->nr_sensors, ec->nr_registers);
> +
> + hwdev = devm_hwmon_device_register_with_info(dev, "asus_wmi_ec_sensors",
> + sensor_data, chip_info, NULL);
> +
> + return PTR_ERR_OR_ZERO(hwdev);
> +}
> +
> +static int asus_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> + struct asus_wmi_sensors *sensor_data;
> + struct asus_wmi_data *board_sensors;
> + const struct dmi_system_id *dmi_id;
> + const enum known_ec_sensor *bsi;
> + struct device *dev = &wdev->dev;
> +
> + dmi_id = dmi_first_match(asus_wmi_ec_dmi_table);
> + if (!dmi_id)
> + return -ENODEV;
> +
> + board_sensors = dmi_id->driver_data;
> + if (!board_sensors)
> + return -ENODEV;
> +
> + bsi = board_sensors->known_board_sensors;
> +
> + sensor_data = devm_kzalloc(dev, sizeof(*sensor_data), GFP_KERNEL);
> + if (!sensor_data)
> + return -ENOMEM;
> +
> + mutex_init(&sensor_data->lock);
> +
> + dev_set_drvdata(dev, sensor_data);
> +
> + return asus_wmi_ec_configure_sensor_setup(dev, bsi);
> +}
> +
> +static const struct wmi_device_id asus_ec_wmi_id_table[] = {
> + { ASUSWMI_MONITORING_GUID, NULL },
> + { }
> +};
> +
> +static struct wmi_driver asus_sensors_wmi_driver = {
> + .driver = {
> + .name = "asus_wmi_ec_sensors",
> + },
> + .id_table = asus_ec_wmi_id_table,
> + .probe = asus_wmi_probe,
> +};
> +module_wmi_driver(asus_sensors_wmi_driver);
> +
> +MODULE_AUTHOR("Ed Brindley <kernel@...davale.org>");
> +MODULE_AUTHOR("Eugene Shalygin <eugene.shalygin@...il.com>");
> +MODULE_DESCRIPTION("Asus WMI Sensors Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.33.0
>
Powered by blists - more mailing lists