| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 31 Oct 2021 19:19:02 +0200
From: Oded Gabbay <ogabbay@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: Ohad Sharabi <osharabi@...ana.ai>
Subject: [PATCH 4/4] habanalabs: use variable poll interval for fw loading
From: Ohad Sharabi <osharabi@...ana.ai>
Using a variable poll interval for fw loading allows us to support
much slower environments (emulation) while changing only a single
line in the code, instead of choosing a different interval in each
function that polls.
Signed-off-by: Ohad Sharabi <osharabi@...ana.ai>
Reviewed-by: Oded Gabbay <ogabbay@...nel.org>
Signed-off-by: Oded Gabbay <ogabbay@...nel.org>
---
drivers/misc/habanalabs/common/firmware_if.c | 35 ++++++++++---------
drivers/misc/habanalabs/common/habanalabs.h | 5 +++
.../misc/habanalabs/common/habanalabs_drv.c | 3 ++
3 files changed, 27 insertions(+), 16 deletions(-)
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 8cbec10cddb1..c68ad4d7b1bb 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -15,8 +15,6 @@
#define FW_FILE_MAX_SIZE 0x1400000 /* maximum size of 20MB */
-#define FW_CPU_STATUS_POLL_INTERVAL_USEC 10000
-
static char *extract_fw_ver_from_str(const char *fw_str)
{
char *str, *fw_ver, *whitespace;
@@ -1102,7 +1100,7 @@ static int hl_fw_read_preboot_caps(struct hl_device *hdev,
(status == CPU_BOOT_STATUS_NIC_FW_RDY) ||
(status == CPU_BOOT_STATUS_READY_TO_BOOT) ||
(status == CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT),
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
timeout);
if (rc) {
@@ -1286,11 +1284,7 @@ int hl_fw_read_preboot_status(struct hl_device *hdev, u32 cpu_boot_status_reg,
{
int rc;
- /* pldm was added for cases in which we use preboot on pldm and want
- * to load boot fit, but we can't wait for preboot because it runs
- * very slowly
- */
- if (!(hdev->fw_components & FW_TYPE_PREBOOT_CPU) || hdev->pldm)
+ if (!(hdev->fw_components & FW_TYPE_PREBOOT_CPU))
return 0;
/*
@@ -1436,7 +1430,7 @@ static int hl_fw_dynamic_wait_for_status(struct hl_device *hdev,
le32_to_cpu(dyn_regs->cpu_cmd_status_to_host),
status,
FIELD_GET(COMMS_STATUS_STATUS_MASK, status) == expected_status,
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
timeout);
if (rc) {
@@ -2070,7 +2064,7 @@ static int hl_fw_dynamic_wait_for_boot_fit_active(struct hl_device *hdev,
status,
(status == CPU_BOOT_STATUS_READY_TO_BOOT) ||
(status == CPU_BOOT_STATUS_SRAM_AVAIL),
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
dyn_loader->wait_for_bl_timeout);
if (rc) {
dev_err(hdev->dev, "failed to wait for boot\n");
@@ -2097,7 +2091,7 @@ static int hl_fw_dynamic_wait_for_linux_active(struct hl_device *hdev,
le32_to_cpu(dyn_loader->comm_desc.cpu_dyn_regs.cpu_boot_status),
status,
(status == CPU_BOOT_STATUS_SRAM_AVAIL),
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
fw_loader->cpu_timeout);
if (rc) {
dev_err(hdev->dev, "failed to wait for Linux\n");
@@ -2296,6 +2290,15 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
goto protocol_err;
}
+ /*
+ * when testing FW load (without Linux) on PLDM we don't want to
+ * wait until boot fit is active as it may take several hours.
+ * instead, we load the bootfit and let it do all initializations in
+ * the background.
+ */
+ if (hdev->pldm && !(hdev->fw_components & FW_TYPE_LINUX))
+ return 0;
+
rc = hl_fw_dynamic_wait_for_boot_fit_active(hdev, fw_loader);
if (rc)
goto protocol_err;
@@ -2388,7 +2391,7 @@ static int hl_fw_static_init_cpu(struct hl_device *hdev,
cpu_boot_status_reg,
status,
status == CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT,
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
fw_loader->boot_fit_timeout);
if (rc) {
@@ -2411,7 +2414,7 @@ static int hl_fw_static_init_cpu(struct hl_device *hdev,
cpu_msg_status_reg,
status,
status == CPU_MSG_OK,
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
fw_loader->boot_fit_timeout);
if (rc) {
@@ -2440,7 +2443,7 @@ static int hl_fw_static_init_cpu(struct hl_device *hdev,
(status == CPU_BOOT_STATUS_NIC_FW_RDY) ||
(status == CPU_BOOT_STATUS_READY_TO_BOOT) ||
(status == CPU_BOOT_STATUS_SRAM_AVAIL),
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
cpu_timeout);
dev_dbg(hdev->dev, "uboot status = %d\n", status);
@@ -2489,7 +2492,7 @@ static int hl_fw_static_init_cpu(struct hl_device *hdev,
cpu_boot_status_reg,
status,
(status == CPU_BOOT_STATUS_BMC_WAITING_SKIPPED),
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
cpu_timeout);
if (rc) {
@@ -2509,7 +2512,7 @@ static int hl_fw_static_init_cpu(struct hl_device *hdev,
cpu_boot_status_reg,
status,
(status == CPU_BOOT_STATUS_SRAM_AVAIL),
- FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ hdev->fw_poll_interval_usec,
cpu_timeout);
/* Clear message */
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index b3c6b660c7aa..5fc9cfd892e8 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -61,6 +61,9 @@
#define HL_CPUCP_INFO_TIMEOUT_USEC 10000000 /* 10s */
#define HL_CPUCP_EEPROM_TIMEOUT_USEC 10000000 /* 10s */
+#define HL_FW_STATUS_POLL_INTERVAL_USEC 10000 /* 10ms */
+#define HL_FW_STATUS_PLDM_POLL_INTERVAL_USEC 300000000 /* 300s */
+
#define HL_PCI_ELBI_TIMEOUT_MSEC 10 /* 10ms */
#define HL_SIM_MAX_TIMEOUT_US 10000000 /* 10s */
@@ -2459,6 +2462,7 @@ struct multi_cs_data {
* @last_open_session_duration_jif: duration (jiffies) of the last device open
* session.
* @open_counter: number of successful device open operations.
+ * @fw_poll_interval_usec: FW status poll interval in usec.
* @in_reset: is device in reset flow.
* @curr_pll_profile: current PLL profile.
* @card_type: Various ASICs have several card types. This indicates the card
@@ -2607,6 +2611,7 @@ struct hl_device {
u64 last_successful_open_jif;
u64 last_open_session_duration_jif;
u64 open_counter;
+ u64 fw_poll_interval_usec;
atomic_t in_reset;
enum hl_pll_frequency curr_pll_profile;
enum cpucp_card_types card_type;
diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index 949d1b5c5c41..5989826701bc 100644
--- a/drivers/misc/habanalabs/common/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -345,6 +345,9 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
set_driver_behavior_per_device(hdev);
+ hdev->fw_poll_interval_usec = hdev->pldm ? HL_FW_STATUS_PLDM_POLL_INTERVAL_USEC :
+ HL_FW_STATUS_POLL_INTERVAL_USEC;
+
hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
hdev->prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT;
--
2.25.1
Powered by blists - more mailing lists